Resume - Working in industries that include agricultural, aquacultural, construction, oil...

Misco Jobs

Resume #68551

CONTACT INFORMATION:
View contact information...

Objective: To further my growth within an organization that will allow me to utilize my knowledge and experience as a manager or supervisor.

Skills Summary: Process/Technical manager with experience in site development. Skilled in securing engineering firms and contractors for work related to project optimization. I have background knowledge in facility design, construction, scheduling and budgeting. I have experience in developing and implementing high quality standards through best practices and lean manufacturing. I have an excellent safety record during all phases of construction, start-up/ramp-up and optimizing of finished products. Specifically designed control plans that are consistent with layout of equipment that support the finished product outlined in the original scope of project. Extensive hands-on experience with mechanical components designed for the agricultural, oilfield and wood industries.

Employment: Process/Technical Manager October to Present
Canfor PolarBoard
Fort Nelson, B.C.

Managed all quality/process requirements surrounding the structural design guidelines associated with PS-2, 2004 Oriented Strand Board production. (All sheathing and flooring products)

Team member for site selection and layout, defined design criteria, completed initial planning and cost estimates and securing of funds needed for resin optimization project.

Through a team effort co-ordinated assistance from vendors which supplied the precise materials needed for production of Oriented Strand Board.

Continually interfaced with production, electrical and mechanical departments ensuring the safe and efficient running of all components needed for the highest on-grade percentage of products manufactured to the precise design values ensuring customer satisfaction was achieved.

Leader of team responsible for the reduction of resin consumption by 17% through lean manufacturing practices while maintaining panel properties.

Introduced the reduction of density for our product line which increased wood recovery percentage and lowered the overall cost of finished product without an abnormally influencing the quality of our product.

Initiated cost reduction measures for all shipments by rail through optimizing packaging size for all products.

Developed the transition phase needed to convert our quality testing proceed from a Certified Inspector level to Real Time Quality Assurance level thus reducing our cost for certification dues.

Technical Manager/Quality Team Leader Oct. 2003 to April 2006
Huber Engineered Woods
Broken Bow, OK.

Assisted with construction, start-up, ramp-up and optimization of new Oriented Strand Board facility in Broken Bow, Ok. (continuous press)

Instrumental in establishing product design values for 20+ different products specifically for residential and industrial end uses with third party testing agencies.

Managed all trials targeting new and diversified products with different types of resins and wood mixes.

Trained all quality team members on the safe and efficient use of testing equipment.

Millwright/Boilermaker January 2002 to Oct. 2003
Koch Plant Specialty Services
Houston, TX.

Worked in modifying and refurbishing of vessel internal hardware ensuring correct flow of liquids.

Ensured the safety of individuals performing the work installing the new hardware designed for optimizing distillation processes.

Assisted with the co-ordination of hardware layout for proper installation.

Technical/Production Supervisor August 1992 to Oct. 2002
Martco Partnership-OSB Division
Lemoyne, La.

Responsible for consistent wood flow from the green-end providing endless supply of dry material needed for the continued production of finished OSB product.

Assisted and directed trials with resin/wax vendors for cost reduction and quality optimization.

Modified and established safe work practices for many components that handle huge quantities of logs and strands.

Responsible for all quality control testing of products on a daily, weekly and quarterly basis ensuring our products met or exceeded the values needed to remain in good standing with our third party testing agency.

Developed delivery schedules for all raw materials needed for optimal panel production.

Service Engineer May 1989 to August 1992
Royal Service and Rental
Oilfield Industry
Broussard, La.

Responsible for making precise cuts on pipe casing for wellhead installation.

Under high pressure, used water and nitrogen testing valves and blow-out preventers critical to the oilfield industry using safe practices.

Assisted with underwater sonar and video equipment used in various aspects of the oilfield industry.

Experience in welding and fabrication of equipment used in the oilfield industry.

Self-Employed January 1979 to April 1989
Agriculture / Aquaculture Industry
Plaucheville, La.

Managed and maintained high cost assets associated with grain production which included soybeans, corn, wheat, maze and cotton on a 2000 acre operation.

Responsible for planning and implementing time schedules for all employees, planting of crops, rotation of crops, harvesting, marketing and maintenance of equipment.

Maintained areas needed for production, harvesting and marketing of crayfish. (Aquaculture)
Education: B.S. Agribusiness
University of Louisiana
Lafayette, La.

Completed Short Courses at Virginia Tech, Virginia
"Practical Approach to Understanding Wood"
"Wood Adhesion Problem Solving"

Certifications through APA and Teco with respect to testing protocol

Interest: Baseball, fishing, camping, carpentry, golf, community

References: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1004)

Go to Search Parameters...

Brief Description

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! EXPERIENCED HIGHLY COMPETENT HSE PROFESSIONAL

Free! I have 28 years of production and reorganizing operations to maximize their production and maintenance.

