Resume - I am presently working here in Saudi Aramco Oil Company as Supply Maintenance Pl...

Misco Jobs

Resume #68320

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To be part of an excellent company that adheres to standard work ethics, moral and spiritual conducts of an individual in challenging and rewarding position requiring extensive skills that will enhance my knowledge in the field of Mechanical.

WORK EXPERIENCES:

Maintenance Planning Support Engineer
June 20, 2007 – Present
Arabian Fal Co. For Contracting & Trading
(Supply in Saudi Aramco Oil Company)
Ras Tanura, Kingdom of Saudi Arabia

► JOB DESCRIPTIONS:

Reporting directly to the Saudi Aramco Oil Company Maintenance Planning
Engineer at Terminal Maintenance Services Division (TMSD) responsible to
Assists such as the following works of On-shore, Off-shore and Piers.

◊ Conducted field survey as per Saudi Aramco test and inspection worksheet
For normal, minor, emergency and preventive maintenance.
◊ Preparing lists of materials / Materials take-off.
◊ Preparing bill of quantities with back-up calculations.
◊ Proposed modification of pipe line, pipe supports and structural
Corresponding to Saudi Aramco standards.
◊ preparing detailed scope of work
◊ Coordinate contractors regarding projects.

Engine Room Operator
March 13, 2006 – June 15, 2007
East Asia Diesel Power Corporation
PFDA Bldg. Ground Floor, Fish Port Complex
Navotas, Metro Manila

► JOB DESCRIPTIONS:

I Primary Purposes of the Position

- Reporting directly to the Shift Superintendent, responsible for operations in the engine room namely; starting, stopping of all DG units according to the standard operating procedures, inspection and monitoring of the conditions and daily performance of the whole plant and all its equipment under operation or in shutdown through control panels, and monitoring devices. It has direct control over engine parameters according to work instructions from the shift superintendent in order to ensure efficient, reliable, cost effective and safe power plant operations.

II Duties and Responsibilities:

A. Plant operations i. In accordance with Control Room Operator, prepares the plant for start-up in the Engine Room.
ii. In coordination with Control Room Operator, starts, shutdown and monitoring the operations of the following plant equipment as per procedures and work instructions:
* Diesel Generators ( Wartsila Engine 12V & 18V )
* Heavy Fuel Oil Separators ( Alfa Laval )
* Lube Oil Separators ( Alfa Laval )
* Booster Modules
* Air Compressors ( Reciprocating )
* Air dryer
* Black start Generators
* Boilers
* Pumps ( Centrifugal, Screw, Submersible )
* Plant as a whole
* Other plant equipment iii. Performs the following activities as per schedule:
* engine performance test
* Turbocharger compressor washing
* Turbocharger Turbine washing
* sooth blowing and blow down of EGB's
* Replacement of filters iv. Conducts the following activities as per work order
* make up of fuel tanks
* dewatering of fuel / oil tanks
* pumping/ disposal of waste oil
* Lube oil make-up, draining and circulation
* Air run of engines

B. Control of Costumer Supplied Products i. Take fuel tanks level and other operations data at cut-off time daily and prepares daily plant performance reports.
ii. Do lube oil make up and on engines as per required every week and every month prior for weekly and monthly performance monitoring.

C. Control of Non-Conforming Products i. Pumps bunker sludge or waste lube oils into the buyer's vessel as per procedure during waste oil disposal ii. Informs the Fuel Tender of the completion of the sludge or waste oil pumping.

D. Fuel Oil Transfer i. Conducts fuel oil transfer as per procedures.

E. Safety, Environment and Housekeeping i. Ensures cleanliness and orderliness in work area before, during and after work.
ii. Compliance to safety, environment and housekeeping policies and procedures.
F. Performs other duties that may be assigned from time to time.

Production Engineer (Mechanical)
February 28, 2005 - March 09, 2006
NKC Manufacturing Phil's. Corp.
MEPZA II Basak Lapu-Lapu City

► JOB DESCRIPTIONS:

◊ Operation and Maintenance in-charge Reverse Osmosis System (6000 gpd)
(Facility Equipment)
◊ Operation in charge Neutralization of Waste water Treatment
(Facility Equipment)
◊ Counter measure Production Problems.
◊ Checking and revision of working procedures.
◊ preparing detailed scope of work

Reverse Osmosis Water Service Team Leader
October 01, 2004 – February 25, 2005
Solerex Water Technologies Inc.
Cebu Branch

Reverse Osmosis Water Service Cadet
September 08, 2003- September 30, 2004
Solerex Water Technologies Inc.
Cebu Branch

► JOB DESCRIPTIONS:

◊ Installation of Reverse Osmosis System (3000 – 6000 GPD)
◊ Conduct preventive and corrective maintenance.
◊ Planning and scheduling preventive & corrective maintenance for the
Franchise and Non-Franchise clients.
◊ preparing piping lay out for new clients.

Reliever Operator Technician - Desalination System (300 M3 / DAY)
May, 2004 – February, 2005
Plantation Bay Resort & Spa.
Solerex Water Technologies Inc.

► JOB DESCRIPTIONS:

◊ Responsible for starting and stopping of the system according to its
Standard operating procedures.
◊ Inspection and monitoring of the conditions and daily performance.
◊ Conduct preventive and corrective maintenance.

