Resume - Heavy Equipment Operator

Misco Jobs

Resume #52100

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Seeking a approximately $23.00/Hr. + Benefit package Journeyman Heavy Equipment Operator and/or Class 8 Truck Driver

SUMMARY
My name is David Paul Schenk, born in Billings, Montana, August 2, 1958 to Fred and Ruth Schenk. I attended Forsyth Public Schools continuously, until my graduation in 1976. I lived and worked on my parents farm/ranch/trucking operation though school and intermittently to current date.

John Prince of Prince Inc., a sand gravel /specialized transportation business, hired me in 1975 to perform light maintenance on heavy equipment, class 8 trucks and light vehicles, also performed shop cleanup and equipment cleaning. This I done after school and when I graduated from high school I also operated the equipment until 1977.

At that time I applied for and was considered for a operators position at Rosebud County Road Department, where I operated equipment and performed all phases of equipment, road, highway and building maintenance.

In 1980, I applied for and was awarded a position at Peabody Coal Co.'s Big Sky Mine located south of Colstrip, Montana. I performed labor tasks, operated heavy and stationary equipment, as well performed down to last bolt repairs of same equipment, as a class 1 mechanic.

A hobby of rebuilding car engines got me interested in the business of remanufacturing gas and diesel engines, and 1985, after much thought I decided to operate my own business full time. I operated DC Machine from 1979 to 1994, where I learned about the impact of public relations and accounting. The competition in my area became so fierce that no money could be made. Even though my clientele was fairly large, the loyalty was becoming harder for them to justify the extra cost. So I ceased operations, applied for other work, and I am proud to say that I continued to honor any possible warranty problems until my obligation was cleared.

Bart Kraus, of the Rosebud County Road Department, hired me June of 1994, to fill a shop mechanic position, which I held until in 1999, when major tax roll reductions caused a major reduction in labor, including the mechanic position.

At the end of 1999, I applied for and was hired by Scott Wagner, of High Plains Stone Company in Littleton, CO. At High Plains Stone Company I am responsible for all shop building maintenance and repair as well as satellite shop buildings and all equipment, mobile and stationary, down to last bolt rebuilding as well as accounting and purchasing.

My continuing education has come from the "School of Hard Knock's" of which I am still enrolled in. With an exception of a few seminars, my ability to find, read, understand and apply service and technical information has allowed me to perform quality repairs and accurate cost accounting figures. I feel that I have had exposure to many facets of heavy thru light equipment management, operation, maintenance and all phases of repair, to be a valued employee that would allow me to do the best possible job for you.

Thank you for taking the time to look over what I have to offer and I
look forward to an interview with you.

David P. Schenk
WORK HISTORY
High Plains Stone Company
13630 Blakeland Court
Littleton, CO 80125 Mechanic
303-791-1862 Scott Wagner, Owner

Hired on as 1 of 3 mechanics on late 1999, Remained as sole mechanic and became responsible for all shop, equipment and stationary equipment last to last bolt repair. I was responsible for creating and maintaining a maintenance plan, recording said plan and a permanent record and performing all phases of maintenance and down to last bolt repairs to all company owned mobile and stationary equipment. The following tools used, other than typical hand tools, include Caterpillar Press Group, Caterpillar portable line boring tools. Down to last bolt repairs include following equipment; Cat 910, Fiat/Allis 545B, Clark 55, Waldon 6000C, Euclid 71-64, OMC 880 loaders, Teledyne fork lift, Grove TM250 hydraulic crane, Ford 555A back hoe, Mack, Kenworth, Peterbilt class 8 trucks and various flat and drop deck 40' + trailers, as well as 20 Ton tag trailers.

