Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #61086
next resume »»
CONTACT INFORMATION:
Key Skills
* Commissioning & Start-up
* Construction Management
* Engineering & Design
* DCS and ESD logic testing
* Fire & gas system testing
* Loop testing and tuning
* Calibration & Maintenance
* PLC programming
* Commissioning Procedure development
* Operations support
* Factory acceptance testing(FAT)
* Management of design changes
Relevant Experience
Commissioning & Start-up
* Sangachal Terminal Expansion project (STEP)- BP Azerbaijan April 2006 to present
Senior instrument technician and coach for a 1,000,000 barrel per day oil terminal. Duties include start up and commissioning of new production trains and developing CMMS maintenance programs for existing operating systems, while mentoring, training and evaluating local staff for eventual nationalization of the facility and pipelines utilizing the CMAS system.
* Western Libya gas project - Sabratha offshore platform Saipem 2004-05
Commissioning and start-up of a 2 train gas separation platform. Performed loop testing, control system logic testing and validation, fire and gas system testing as well as project completion database management utilizing WinPCS software.
* Atlantic LNG Expansion project - Trinidad, West Indies Bechtel International 2002-03
Commissioning and start-up of a 2 train LNG plant. Performed loop testing, control system logic testing and validation, fire and gas system testing as well as final punch list clearance and final handover to client.
* ADNOC Onshore gas Dev. Phase II - Habshan, Abu Dhabi-U.A.E. Technip, Middle East 2000-01
Commissioning and start-up of a 3 train gas separation plant. Performed loop testing, control system logic testing and validation, fire and gas system testing. Managed vendors for final site testing and commissioning of fired heaters, compressors, generators and chillers.
Construction and Maintenance
* General Motors/Opel assembly plant - Rayong, Thailand Morrison Knudsen, Thailand 1998-99
Technical services manager for maintenance program provider. Responsible for developing and implementing preventative and breakdown maintenance for the entire facility including all utilities plants. Hiring and training a local staff of over 90 employees.
* Combined Cycle power generation project – Saraburi, Thailand MMR Asia, Ltd 1997-98
Electrical/Instrument superintendent for a 110MW CCGT power plant. Responsible for installation and testing of all plant electrical and instrument control systems. Assisted plant operators in commissioning and start-up.
* UNOCAL Geothermal power project – West Java, Indonesia Fluor Daniel Int'l 1997
Instrument/Electrical field engineer for a 200MW geothermal power plant. Duties included resolving engineering and design problems and developing system status and turnover databases for client acceptance. Supervised engineering staff of 6 nationals and assisted loop checking and commissioning with plant operators.
* Monsanto Premier Kasei ABS/SAN plastics – Rayong, Thailand Morrison Knudsen, Thailand 1995-96
Instrument/Electrical superintendent. Responsible for installation and control system logic testing and validation. Supervised subcontractors and managed all design queries and change requests for client.
SADAF EB/Styrene Expansion Project – Jubail, KSA Raytheon 1994
Instrument/Electrical superintendent for an EB/Styrene expansion project. Supervised subcontractors for all installation. Responsible for loop checking and final handover to client. Assisted plant operators with start-up and commissioning as well as final punch-list clearance.
* Mobil CCR/Aromatics – Jurong, Singapore Raytheon 1992-93
Instrument superintendent for a major plant expansion project. Supervised subcontractors for all installation. Responsible for loop checking and final handover to client. Assisted plant operators with start-up and commissioning as well as final punch-list clearance.
Engineering and Design
* Badger Design and Constructors - Tampa, Florida 1990-92
Senior designer in the control systems department. Responsible for developing all drawings and specifications associated with various petrochemical projects; including loop drawings, schematics, marshalling panels, control panels, raceway layouts, bills of material, instrument specifications, etc. Utilised AutoCAD and Microstation CADD software.
* MK Ferguson - Cleveland, Ohio 1988-90
Lead designer in the control systems department. Responsible for developing all drawings and specifications associated with various DOW Chemical projects; including logic diagrams, loop drawings, schematics, marshalling panels, control panels, raceway layouts, bills of material, instrument specifications, etc. Utilised AutoCAD and Microstation CADD software.
* Matrix Technologies - Toledo, Ohio 1981-88
Senior designer in the control systems department. Responsible for developing all drawings and specifications associated with various petrochemical projects; including loop drawings, installation details, schematics, marshalling panels, control panels, raceway layouts, bills of material, instrument specifications, etc. Performed plant surveys and as built existing client documents.
* AVCA Corporation - Toledo, Ohio 1980
Instrumentation and electrical draftsman
Education and training
Offshore survival certificate – OPITO BSIET/HUET issued Oct. 29, 2004 Pavia, Italy
Allen Bradley SLC PLC orientation, 2002
BS Electrical engineering – Trinity College, 2002
Siemens S7 PLC programming, Bangkok, Thailand 1999
Allen Bradley Series 2 programming course, Detroit, Michigan 1984
Fisher control valve sizing and selection, Solon, Ohio1983
Engineering mathematics, University of Toledo 1985/86
Electronics with mathematics, Grantham College of Engineering 1995/96
Bently Nevada 3500 Monitoring system training course – Baku, Azerbaijan 2007
COMPEX Hazardous area training – Singapore April 2007
Nationality: American
Date of birth: April 28, 1961
References furnished upon request
next resume »»
Search Results (Resumes 1 to 50 of 1004)
Go to Search Parameters...
Brief Description
Free!
Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.
Free!
EXPERIENCED HIGHLY COMPETENT HSE PROFESSIONAL
Free!
