Resume - Timed served Mechanic with safety certification and good leadership skills

Misco Jobs

Resume #77123

CONTACT INFORMATION:
View contact information...

As a former military mechanic with the Royal Electrical and Mechanical Engineers (R.E.M.E) I have a sound technical knowledge regarding the inspection, maintenance and repair of Diesel engines, B vehicles and tracked plant. Combined with the management and organisational skills that I have developed over the last 12 years both within the military and from setting up and running my own business, and also from handling small teams with a strict deadline, I bring with me both the experience of implementing health and safety on the shop floor and in arduous working environments and skill set to undertake various positions. Having gained certification in both OSHA and NEBOSH it has brought together my skill set and will allow me to progress further my health and safety portfolio. I have recently been accepted into the International Institute of Risk and Safety Management (IIRSM) also I am studying for my HNC in mechanical engineering ( correspondence course ).

Work Experience

Techno Service Nederland (T.S.N) - Current Position.

* Mechanic.
Service and general maintenance, of large vehicles. ( PSV)
Leyland DAF, Mercedes, Scania,

General Dynamics Land Systems. November 2007 – September 2008

* Battle damage repair of STRYKER variants (Middle East)
Working with a small team, rebuilding battle damaged STRYKER vehicles, within a large mechanical workshop.
Receiving vehicles with considerable combat damage, cleaning to remove any bio hazard materials, stripping the vehicle ready for hull reconstruction and a full rebuild to factory standard for resale to the US military. Due to the inherent risk involved from unexploded munitions, bio hazard and standard industrial risks, I was responsible for ensuring that a safe system of work was developed for each individual vehicle. Initially the vehicle was treated as a confined space and access restricted to only essential workers. All completed to a strict deadline to ensure immediate return to combat troops, and realising maximum profit from the task undertaken, with the minimum work week in excess of 80 hours in 30+ degrees.

TXM Recruitment- (ABRO-Sennybridge) – August 2007 – September 2007

* Service and repair of British Army equipment
Working independently within a busy workshop completing the mandatory regular servicing, repairs and major assembly replacement for the Army units. The workshop strictly enforced its health and safety policy and maintained a high standard of work at all times.

Allegis group: - April 2007 – August 2007

* Development and implementation of generator set maintenance schedule US military Germany.
Developing the maintenance schedule for an aviation unit within the U.S military and implementing it with the aim of completing the contract within 18 months, using both military and civilian workers from the local economy and overseas. The role involved tracking the equipment, building a database to incorporate both regular service intervals and complete overhauls within budget and time constraints permitted by the military, ensuring that equipment was available at extreme short notice for battle damage replacement.

Self employed (Al's ice cream) January 2005 to February 2007

* Set up and run a successful ice cream vending business.
Started Al's ice cream as a project to develop my business skills, starting with a garage full of second hand equipment I fabricated a vehicle and built up a comprehensive business plan and went on to run a profitable business on a small scale for two years.
I sold the assets for profit and wound the business up to return to a mechanical workshop environment.

Parts supply company (John Rickard Autos) January 2002 – December 2004

* Implementing service schedule- providing the company with 100% availability of delivery vehicles by providing a service schedule designed to work within a fast moving company.
* Technical advice – providing advice for customers on the options available for the service equipment and specialist tools available for a wide range of non commercial vehicles.
* Customer relations- Face to face contact with customers with regards to quality of service and deal with any issues they may have with the invoicing.

British army (Royal Electrical and Mechanical Engineers)
December 1995 – June 2001

