Resume - I have been working as a Marine Piping Designer for 8 consecutive years.I can ma...

Misco Jobs

Resume #78321

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To find a job wherein I can enhance my skills,be more efficient and productive that I can have advancement in my engineering career and then my social life.

JOB EXPERIENCE:

COMPANY:
Sembawang Shipyard Pte. Ltd.
Admiralty Road, Sembawang
Singapore

POSITION:
Piping Designer
Engineering & Design Office
December 11, 2006 - Present

JOB DESCRIPTION:

-Provide piping arrangement detail drawing of various piping system in the
Engine Room and Hull part of the ship.
-Make schematic piping diagram (P&ID) base from owner's technical specification, Class Rule and SOLAS.
-Make outfitting drawings for auxiliary machinery foundation seat.
-Make equipment lay-out.
-Make piping isometric and as-built drawings.
-Make material take-off summary list.
-I been working with projects that involves piping arrangement, both new build and conversion of Drill Ship, Oil Tanker, FPSO, Pipe Lay vessel and Rock Dumper vessel.
-In our recent project I been doing P&ID drawing of tank vent system, deck scupper system, sludge and dirty oil drain system, fuel oil vent and overflow system, lubricating oil and bilge system.
-Make piping arrangement 3D model using ship design by Tribon Aveva.

Tsuneishi Technical Services Philippines, Incorporated
Buanoy, Blamaban City
Cebu, Philippines

POSITION:
Piping Design Engineer II
Machinery Piping – Machinery Outfitting Group
& Hull Piping
May 7, 2000 – December 4, 2006

JOB DESCRIPTION:

-Plan and lay-out piping arrangement drawing in the engine room.
-Prepares 3D model arrangement of piping system and equipment.
-Prepares detail drawing of machinery seats and detail drawing of pipe support for fabrication.
-Preparation of detailed pipe piece output for fabrication.
-Design staff, in-charge person per assigned vessel, coordinates with hull design and electrical design staff of new design requirement. Check all incoming data and maker's drawing. Checking of piping arrangement drawings.
-In Tsuneishi I did a lot of piping arrangement in Engine Casing, around Boiler piping connection, Generator sets piping connection, Main Engine piping connections and other piping system connected to auxiliary equipment. I have also a lot of experience in doing Hull Outfit design where I do bilge system, water ballast piping arrangement, air vent, sounding pipe, fire and wash deck, scupper pipe and fuel oil tank heating system.
-Member of Sea Trial Team.

ADDITIONAL EXPERIENCE:

Technical Support Staff
Machinery Design Department – Machinery Outfitting Group
Tsuneishi Corporation
Hiroshima Prefecture, Japan
January 2005 - December 2005

TRAININGS:

Introduction to Plant Design Management System (PDMS)
ITE College Central (Tampines Campus) Singapore

Ship Design by Tribon Aveva
Engineering & Design Office
Sembawang Shipyard & Engineering

AutoCAD 2002 (3D) Application Training (Autodesk accredited)
University of San Carlos – Technological Center
Architecture Computer Center
Talamban, Cebu City, Philippines

3D-MATES (Mitsubishi Advanced Total Engineering System for ships)
Machinery Piping Arrangement– Level-up Training
Tsuneishi Corporation (formerly Tsuneishi Shipbuilding Co., Ltd.)
Hiroshima Prefecture, Japan
January 2005 - December 2005

3D-MATES (Mitsubishi Advanced Total Engineering System for ships)
3D Software Operation Update Training
Tsuneishi Corporation (formerly Tsuneishi Shipbuilding Co., Ltd.)
Hiroshima Prefecture, Japan
July 2003 - December 2003

EDUCATION:

Technological University of the Philippines - Visayas
Talisay City, Negros Occidental, Philippines
Graduated Bachelor of Science in Mechanical Engineering - March 1999

Technological University of the Philippines - Visayas
Talisay City, Negros Occidental, Philippines
Graduated Bachelor of Science in Mech'l. Engineering Technology - March 1997

Silay Institute
Silay City, Negros Occidental Philippines
Graduated High School – March 1993

Brgy.Lantad Elementary School
Silay City, Negros Occidental, Philippines
Graduated Elementary- March 1989

SEMINARS:

AutoCAD LT 2006 training Seminar
(Sponsored by Columbia Technologies Inc. authorized by AutoDesk), March 2006

Team Building Seminar
(Sponsored by Tsuneishi Technical Services), December 2000

Personality Development Training
(Sponsored by Tsuneishi Technical Services), April 1999

PERSONAL DATA:
Date of Birth: September 25, 1976
Place of Birth: Silay City, Philippines
Age: 32
Gender: Male
Civil Status: Single
Height: 165 cm.
Weight: 64 kgs.
Citizenship: Filipino
Religion: Roman Catholic
Languages Spoken and Written: English, Filipino, Basic hongo

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1132)

Go to Search Parameters...