I have 28 years of production and reorganizing operations to maximize their production and maintenance.
Free!
Working on projects for various E&P Companies and Contractors
Free!
15+ years experience HSE oilfield operations. Experience includes seismic, drilling, completions, construction with extensive exposure to heli-portable. Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.
Free!
E&I Supervisor with 28 years service in all divisions of the electrical industry
Free!
Good communication skills, Able to work with no supervision. Self Motivated,team leader. Extensive organising,work prioritisation and related Skills. Proficient using Maximo and Federal Supply System. Knowledgable with Excel,Microsoft Access,Windows Xp
Loader Operator/Truck Driver
Catering Operation Manager, French, fluent in English, Spanish, indonesian and Malay, seek position anywhere. Ready to move anytime
Project Manager: Responsible of the coordination and execution of the following projects: • Warehouse Management System (Oracle WMS) • Overall Revision to the actual ACP Master Catalog . Inventory Re-engineering Program
Instrument Quality Control Inspector / Quality Control Engineer, Field Instrument Engineer & Field Instrument Supervisor
I have worked many years in the construction field and I have knowledge of all aspects from ground breaking to completion.
For my fifteen years experienced in construction, as a site/ project engineer, I have more on experience in horizontal project like earthmoving works, site and land development works and road works. Some of my experienced are attached on my resume for your guidance and evaluation.
Senior material controller with great experience in western companies.Have a technical education and professional expertise in various computer softeware and hardware.Known as a good communication person with leadership skill.
As an Architect Inspector and Sr.QA/QC Engineer my primary responsibility is to control the quality of construction, so that I can best serve the project by preventing mistakes before they happen rather than finding them after the fact. And I am responsible to ensure that the quality control of the
Cement Production Supervisor // Senior Cement Process Engineer //
Surface Sciences, Polymer Chemistry and Physics, UHV Techniques, Materials Sciences, Thin Film, Single Crystal.
Results orientated, hands on multitasked, multifunctional, dedicated manager. experienced in materials. Systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.
Manager. Supervised and coordinated the activities of production and operating workers, such as inspectors, precision workers, machine setters and operators, assemblers, fabricators, and plant and system operators
• Perspective gained through advancement from field operations, through front-line supervision to senior staff management and administrative positions.
Civil Engineer specialist to cast_in_place bored piles and Marine Piled Jetties, Block Concrete Quays
Safety Management Position
Operate a machine on a assembly line, especially operate a automatic welding machine.
I believe that my vast experiences in the various facets of construction organization entitle me as the suitable candidate for this position. My academic qualification, exposures and experience have given me an in depth working knowledge in overall functions of the Construction Project Management.
Crane Operator with 14 years experience in Off-shore Operation, Drilling and Construction, and 6 years experience in On-shore Construction Oil Industry.
Remote Site Expert : Global Experience.
Extensive experience covering contract logistics, import/export, warehousing, general transport/heavy haulage, distribution, freight forwarding and customs & shipping activities at all levels of management within the mining industry.
15 + Yrs Exp. In Secretarial, Accounts, Computer, Admin, Purchase & Stores. Etc
Project engineering which involves inspection of instruments like control valves, on off valves, valve actuators, various type of analyzers etc.
I would like to apply for a senior /executive position of highway /infrastructure projects
Extensive experience in the construction industry in the field of architectural and civil/structural works of residenses, townhouses, condominiums and commercial buildings including interior and exterior finishing details. A highly motivated project supervisor, proven ability to solve site problems.
Looking for growth
Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant
Have experience running track excavators, dozer, roller, grader, backhoe, skiddsteer, haul trucks, semi truck, many more and class a cdl, run family company in construction and excavation for over 10 years
as per attached
IO havew worked in the Cable and Telecommunications field for thirteen years in operations. I have managed Health and Safety, Plant Damage, Contract Vendors and our Inhouse construction departments through the thirteen years.
June 2003 ©¦EPresent Company: JGC Corp Location: China Position : Schedule Controller May 2002 ¨C March 2003 Company: FAFCO Location: Saudi Arabia Position : Planning & Scheduling Engineer
35 continuous years of national and international commercial construction experience
Experienced in power plant operations and startup.
Supply Chain Management, Cost Reduction, Global Product Management, Inventory Planning, Process Development, Cost Management, Vendor Management and Relationships
Geodesist/Land Surveyor/Geomatics/GIS consultant
Power Generation- Twenty-eight years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems as Lead Mechanical, Lead I&C, Lead Operations and Startup Plant Manager.
Driving, welding, logistical Skills
Hi Please consider my resume for future construction Procurement positions.
OBJECTIVE: To secure a position with a company, long term, that will allow me to use my over 24 years of experience in construction to benefit the company fully.
ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent
truck driver,heavy truck driver
Multi-talented/Multitasker - Facility / Safety Management, Hazardous materials Paramedic, trainer, Construction/General Industry background, Environmental compliance
Working in industries that include agricultural, aquacultural, construction, oil/gas exploration, production, refining and wood manufacturing my abilities, skills and qualifications are defined in my resume which only defines a small part of my true hands-on services performed at many levels.
Seasoned construction manager with over twenty years of progressive experience in commercial and industrial construction on both U.S. and worldwide projects in the following industries: Automotive, Semiconductor, Chemical, Cogeneration, Commercial Building, Food and Beverage, Institutional, Hospita
[ 1 ]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Seach Parameters
Change search parameters...
CATEGORIES:
Operations;
INDUSTRIES:
Construction;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com