Free! Working on projects for various E&P Companies and Contractors

Free! 15+ years experience HSE oilfield operations. Experience includes seismic, drilling, completions, construction with extensive exposure to heli-portable. Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Free! Good communication skills, Able to work with no supervision. Self Motivated,team leader. Extensive organising,work prioritisation and related Skills. Proficient using Maximo and Federal Supply System. Knowledgable with Excel,Microsoft Access,Windows Xp

Loader Operator/Truck Driver

Catering Operation Manager, French, fluent in English, Spanish, indonesian and Malay, seek position anywhere. Ready to move anytime

Project Manager: Responsible of the coordination and execution of the following projects: • Warehouse Management System (Oracle WMS) • Overall Revision to the actual ACP Master Catalog . Inventory Re-engineering Program

Instrument Quality Control Inspector / Quality Control Engineer, Field Instrument Engineer & Field Instrument Supervisor

I have worked many years in the construction field and I have knowledge of all aspects from ground breaking to completion.

For my fifteen years experienced in construction, as a site/ project engineer, I have more on experience in horizontal project like earthmoving works, site and land development works and road works. Some of my experienced are attached on my resume for your guidance and evaluation.

Senior material controller with great experience in western companies.Have a technical education and professional expertise in various computer softeware and hardware.Known as a good communication person with leadership skill.

As an Architect Inspector and Sr.QA/QC Engineer my primary responsibility is to control the quality of construction, so that I can best serve the project by preventing mistakes before they happen rather than finding them after the fact. And I am responsible to ensure that the quality control of the

Cement Production Supervisor // Senior Cement Process Engineer //

Surface Sciences, Polymer Chemistry and Physics, UHV Techniques, Materials Sciences, Thin Film, Single Crystal.

Results orientated, hands on multitasked, multifunctional, dedicated manager. experienced in materials. Systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.

Manager. Supervised and coordinated the activities of production and operating workers, such as inspectors, precision workers, machine setters and operators, assemblers, fabricators, and plant and system operators

• Perspective gained through advancement from field operations, through front-line supervision to senior staff management and administrative positions.

Civil Engineer specialist to cast_in_place bored piles and Marine Piled Jetties, Block Concrete Quays

Safety Management Position

Operate a machine on a assembly line, especially operate a automatic welding machine.

I believe that my vast experiences in the various facets of construction organization entitle me as the suitable candidate for this position. My academic qualification, exposures and experience have given me an in depth working knowledge in overall functions of the Construction Project Management.

Crane Operator with 14 years experience in Off-shore Operation, Drilling and Construction, and 6 years experience in On-shore Construction Oil Industry.

Remote Site Expert : Global Experience.

Extensive experience covering contract logistics, import/export, warehousing, general transport/heavy haulage, distribution, freight forwarding and customs & shipping activities at all levels of management within the mining industry.

15 + Yrs Exp. In Secretarial, Accounts, Computer, Admin, Purchase & Stores. Etc

Project engineering which involves inspection of instruments like control valves, on off valves, valve actuators, various type of analyzers etc.

I would like to apply for a senior /executive position of highway /infrastructure projects

Extensive experience in the construction industry in the field of architectural and civil/structural works of residenses, townhouses, condominiums and commercial buildings including interior and exterior finishing details. A highly motivated project supervisor, proven ability to solve site problems.

Looking for growth

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Have experience running track excavators, dozer, roller, grader, backhoe, skiddsteer, haul trucks, semi truck, many more and class a cdl, run family company in construction and excavation for over 10 years

as per attached

IO havew worked in the Cable and Telecommunications field for thirteen years in operations. I have managed Health and Safety, Plant Damage, Contract Vendors and our Inhouse construction departments through the thirteen years.

June 2003 ©¦EPresent Company: JGC Corp Location: China Position : Schedule Controller May 2002 ¨C March 2003 Company: FAFCO Location: Saudi Arabia Position : Planning & Scheduling Engineer

35 continuous years of national and international commercial construction experience

Experienced in power plant operations and startup.

Supply Chain Management, Cost Reduction, Global Product Management, Inventory Planning, Process Development, Cost Management, Vendor Management and Relationships

Geodesist/Land Surveyor/Geomatics/GIS consultant

Power Generation- Twenty-eight years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems as Lead Mechanical, Lead I&C, Lead Operations and Startup Plant Manager.

Driving, welding, logistical Skills

Hi Please consider my resume for future construction Procurement positions.

OBJECTIVE: To secure a position with a company, long term, that will allow me to use my over 24 years of experience in construction to benefit the company fully.

ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent

truck driver,heavy truck driver

Multi-talented/Multitasker - Facility / Safety Management, Hazardous materials Paramedic, trainer, Construction/General Industry background, Environmental compliance

Working in industries that include agricultural, aquacultural, construction, oil/gas exploration, production, refining and wood manufacturing my abilities, skills and qualifications are defined in my resume which only defines a small part of my true hands-on services performed at many levels.

Seasoned construction manager with over twenty years of progressive experience in commercial and industrial construction on both U.S. and worldwide projects in the following industries: Automotive, Semiconductor, Chemical, Cogeneration, Commercial Building, Food and Beverage, Institutional, Hospita

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out