Resume - Working experience - 16 years & 3 months. Highly skilled, experienced, expertise...

Misco Jobs

Resume #67588

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION

I am confident in my ability to be an efficient team worker. I am equally comfortable at working independently. I have always been keen to develop professionally and am ready for a new challenge

As an ethical, passionate worker, I am dedicated to rendering a quality service to my employer. I am a meticulous, professional person with an outstanding leadership record, skilled in managing and conducting whenever needed and at any task given to me. I am efficient and organized and a very hard worker. My track record speaks for itself. I am absolutely loyal and committed to my employer and expect the same in return.

I have an outstanding and vast amount of experience in my line of work and I also have a vast amount of experience working with diverse, multi cultural and ethnic societies all over the world and therefore I am able to adapt successfully to any given circumstance.

I am honest, reliable, inquisitive, positive, adaptable and determined to be a success in my job when given the opportunity.

PROFESSIONAL OBJECTIVE

To obtain a challenging career utilizing and expanding my practical experience, expertise and knowledge to be successful in everything I do and to be an asset and a success to an employer in the sense that my employer can benefit from my experience, knowledge and expertise.

I am ready and experienced to step up to a higher level in my career and I am confident that I will be a success.

WORKING EXPERIENCE – 16 YEARS & 3 MONTHS

8 years in New Zealand

1. I have worked at the Wellington based branch of Webster Drilling as well as extensively throughout New Zealand.
2. I regularly work overseas on contracts such as Samoa, Fiji Islands, Papua New Genii, Seychelles etc.
3. my duties at Webster Drilling were initially workshop orientated, fabricating the heliportable drilling rigs and compressors for various local and overseas projects, as well as maintenance of the fleet of drilling rigs.

My experience in the field was then utilized to do site surveys and operations, inclusive of my drilling knowledge. I am now currently between being a full time driller, both locally and abroad, and workshop technician when necessary.

8 years & 3 month in South Africa

1. I have worked in Swaziland, Lesotho, Botswana and various other places throughout Africa.
2. workshop and field service maintenance
3. on site mechanic and assisting with blasting
4. varied experienced in drill rig repairs
5. re-building of all CM350 to ECM351 crawler airtrack rigs, hammer rigs, and down-
hole hammers.
6. setting up and running workshops and stores on site and in the field
7. maintain and repair all vehicles and plant equipment, including major repairs to all types of low and high pressure compressors
8. supervision, instruction, and the re-building and management on pneumatic jack hammers
9. complete re-building and re-designing of all types of drill rigs including trackless and track driven
10. re-building of all LM500,550,600 & 660 hydraulic crawler rigs, Tamrock, Gardener, Denver, Furukawa & Ingersoll Rand rigs etc.
11. site supervision and set up

EDUCATION

Trade – Diploma/Certificate: Fully qualified Heavy earthmoving equipment mechanic – Olifantsfontein South Africa

Diplomas/Certificates: Earth Moving Equipment Mechanic
Practical Introduction to Oil Analysis
Hydraulic Rig Maintenance
LM500 Operator Technician
Hydraulic Rig Technician
DM30 Technician
LM500 Hydraulic Crawler Drill
Alpha Care – first aid
New Zealand Red Cross First Aid Certificate
2nd Regiment – South African Defense Force

Highest Standard passed: Year 12 – Benoni High School South Africa

EMPLOYMENT HISTORY

EMPLOYER: WEBSTER DRILLING & EXPLORATION LTD NEW ZEALAND

POSITION: Drilling Engineer / Workshop mechanic / Site Supervisor

DUTIES: My duties initially started with the utilization of my engineering skills in the workshop.I started with rebuilding track and truck mounted drilling rigs and moved onto the fabrication and repairs of the websters custom heli-portable rig.I then moved onto mass fabrication of these including many modifications for use abroad in various countries across the globe ie;papau new guinea,iran,Antarctica,pacific islands etc.

After about 3 years I was put in the field around new Zealand physically doing the drilling!My experience here has been varied ranging from anchor and retension drilling and testing,geotechnical soil and rock investigation work,scientific investigation drilling,monitoring bores and wells,seismic and trigonometric drilling,coring from nmlc to pq,

I particularly get allotted many difficult and challenging drill projects because of previous experience and my knack of ensuring the projects are completed from start to the all important finish!I have 15 years field experience now which definitely supports the challenge of difficult and arduous ground conditions especially in new Zealand!

Drill techniques I've used have been blast hole drilling with pneumatic/hydraulic top hole/down hole hammers and driftrers.Wash and air drilling,flushing and casing,concentrix and odex overburden casing,coring nmlc to pq.

Rigs have ranged in size from our 460kg heli-rigs to 36 ton heavy track blasthole rigs.

Repair and maintenance of a range of truck mounted, track baseframe, heliportable, tunnel drill, diggers and drill rigs. Design, manufacture and engineering of all components used on these machines. Site investigations, set up, client liaison, mobilization, drilling, demobilization and any restoration work required. Send on short and long term drilling projects both locally and overseas. Drilling includes geotechnical, scientific, environmental, monitoring and soil sampling, most types of anchor constructions.