PERSONAL DATA:

Date of Birth: July 09, 1980

Civil Status: Married

Educational: BS in Mechanical Engineering
Background University of Bohol, Tagbilaran City
1997 – 2002

Computer Skills: MS Word, Excel, AutoCAD

Seminars and: Saudi Aramco Work Permit Certification
Trainings Certificate No. 42,770
August 19, 2007, Saudi Aramco Training Center, Rastanura, KSA

: Building High Performance Team Workshop
September 13-14, 2006
Jonel's Resort, Calamba, Laguna

: Lock Out and Tag Out
July 27 & 28, 2006
EADPC – DMPC Conference Room

: Basic Power Technician Operations & Maintenance Course
July 17 – 21 & 24, 2006
EADPC – DMPC Conference Room
Navotas, Metro Manila

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 994)

Go to Search Parameters...

Brief Description

Welding and electrical and management and mining class 32 hour certified fork lift operator

Electronics and Telecommunication professional with exactly 12 years of rich experience in the domain of Technical Support, Operations and Maintenance, Training and Development, Relationship Management with reputed organizations.

9+ years of experience in Civil/Structural and Mining fields in Canada, Mauritius and UK.

Natural gas pipeline design, testing, supervision, route survey, standards , ASME, ANSI, ASTM, API, AGA, AWWA, AWS, Compliances Health, safety, environmental , SCADA, air, water quality, pressure regulation, metering, filteration, odorization monitioring, inspection, deatail reporting.

Sir, iam finished bacholor degree and i have computer skill. I have worked in Singapore for 2 years(Aug 2005- Aug 2007) as Fork Lift Operator in "CROWN BEVERAGE CANS PVT. LTD." SINGAPORE . If there is any opportunity in Fork lift operator please send me mail

To secure a position in Environmental Health and Safety (EHS) Compliance with an established organization utilizing my 20 years of EHS skills, knowledge and experience.

20+ years of experience with the environmental aspects of major energy projects - power plants, pipelines, transmission lines, refineries.

I have over 27 years in mechanical repairs

Operations Supervisor - Overseas experience

Environmental Consutlant/ Management - International Experience

Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.

Senior Instrumentation Specialist / Designer

Supervision construction commissioning startup air separation ,heavy oil etc.

I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.

Operator - Track hoe, Horizontal Directional Drill 1.2 million lbs. -- Experienced in oil pipe line construction and safety - Knowledge of gasoline and diesel engine maintenance - Locating Equipment experienced and qualified

Geologist

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

Operations, I&C, Electrical, Startup, Commissioning Experience. 11 years of progressive technical and supervisory roles in Oil/Gass and Power Plants. Includes Gas Turbine, Comined Cycle, and Pipeline Operations.

Rigger with RGIT 20+ years experience

Instrumentation supervisor - QP refinaries, Qatar

QUALIFICATIONS/LICENSES: Full Drivers License, Class 2 Truck License, 'Site Safe' endorsement, 'Wheels, Tracks & Rollers' Drivers License & Endorsement (Unit Standards 16701, 16702, 16703). Skills Summary: Digger Operator, Bobcat Operator, Roller, Truck Driver (4 wheeler), Concrete Laying,

Miner/trainer/shift boss assessor

To obtain a position offering challenging responsibilities in a reputed organization requiring unwavering commitment towards profession and resultantly to become an integral part of the organization.

I am presently working here in Saudi Aramco Oil Company as Supply Maintenance Planning Support Engineer. Since I started to work for my profession, I'm exposed more on Operation and Maintenance ( Reverse Osmosis , Desalination, Power Plant, Manufacturing & Petrochemical).

Can work with computers, good communication skills, team player, can work under pressure

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Nace certified coating inspector level 3, Chartek approved fireproofing inspector & full qualified insualtion inspector.

Fitter Including Machining and Diesel Fitting

A globally-certified procurement professional with extensive Asia-Pacific experience

Iam a Mechanical Design Engineer with experience in Heavy steel structures, Pressure Vessels ( Several Types), Power Generation, Material Handling. I have quite a number of projects to my name that have been completed succesfully

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

Graduate Civil Engineer (Jan. 2001) from University of Engg. & Tech. Lahore Pakistan.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

Quality Assurance in Oil and Gas industry

SAP XI and Oracle skills and certification

With over eight years of project management experience on seismic petroleum exploration surveys and submarine cable installations. Proven ability to work independently, to work closely with the client on site, and to supervise operations in diverse and difficult working environments

An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi

Mechanic / Heavy Equipment Oppr. / Floorhand /

I have been employed in Engineering, Procurement & Construction under Saudi Aramco Projects, I engaged in various fields of Engineering, Project Design, Maintenance, and Commissioning Operation. My knowledge consist of Field Inspection, Expediting, Pre-Commissioning, Material Coordination, Material

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

25+ years Procurement, Material Control and Logistics Experience / Public and Private Corporations

To obtain a challenging position that will allow me to gain knowledge and experience in the area of Computer Aided Drafting (CAD), Microstation and PDS in Technical Department. To work and grow along with an employer to mutually obtain our objectives.

Logistic Job Skills: Stock Turn-in/Turn-out, Stores Indent/Requisition, Stores Data Entry, Physical Inventory Management, Stock Replenishment, Management Reports, etc.

Project Engineer, 5years experiance in Technip working on EPC jobs in LNG sector, excellent managerial , engineering skills.

Welding Engineer

Engineering, Millwright, Supervisor, Forman, Multi Skill, Manager, Diesel Mech, Artisan, Fitter, Electrician

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out