* Stand in artificer vehicles Bosnia 1999- Ran a Light Aid Detachment for a Scimitar squadron having to maintain 100% availability on the tracked armoured vehicles for operational duties.
* Challenger MBT – service, recovery and repair of running gear and main assemblies.
* CVR (T) – Inspection, service, recovery and repair of every aspect of this tracked vehicle including the ability to strip and rebuild TN15 epicyclic gearbox. Also a member of the dieselisation team tasked with converting the J60 petrol driven vehicle to the Cummins diesel.
* L/Rover – inspection, service, recovery and repair of every aspect of the vehicle.
* 430 series of vehicles, Leyland daf, HVM Stormer and various other vehicles and equipment.
* Junior Military Certificate (JMC) junior management course in the management of people in arduous conditions, workshop environments and teaching/instructor skills.
As a junior NCO (non commissioned officer) within the R.E.M.E my role was varied and demanding ranging from maintenance within a large industrial type workshop to recovery of vehicles from mine fields in the former Yugoslavia. Also as an NCO I would be responsible for a team of men to undertake the above tasks, while maintaining high level of quality, also ensuring health and safety regulations were adhered to in the workshop environment.

Qualifications

* City and Guild motor vehicle craft
* R.E.M.E Certificate of trade proficiency
* NEBOSH IGC Certificate (to be confirmed)
* OSHA safety officer
* OSHA 30-hour General industry safety and health
* OSHA 30-hour Construction industry safety and health
* Medic first aid ( CPR )
* Medic first aid ( Blood borne pathogens )
* Basic fire warden as per NFPA standard
* Crane operators certificate of competence o Gantry o AFV 434 HIAB
o B-ford 8t CALM (ATLAS)
* Part 2 signals RAC AFV
* Junior military certificate ( military junior management and instructor/teaching skills )
* ADR-Vocational training certificate for drivers of vehicles carrying dangerous goods-
Other than in tanks class 1, 2 and 3. ( expired 27/11/2002 )
* GCSE ( Maths, Chemistry, Biology, Physics, English, Welsh, Art, Geography, CDT)
Relevant personal experience

* Initial planning, funding and logistics of Cape to Cape challenge, racing from Nordkapp, Norway to Cape Tariffa, Spain. (Winning team)
* PADI Advanced open water diver
* Integral part of extensive over landing expedition to Southern Africa. ( Kenya, Tanzania, Zambia, Botswana and South Africa ) Initial vehicle procurement, full expedition service and maintenance and local parts purchasing within budget limitations.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1132)

Go to Search Parameters...

Brief Description

A highly motivated and resourceful Engineer / Supervisor with experience in the Oil Industry with international companies in the construction, and upstream maintenance and operations.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

10-years of experience, highly dependable, punctual and efficient, strong background in customer services and support, excellent organizational, planning, interpersonal and communication skills as well as filing, receptionist and other related tasks

Safety Health & Environmental advisor, HSE advisor, consultant, russian turkish speaker

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

OSHA, Honesty, Windows, Ability to work with others, MSDS, Multi-tasking, Word, Detail Oriented, Forklift, Patience, Excel, High work standards & ethics, Safety Awareness, Leadership, Access, Results Oriented

I am a Bilingual/Bi-Cultural person. I have a lot of iternational business experience as a global businessman. I can be a good bridge between U.S. and Japan.

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Quality dozer/blade/excavator operator in all aspects of construction

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

Catering Management

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

Project Control, Corporate Treasury, ERP Application Consultants

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

QA/QC Inspector cum Engineer

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Graduate in chemical and electrochemical engineering one of the unique course offered by central electrochemical research institute in elecrochemical science , having professional expertise in various electrochemical area with CGP of 7.934 looking for a challenging career in reputed organisation .

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Very good analytical and project management skill. Do multi tasking and road warrior.

BTech Electronics and Communication Engineer having 4 years experience in Operation and maintenance of Power Substation.Also have Post Graduate Diploma in Advanced Computing.Knowledge of PLC Programming and Applications and SCADA Programming and Applications.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Instrument Engineer Mark V, Mark VIe, Siemens S7, Bently Nevada , CCC,CompeX.

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Supervision, planning, scheduling, coordination, operation & maintenance (proactive & reactive), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities, Auto CAD, ISO 9001

Prepare MTO, BOM, electrical installation, electrical testing, E & I pre commisioning and commisioning

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Heavy Eqiupment Operator,Construction,

A comprehensive billing system for about 62 hired Heavy machinery's was successfully implemented.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

B2B Marketing, Product Development, Dealer Management, Market Research

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out