Brief Description

Unlicensed Engineer, Diesel Mechanic

Instrumentation supervisor - QP refinaries, Qatar

QA/QC Project Execution Engineer With more than 3 yrs of experience in construction industries

16 years experience as a Safety professional and Paramedic, NREMT-P, Texas EMT-P, Colorado EMT-P, ACLS, ITLS, PEPP, CPR

Project Manager, Business Systems Analyst, and Information Developer

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

My wish would be to integrate a team of safety, contractor or in the respective specialty . My family circumstances having found stability durable. The formation that I received in this field pushes me to gain this environment in which I smell myself much more at ease. Indeed, the hostile sec

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Supply Chain and Customer Service Manager - Looking for relocation in Australia or Africa.

A globally-certified procurement professional with extensive Asia-Pacific experience

LPG/LNG Operations - Bottling & Bulk Supply & Distribution, Project Management, Primavera & MS-Projects

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

Offshore Advanced Rigger,experianced,heavy lift,200t capt,AB seaman

Construction manager, laborer, Class A CDL Drivers license, mechanic

With over eight years of project management experience on seismic petroleum exploration surveys and submarine cable installations. Proven ability to work independently, to work closely with the client on site, and to supervise operations in diverse and difficult working environments

Maufacturing Automation

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

With 8 years of extensive management & engineering experience in construction field, I seek a senior management position which will allow me to utilize my experience at higher positions.

Electronics Engineer exp. in OPTICAL FIBRE , RF, WIRELESS, PROJECTS ROLLOUT

Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager

Welding Engineer

A diligent Civil Engineer with eight (8) years of Professional commitment to hard work in diverse role varying from Site Engineer, Project Engineer, Site Manager, and Construction Project Manager. A good team player, highly mobile and willing to be part of a result driven goal oriented team.

NACE Level II Certified Coating Inspector, Certified Welding inspector

Highly motivated individual with skills in Operation of Diesel Generator set (5x20MW), for Electrical projects in Designing, Estimation and Supervision of Industrial and high rise buildings.

Remote Paramedic, Firefighter, Paramedic

Dedicated, results-oriented, professional with the ability to manage projects and meet deadlines. Strong communications, customer service, and problem-solving skills. Successful in networking with individuals on all levels. Excellent organizational, multi-tasking and time management abilities.

Competent HSE Officer and registered with Department of Occupational Safety & Health Malaysia, Lead HSE MS Auditor with NCSB. Diploma in Occupational Safety & Health.

nvq level 3 in electrical installations, 17 th edition wiring regs, hv terminationsand splicing, supervisor experience

Commissioning of utilities in oil & gas plants and water treatment plants

Mechanical System Engineer

Mechanical engineer with extensive experience of over 13 years in contract administration, estimation, tendering, budgeting, cost control, billing variations, claims and arbitrations & project closing. Well-versed in procurement, installation and commissioning of electro-mechanical

Senior Document Controller. 9 years experience. Oil & Gas, pharmaceuticals, petrochemicals. Bachelor of Science in Electrical Engineering graduate. Using WebDMS. Electronic transmittals, document store, electronic issue of documents. ISO standards. Can lead Doc con group. Coordinate with Clients,

D.A.E. (Mechanical) 1970/3300 Second 1989

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

I wish to join a organization that can utilize my skills and training effectively that is commensurate with experience and qualifications and reward me accordingly. I am a well presented person and can take up new employment at short notice.

I am a Graduate in Mechanical Engineering with four years experinece in the field of Oil and Gas. Iam also a certified CWI by AWS and also got certification as Level-II in RT,UT,PT,MT.

Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate

Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering

Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab

Asst. Manager Systems with Skills like System admin, Network admin, Helpdesk Manager & MIS.

To work in a challenging and motivating environment where there are opportunities for the full and effective utilization of my skills and potentials and to showcase my God-given talents.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

Manager, Team leader, Computerized production management, International import-export, letters of credit, banking, assistant

To obtain a suitable position in pursuance of promising career where I can make use of skills and experience for the growth of the organization, in conjunction with recognition and encouragement for hard work and sincerity.

Around 20 years (around 8 years as lead) experience in all QA/QC activities up to final certification of equipment and piping including pre commissioning inspection in Oil & Gas (Production Platforms (Topsides), Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbui

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out