Resume - I have 5 years experience in power station operation and maintenance Gas turbine...

Misco Jobs

Resume #72123

CONTACT INFORMATION:
View contact information...

Total Experience
 Working as operator at 240MW (6x40MW) GE gas turbine Shuwaik Peak power Station, constructed and maintain by HPI&SWES(U.S.A) with collaborated by Alghanim International Kuwait from May 2007 onwards. owner ministry of electricity and water
 Worked as Unit operator (T.C.R.) at 2400 MW (8 x 300 MW) steam turbines, Doha West Power & Desalination Plant, Kuwait (On contract with 3B) from June 2006 to November 2007. owner ministry of electricity and water
 Worked as Sub engineer (on contract basis) 110KV Sub Station in Kerala State Electricity Board from June 2003 to April 2006.

RESPONSIBILITIES
 At 240MW(6x40mw) Shuwaik Peak power Station
This 240 mw project contains 6 machines each having capacity of 40 mw LM 6000 G.E (PC and PD) in DCS operation. Our control system is basically MICRONET provided by HPI. The machines having two drives in which the H P turbine (two stages) drives H P compressor and L P turbine (14 stages) drives the LP compressor and the load, which is connected through a gear system. The HP and LP speeds are 10500 and 3600 respectively. Our machines equipped with water wash system (on load and off load) Sprint system and water injection system.Auxillary skid (starting motor, jacking oil pumps) used to lift and rotate the HP drive at a speed of 2400 rpm.
My area of responsibilities includes ensuring the normal operation of the plant, monitoring of operational parameters and during abnormalities trouble shooting and necessary action, to conduct weekly test, change over of equipments according to running hours, commissioning activities after shutdown, after all monitoring of auxiliary and utility parameters including instruments air system cooling water system, service and make up water system, safety and quality parameters
Our system also includes chilled water system, cooling water system, gas fuel system, waste water system, lube oil system, demin water system, make up water system and fire fighting system.
 At 2400 MW(8 x 300) Doha West Power & Desalination Plant
This 2400 mw mega project is one of the basic load plant and meeting 25% of power requirement of country. It is also feeding power/ steam to 110 million imperial gallons Doha West Desalination Plant, which meets 60% of water requirement of the country.
The steam turbines made by M/s Mitsubishi, Japan is a tandem compound double exhaust, extraction, condensing type working on reheat/ regenerative cycle. There are 8 turbo generator units each having a capacity of 300 MW. Single drum, water tube, natural circulation, reheat type boilers are made by M/s Deautsche Babcock, West Germany are of open air installations capable of generating 1100t/h of steam at 140 bar and 540ºc. Heavy fuel oil, crude oil, gas oil and natural gas are using as fuel for firing. My area of responsibilities includes ensuring the normal operation of the plant, monitoring of operational parameters and during abnormalities trouble shooting and necessary action, to conduct weekly test, change over of equipments according to running hours, commissioning activities after shutdown, after all monitoring of auxiliary and utility parameters including instruments air system cooling water system, service and make up water system, station tracing steam, safety and quality parameters, fuel oil and gas receipt etc.

 Kerala State Electricity Board (110 kv sub station, pazhayannur )

My area of responsibilities includes ensuring the normal operation and maintenance of the station, monitoring of operational parameters and during abnormalities trouble shooting and necessary action, change over of equipments according to running hours, shut down, after all monitoring of auxiliary and utility parameters, maintenance in HV&LV motors, Switchgears, Transformers, protective relays, Battery system, Air compressors, Current Transformer (C.T) &Potential Transformer, EHT,HT and LT equipments etc.

EDUCATIONAL QUALIFICATIONS
Academic I Technical
Qualifications I Institution/ University Year of completion %of marks
Diploma in Electrical
Engineering (3 YEAR)Board of Technical Education,
Kerala 2003 63.5

T.H.S.L.C Department of Technical
Educations, TRIV ANDRUM
Kerala. 2000 69

TECHNICAL TRAINING
 Balance of Plant Systems Basic Operator's Course LM6000PC&PD (course conducted by S&W Energy Solutions, Inc,U.S.A),Kuwait
 Basic operator course (course conducted by GE Energy),Kuwait
Heart saver first aid Course (course conducted by American Heart Association)
Valid up to 18.03.2010

ADDITIONAL QUALIFICATIONS TIONS
 Computer knowledge in Windows 98, 2000, XP & Office applications
 AutoCAD 2D & 3D

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 985)

Go to Search Parameters...

