Resume - Heavy Eqiupment Operator,Construction,

Misco Jobs

Resume #77259

CONTACT INFORMATION:
View contact information...

I am compiling this resume in order to enable my perspective employer to fully understand the range and scope of my skills and experience. As well as to show my use of and skills with a variety of complex, complicated and possibly dangerous tools safely, Also to exhibit my ability to supervise as many as (7) skilled craftsman while performing my own tasks.

RELATED EXPERIENCES:
From 05/08 to 11/08:
I worked for A and B Marketing: 6500 Bowden Rd. Jacksonville FL. 32254 Ph.904-268-0033. I worked as a Lead Generator for this Rainsoft Distributor under Shirley Murphy. I also for a short few weeks sold Rainsoft water conditioning systems. I found that I was not suited for this line of work.

From: 04/06 to Present:

As a self-employed remodeler I provided my clients with most aspects of the field:
Plaster/ Sheetrock: Install, repair and as well as prime and paint.
Flooring: Repair and restore Hardwood floors; Prepare surfaces and install ceramic, porcelain and stone tile.
Plumbing: Replace copper and galvanized pipe with PVC and CPVC. Change out, repair, and replace and install kitchen and bath fixtures, sinks, toilets, bathtubs, and showers.
Basic Electrical: Run wire from a junction box down the wall to a switch, then back up to a new ceiling fixture. Replace switches, outlets and anchored and installed ceiling fans.
Transform a (2) car garage into a studio office with a shower bathroom, including pouring a concrete floor with a crew, supervising Electricians and Plumbers while managing a crew of (3). At one point I was overseeing the removal of the electrical panel from the house to an outside wall, while 220 service was being run under ground, to accommodate a tankless water heater, and a crew of plumbers were repairing and connecting the sewage pipes from the house and studio to city service. And getting the sheetrock mudded, the carriage doors installed on the face of the garage, and the Lord knows what else!

From: 03/03 to04/06
Under Nick Humphress of Neighborhood Nick @ 2759 Green St. Jacksonville Fl. Ph# 374-9505 or 509-6121 (cell) I performed all aspects of home repair and remodeling, including trim carpentry I also acted as On-site manager for up to (3) craftsman.

OTHER EXPERIENCES;

From 05/00 to 03/03:
Florida Rock Ind. Inc. 700 Palmetto Dr. Jacksonville. Fl.32236
Plant Manager: George Newman ph# 545-2643 (home)
I operated a concrete mixer truck at all hours of the day and night on residential and commercial pours.

From 01/00 to 05/00:
Various jobs; Burger King (cook) and Amelia Island Plantation (housekeeper)

From 08/99 to 01/00:
Personnel Department Inc. 1234 Williston Rd. S. Burlington Vt. Ph# 802-865-4243
Temporary labor: stocking shelves for Office Depot and Bon Ton.

From 06/98 to08/99:
Professional Nursing Services: Pace Office Building, Suite 100B. S. Winooski Ave. Winooski Vt. Ph#802-655-7111
Title: Traumatic Brain Injury Certified, Licensed Nurses Assistant.
Supervisor: Fran Greenhalgh RN. AS. TBI.
I assisted TBI. Clients in redeveloping life skills with the goal of enabling them to return to self sufficiency.

From 01/91 to 06/98:
Green Mountain Nursing Home, 1102 Ethan Allen Ave. Colchester Vt. 05446 Ph# 802-655-1025
Title: Licensed Nurses Assistant
Supervisor: Betty Rhoades RN. DNS.
All areas of Long term care on (3) shifts.

REFERENCES:
Professional: Roger A. Moss, Pacific Bridge Realty. 2755 Riverwood Ln. Jacksonville Fl. 32207 Ph#904-887-4166. Olin Cannon, Cannon Plumbing Inc. 217 Trout River Dr. Jacksonville Fl. Ph#904-343-4344.
E. Shane Whitemore, Property Manager CSX Transportation. Ph# 904-556-4426.