PERIOD: October 2000 – current. (8 years)

EMPLOYER: B & E (BLASTING & EXCAVATING)
Phoenix Nickel Mine in Botswana

POSITION: Hydraulic Mechanic / Ingersoll Rand & Tamrock maintenance & repairs

DUTIES: Complete reconditiong of cylinders, pumps, final drive idlers and components. Full reconditioning of pneumatic & hydraulic drilling components. Rebuilding of down-hole hammers. Fitting of reconditioned & dyno tested CAT 3306 & 3406 and Deutz diesel engines.

PERIOD: January 1999 – March 2000 (contract) (1 year & 2 months)

EMPLOYER: BELUGA MINING (PTY) LTD Kaalfontein South Africa

POSITION: Pneumatic & Hydraulic Mechanic

DUTIES: Complete re-building of Ingersoll Rand CM350 & CM351 Crawl Air Drilling Rigs. The re-building of these rigs included: Fitting, Turning & Welding of components and the manufacture, re-design of components. Re-building and fitting of CAT, Deutz, Hatz, Detroit & Cummings Diesel engines & the air end of compressors.

PERIOD: April 1998 – December 1998 (contract) (8 months)

EMPLOYER: B & E (BLASTING & EXCAVATING)
Jet Park, Johannesburg South Africa

POSITION: Diesel Mechanic / Hydraulic & Pneumatic Fitter / Technician

DUTIES: Re-building of all Ingersoll Rand, Cardner, Denver, Tamrock Montabert & Furukawa pneumatic & hydraulic components. Re-building, Dyno testing & installation of CAT, Detroit, Hatz & Cummings engines. 50% of my working time was involved in fitting of components within Africa.

PERIOD: July 1993 – April 1998 (4 years & 9 months)

EMPLOYER: COMMUNICATION ENGINEERING LTD

POSITION: Mechanic workshop assistant

DUTIES: Re-building of Nissan & Mercedes Truck bodies and trailers

PERIOD: February – June 1993 (contract) (5 months)

EMPLOYER: KAWASAKI BENONI

POSITION: Apprentice motor cycle mechanic

DUTIES: Apprenticeship- motorcycle rebuild, repairs & racing spec dynotuning.

PERIOD: January 1992 – February 1993 (1 year & 1 months)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 985)

Go to Search Parameters...

Brief Description

I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.

Technical, Managment, communication. Skills

Enviromental Process Engineer/Technician

Document Control / Project Administrator

To use and hone my technically organize skills, knowledge and experience to Attain excellence in the industry by providing total customer satisfaction in field of mechanical Industry.

I am MSHA certified. I have experience crushing and screening. I can operate loaders, dozers, scrapers, excavators and I have my CDL.

Masters Degree in Chemical Engineering

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Computerized inventory and stock manage control to acceptable levels and inventory accuracy & conciliation. Fuel consumption tracking. Etc.

Over 8 years of electrical overseas experience on US Embassies, US Consulate, and Lockhede Martin

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Open Crane Operator and Advanced Rigger

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Mechanical Equipment Specialist with 20 years of Heavy Industrial Experience

analyst

BSc Computer Science (Mains :- Computer Science, Physics & Mathematics ),One Month Course in Fire & Safety Engineering from Bharath Petroleum Kochi Refinery,BCFE [Basic Course in Fire Engineering], Done 24 days training in Industrial Fire Fighting from Kerala Fire & Rescue Service (Kerala Fire

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

P&PCM, MBA, B.Arch

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

10 Years Working As A Cartographer For QARUN Petroleum Company

Electration Engineer Trainee

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

Professional career spans 12+ years in field of Construction,contract and project management, strategy formulation (for high spend areas), strategic sourcing and supply chain process reengineering.

Electrical Engineer

MBA, experience in Clients relations and mutual fund industry.

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

Millwright/Welder Maintenance

Plant operations supervisor / trainer, remote overseas locations

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

20 + Years Experienced Heavy Equipment Operator / Haul-Truck Driver Supervisor to Relocate Anywhere. I desire to work for a well established yet growing company.

I am a young energetic Mechanical Engineer with hands-on experience in Upstream Oil and Gas industries and Masters degree in Project Management from National University of Singapore. I came to Singapore to gain the best of knowledge of the industry and the field exposure so as to increase my profess

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems

A result oriented professional with over 15 years of cross functional experience in Sales & Marketing, Business Development, Techno-Commercial operations and handling timely Project Supplies

Electrical Engineering, Distribution Planning and Engineering, Future Planning for Electrical Load Growth, Study of 11 / 6.6 kV Network for New Projects, Modification of existing 11 / 6.6 kV network to increase reliability

Senior Site Executive Hard Rock Quarry Manager, Mine Supervisor, Operator Trainer Assessor, Multi Skilled Plant Operator

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

Field sales representative collection/ credit investigation drafting edge

Professional experience in Document Control, Project Cost Reporting, Materials Control, Logistics, Administration, NDT Supervision, NDT reporting, QA/QC etc. with Oil & Gas and Marine (Onshore & Offshore).

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Park, great Abington, Cambridge, CBI 6 AL, United Kingdom.

Design, Engineering, & Execution of Emergency Shutdown system (ESD)

Experinces in welding, mechanical and Rig at an Oil Company, CALTEX. With the latest position as Coordinator. I need a job weets wiith my experiences.

Certified Project Manager: MS Project Proficient 3 Years - Conception and Maintenance; Risks identify, log, track mitigation, etc; Issue resolution/ day to day PM

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out