Rosebud County Road Department Lead Mechanic 1994-1999
PO Box 1117
Forsyth, MT 59327
406-356-2261 Virgil Farris, Road Superintendent
Hired on as a shop mechanic, in a few months I asked for and was awarded a raise in pay. I did not get what I asked for, but what the Commissioners offered was good and was also awarded lead mechanic. I was responsible for creating and maintaining a maintenance plan, recording said plan and a permanent record and performing all phases of maintenance and down to last bolt repairs to all County owned mobile and stationary equipment. The following tools used, other than typical hand tools, include Caterpillar Hose Press Group, Caterpillar Pressure Test Group, Caterpillar Engine Cranking and Charging Test Group, Caterpillar Tachometer Group, Caterpillar Nitrogen Charging Group, South Bend 18 x 96 engine lathe, JET bench top milling/drilling machine, Torch Mate track torch, Lincoln 205 MIG welder, Various adjustable hand reamers, Various micrometers, gages, and dial indicators, Mobile Air Conditioning Service Tooling, Linde Plasma Arc Torch, Smith and Victor Oxy/Acet torch, Snap-On Charging, Starting and Battery Analyzer and retrieved information from Caterpillar's Service Information Retrieval System, Truck Engine Magazine. When needed in the field, I also performed manual labor, repaired and operated equipment, which include the following equipment; Caterpillar D7G, 966D, 627B, 627F, 140G, 140H, and 12E, Clark 75C and L30, John Deere 644B, 644G 862B, 770AH,770BH, 310D and 450G, Ford, Peterbilt, Kenworth, White and Autocar class 8 trucks, and belly dump gravel trailers as well as a detachable gooseneck 50 Ton lowboy trailer. I have actively been involved in repair parts procurement for equipment and supplies for road maintenance while complying with the Value Engineering law and working well with in the limits of budgets. In 1999, the repair parts was in complete compliance with the General Accounting Office's, in Washington DC, procedure of accounting requirements. This task was done with an inventory control file that I created, and has automated, increased the reliability and accuracy of the inventory, that is based on Microsoft's Work for Windows 95. This is very desirable because I can adjust all fields to fit the job required at any time, something that can not be done with canned programs. In 1997, my supervisor and I purchased and installed Caterpillar Inc.'s Maintenance Control System. The features of this program provided enough information for us make accurate and reliable comments to the Commission on the condition, operating cost, availability and when to trade, all of the counties equipment. Also a feature of the program helped us with accurate figures for budget purposes. This has saved county taxpayers $100,000.00 over the last 2 years and has allowed the mills to the road department to lower!!

I was also directly involved with compliance with DEQ regulations, including the conception, research, design on CAD, procurement of supplies, actual construction and submittal of compliance of Class V Injection Well regulations, to the DEQ. Attended OSHA and MSHA safety inspections and made sure all problems found were corrected.
In the absence of the Superintendent, I was responsible for 22 employees and was also involved in the hiring process. Warranty and follow up consideration of newer equipment was also an item that I was responsible for and was directly involved in projecting figures for annual budget calculation.

DC Machine, Owner 1979-1994
A hobby of rebuilding engines generated enough interest to make owning and operating my own business very possible, so I purchased a few more pieces of equipment to round out existing equipment, and started out making big money. My business specialized in the complete remanufacture of gasoline and diesel engines, starting motors and alternators. Operations included hot tank cleaning, crack detection, complete head work using a Winona/Van Norman head machine, Sioux valve and valve seat reconditioning equipment, cylinder block reboring with a Van Norman portable boring bar and honing with hand hones, block deck and cylinder head fire deck resurfacing on a Winona/Van Norman surface grinder, crankshaft measurement and condition determination with Starrett tools, regrinding and polishing on a Van Norman 111 crankshaft grinder, and connecting rod rebuilding with Sunnen Rod reconditioning equipment. I also provided general machining services using a New Haven 36 x 144 engine lathe, Cincinnati Super #3 milling machine, indexing parts of a circle with either a rotary or a dividing head.