Brief Description

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

Fire Prevention, Job Safety Analysis, Hazard Analysis, TOR,

CAT parts logistics supervisor with five years experience in supply chain management and 8 years experience in Multinational organizations. I hold a bachelor degree in Commerce, political science, commercial representation certificate from the ministry of foreign trade & a certified Java programmer.

I have 5 years experience in power station operation and maintenance Gas turbine(GE LM 6000 PC&PD),steam turbine(Mistubishi 300MW)

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

My skills include operation of a voriaty of heavy equipment in the areas of enviromental, paving, dirt and utility work

Specialist in Security, Safety and Risk management

Entry Level Electrical/Instrumentation Engineer. Senior Field Engineer LWD/MWD with Schlumberger in different countries. Strong prepartion for projects and Jobs will lead to over expected results.

HSE ENGINEER

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

Im a highly qualified Gas turbine operator/ I have worked on Construction/Commissioning/Operation Of Alstom GT13E2, TM 2500,GE Frame 9,6, and Solar Gas Turbines

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

A highly motivated and resourceful Engineer / Supervisor with experience in the Oil Industry with international companies in the construction, and upstream maintenance and operations.

College Degree, Supply Process Development & Continuous Improvement, Sourcing & Procurement Strategies, Bid & Proposal Evaluation, Negotiations, Supplier Selection, Contracts, Equipment/ Materials/ Components & Services, Cost Reductions, Training, Presentation of Results.

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

Expertise in handling instrumentation systems like Inlet Gas Metering Systems, ABB & DANIEL Gas Chromatographs, Analyser Management and Data Acquisition Systems, Process Gas Analysers, Process Monitoring Field Instruments and Custody Transfer Equipment. with proven abilities in reducing downtime.

I am Vaka Vasavi, at the verge of finishing my Masters in GIS at UT Dallas. Currently working on my Master Project which will conclude my course work at UTD, at the same time I am looking for an internship/Fulltime position in a organization which would benefit from my GIS knowledge, skills and

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

Geotechnical Engineer specializing in rock/soil engineering and numerical modelling, based in Vancouver, Canada. Looking for a challenging career opportunity worldwide in natural resources sector, civil/mining geotech consulting or academia.

Career in logistics management during the past ten years. Operational background from the ground up with cargo airline, third party logistics provider, freight forwarding, marine and air cargo charter, and oil & gas industry experience in remote locations, namely Alaska and Russia / FSU.

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

B.E (Mechanical) with 3 years of experience in automobile industry (sheet metal), good working knowledge of Pro/Engineer, Pro/intralink and exposure to Catia V5.

Project Control, Corporate Treasury, ERP Application Consultants

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

Concrete mixer driver with 8 years experience. Concrete plant operator for 1 year. End loader operator and site supervisor 4 winters. Class A-CDL drivers license with hazmat and tanker endorsement.

hnician/manager with over 15 yrs experience in train scheduling and safety. Expertise in train circulation graphing, train scheduling, and statistical analysis of safety and performance. Strong mathematical, analytical and problem-solving skills; demonstrated leadership; sharp eye for detail.

A B.S Chemistry graduate of University of the Philippines in the Visayas; research team-member on “Ecological Assessment of Iloilo River. Phase I: Identification and Quantification of Pollutants of Iloilo River” for the year 2003-2005; had OJT at the National Pesticide Analytical Laboratory, Dept.

I am a Mechanical Engineering working in a Service company. I have two Msc one of them in Oil and Gas Engineering. I consider myself as a multi skilled Engineer

I have a cumulative of 5 years field work experience and my experience varies from manufacturing/processing environment to Information Technology and Oil & Gas.

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

Experienced construction project manager with heavy background in petrochemical production operations

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Result-driven in Civil Engineer with seven (7) years technical experience in Construction of Oil and Gas, Petrochemical, Industrial Oil Petroleum Refinery, LNG trains onshore facilities and Residential/Multi-Storey Buildings Development Projects.

Graduate with Bachelor Degree in Science Surveying and Geomatics (Hons) from Universiti Teknologi Mara Shah Alam

Experienced in Procurement, Supply & Engineering Management

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

BTech Electronics and Communication Engineer having 4 years experience in Operation and maintenance of Power Substation.Also have Post Graduate Diploma in Advanced Computing.Knowledge of PLC Programming and Applications and SCADA Programming and Applications.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Professional bilingual Engineer with, mining, constuction, and maintenance experience

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out