Personal: Tina Anderson, (Mentor) Ph# 904-389-5125. Chris and Lori Terpak-Smith (Friends) Ph# 904-389-4669.

Equipment Operated:
Farm Tractors: Massey Furgeson, International Harvester, Allis Chalmers, Belarus.
Other Farm Equipment: Grain Mixers, Hay Mowers, Rakers, Tedders, Balers, Harvest Wagons and Manure Spreader, also Silo Feeders and Fillers, as well as Milking Machinery.
Other Equipment: Front-/end Loaders,Scrapers/Pans, Vibratory compactors, Forklift, and Bob Cats.

Tools Used:
Proficiently: Chain, Circular, Jig, Reciprocating, Miter, and Wet/Tile Saws, Drills, Grinders, Sanders, including Drum and Orbital floor Sanders, Buffers, Trim Nailers, Ladders, and Scaffolding.
Familiar With: Table saws, Routers, Jackhammers, Floor Jacks and Paint Sprayers.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1132)

Go to Search Parameters...

Brief Description

A highly motivated and resourceful Engineer / Supervisor with experience in the Oil Industry with international companies in the construction, and upstream maintenance and operations.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

10-years of experience, highly dependable, punctual and efficient, strong background in customer services and support, excellent organizational, planning, interpersonal and communication skills as well as filing, receptionist and other related tasks

Safety Health & Environmental advisor, HSE advisor, consultant, russian turkish speaker

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

OSHA, Honesty, Windows, Ability to work with others, MSDS, Multi-tasking, Word, Detail Oriented, Forklift, Patience, Excel, High work standards & ethics, Safety Awareness, Leadership, Access, Results Oriented

I am a Bilingual/Bi-Cultural person. I have a lot of iternational business experience as a global businessman. I can be a good bridge between U.S. and Japan.

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Quality dozer/blade/excavator operator in all aspects of construction

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

Catering Management

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

Project Control, Corporate Treasury, ERP Application Consultants

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

QA/QC Inspector cum Engineer

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

I am a target oriented, highly motivated, hard working and communicative person, I have Leadership skill, I am speak English. In addition to the above qualification, I am also familiar with computer program and have the ability to work in team. I have an Experience In belt system maintenance and equ

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

A qualified Deep Sea Captain (Master Mariner) with 15+ years Offshore: - Jack-Up platform (as Barge Master, Rig Mover ) - DynamicPositioning (DP2 Dive/ROV) - Heavy-Lift Constrcution/Offshore Installation/Platform removal/Pile Driving - SEMISUBMERSIBLE Units (as Barge Master)

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Graduate in chemical and electrochemical engineering one of the unique course offered by central electrochemical research institute in elecrochemical science , having professional expertise in various electrochemical area with CGP of 7.934 looking for a challenging career in reputed organisation .

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Very good analytical and project management skill. Do multi tasking and road warrior.

BTech Electronics and Communication Engineer having 4 years experience in Operation and maintenance of Power Substation.Also have Post Graduate Diploma in Advanced Computing.Knowledge of PLC Programming and Applications and SCADA Programming and Applications.

Professional mechanical and project engineer, conduting the maintenance and projects within heavy industrial environment blingual, planning, ‎budget control, Reliability, RCM, PdM, PM‎

Instrument Engineer Mark V, Mark VIe, Siemens S7, Bently Nevada , CCC,CompeX.

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Supervision, planning, scheduling, coordination, operation & maintenance (proactive & reactive), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities, Auto CAD, ISO 9001

Prepare MTO, BOM, electrical installation, electrical testing, E & I pre commisioning and commisioning

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Heavy Eqiupment Operator,Construction,

A comprehensive billing system for about 62 hired Heavy machinery's was successfully implemented.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

B2B Marketing, Product Development, Dealer Management, Market Research

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out