Peabody Coal Co. Class I Mechanic 1980-1985
Big Sky Mine
PO Box 97
Colstrip, MT 59323 Tracy L. Hendricks, Mine Superintendent
Hired on as a Driller/Shooter, where I was responsible with maintenance and operation of a BE 50R blast hole drill, BE 40R blast hole drill, the loading of blast holes, tying in, calculating and shooting of the shot.
Bid on and was awarded an operators position. The various equipment include, Caterpillar's 16G, D8K, D9G, D9H, D9L, 633D, 637D, Clark 475B, DART 150 ton bottom dump coal hauler and Euclid 80 ton bottom dump coal hauler.
Bid on and was awarded 1st Class Mechanic position, performing complete maintenance and down to last bolt repairs of heavy, light and stationary equipment. The following special tools, other than hand tools, include Caterpillar Air Conditioning Service Tool Group. Caterpillar Hose Assembly Press Group, Cummins Injector Adjustment Tooling, Caterpillar Fuel Injection and Governor Setting Tool Group.

EDUCATION

Graduated 1976, with B Honors, from Forsyth High School, Forsyth, Montana

COMPUTER SKILLS

I purchased an IBM XT in mid 80's. Wrote some programs using the BASICA that was installed in the computer and ran my business with a DAC Easy Accounting software. In 1996, I purchased an IBM Aptiva, running Window 95' and Microsoft Works for IBM, Soft Key CAD Complete, Caterpillar Inc. MCS, Kodak and Micrografx Picture Publisher and Quicken Accounting software. At Rosebud County, I operated a IBM clone and Compaq laptop, running Windows 95', Microsoft Works for IBM, Caterpillar Inc. MCS, Kenwood radio programming software, Ecad, Explorer 4.0 and Quick Books. Recently operating Hewlett/Packard Pavilion mx70 running Microsoft Windows ME.

LICENSES & CERTIFICATES

I have a Colorado Class A, Type I CDL with the air brake restriction removed and have doubles/triples, tanker endorsements.

Have received certificates on;
The purchase of R12 to service mobile air conditioning systems.
Federal DOT truck air brake service and adjustment VIA Montana Motor Carriers Association
Federal DOT certification to perform annual safety inspections VIA Montana Motor Carriers Association.
Federal Drug Testing Procedures VIA Montana Motor Carriers Association
Enrollment with Service Technicians Society of the SAE
Attendance of Basic Medic First Aid/CPR Course
Mine Safety and Health Administration Surface Metal/Non-Metal new miner training.
Federal DOT truck air brake service and adjustment VIA Colorado Motor Carriers Association
Federal Drug and Alcohol Testing procedures VIA Colorado Motor Carriers Association
Federal Record Keeping and Compliance VIA Colorado Motor Carriers Association

Have attended and are aware of;
Federal and Montana State Storm Water Runoff Regulations
Federal and Montana State Class V Injection Well Regulations
Montana State Underground Storage Tank Regulations.
OSHA regulations enforced by the DOT
MSHA regulations
National Fire Code
Department of Environmental Quality
EPA regulations

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 995)

Go to Search Parameters...

Brief Description

A suitable engineering responsibility to help the Afghan reconstruction processes or assist the US Army Corps of Engineers in Afghanistan or Central Asia.

Well versed in Primavera applications (P3,P6, Expedition 10.1); Well versed with SAP PS & MM modules application; Well versed with Cost Engineering/Cost Control applications & processes

Communicates well at all levels, high integrity and personal commitment.Good organisation and leadership skills.

Comprehensive knowledge and experience of long distance material handling systems, fixed and mobile plant and associated ancillary equipment

Free! Operator

More than 30 years of experience in Control & Instrumentation field, out of which 28 years in a leading Engineering Consultancy organization MECON Ltd. (Govt. of India Undertaking) in Steel, Non-Ferrous, Chemical, Petrochemical & Power

You will not find a more qualfied canidate for the position. I have worked in a variety of positions that give me "hands on" experience that cannot be found in a classroom.

PRODUCTION PLANNER,PRODUCTION CONTROL 25+YEARS EXPERIENCE

A self motivated metallurgist who is presently working with Ispat Metallics India Ltd (Ispat Group) as Engineer production, has wide range of experience in commissioning and Operations including excellent exposure to Level 2 models, wishing to pursue his career in an environment where his technical

Proven Project Manager who excels in communication and leadership. Experience in commercial and residential construction. Understands the value of ahead of schedule and under budget.

Engineer with Business management,

Crawler Crane Operator

Experienced in plant O & M(power plant/LPG Terminal),execution of expansion/greenfield projects,material procurement,tendering/contracts management as well as statutory compliance

GA class III wastewater license, 40HR HAZWOPER certified, excellent computer skills, Does have a valid US passport

As an experienced civil/Building engineering (more than twenty years) I am willing to participate in your construction projects.

Discovered 2 World Class & 2 Medium Size ore deposits - base and precious metals, gold, platinum, iron, open pit, under developed contries, Spanish, Portuguese, English, reg mining engineer & geologist USA & Brazil, Central & South America, Africa, Amazon, excellent Vice President, General Manager

-Primavera Scheduler -SAP Experience -MS Office SME

Quantity Surveyor (Civil OR Joinery), Site Supervising, Read Drawings, Design for Interiors, Computer knowledge.

I have wide experience (more than 22 Years) in Maintenance & Project field in Ammonia Refrigeration Plant, ice-cream, Dairy & Pharmaceutical Industries.

Heavy Equipment Operator

Receving, storage of material, inbound and outbound logistics, inventory management, sap user,shipping

Instrument Supervisor

Mechanical Superintendent

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I have over ten years in the asphalt plant field. I am willing to relocate to just about anywhere in the world for the right job

I have worked as a project manager on large job sites particularly in the areas of waterproofing and roofing. I have experience managing large and multi-cultural crews under high stress and hard deadlines.

Seeking full time employment with a construction company who is need of a Loader Operator. Doesn't matter where I'm willing to move.

A chemical engineer with 30+ years successful track record in oil & gas, EPC and chemical industries in India and abroad seeking contract jobs or assignments

OBJECTIVE To obtain a Full Time Position as a Project Manager, Construction Project Manager, Site Manager, or Site Superintendent in the Wireless Industry.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

I'm a Lead Mechanical Technician with over 15 years experience with a major Oil and Gas Company and with considerable background in production engineering work. Served a mechanical engineering apprenticeship with a diploma in process engineering.

Cost Controller with strong accounting background. Over 2 years experience as cost controller and 14 years as accountant with multinational companies. Technical skills include preparation of project cost control plans, budgets and forecasts, cost tracking, cost and revenue analysis etc.

Installation, Operation and Maintenance Engineer (Mechanical)

12 + Years HSE experience, 27 + years overall experience on International Oil & Gas projects, dedicated professional with a hands on approach to maintaining the highest possible levels of safety. Effective organizational and good training skills; Experienced in onshore & offshore Middle East; Asia

Need a hot new job - crane operator

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Senior Project Management, Profit and Loss, Project Planning, development and execution. Consultancy in the areas of safety, risk management, and techncal writing and editing. Major contract administration for a multi-national firm in Saudi Arabia on two different assignments.

Approximately 3 years experience in Production Planning, Scheduling & Inventory Control, ERP(BaaN)implementation, Production, Manufacturing, Industrial Engg., Production Management, Process Re-engg., Product Development, Product Costing.

Logistics and Procurement Specialist

Planning, Scheduling and Cost Control Engineer

Control & Instrument Commissioning / Maintenance Engineer 01.10.2006

A higly qualified technocrat having more than 33 years of experiance inoperations, projects, and marketing.

Shipyard Coatings Program Manager

Bachelor of engineering in mechanical engineering and have more than 18 year experience in mechanical maintenance & projects, condition mointoring in cement plant and steel plant

Over 22 years experience with sour oil & gas processing, acid gas injection, and heavy oil production facilities, on and off-shore. Over twelve years managing various technical support, trades and operations staff. Over nine years of overseas/foreign experience.

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Freelance civil engineer with dredge / rockworks / seadefense experience

Machine Operator

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out