Resume - ECT in Electronic Engineering with 11 years experience in the Electrical Industr...

Misco Jobs

Resume #78358

CONTACT INFORMATION:
View contact information...

ECT in Electronic Engineering with 11 years experience in the Electrical Industry. Experienced and trained on LM2500, LM6000, TM2500s, GE frames T1/T3; PBX; GPS; Digital Switches; Nortel DMS 250/500 certified; Allen Bradley, Siemens, Fanuc, MarkV, MarkVI,Woodward and Bachmann PLCs; COAX cable test and termination; propane back-up generator installation; diesel generator installation; storm restoration both electric and telecom; aligning generators; continuity testing on all electronic/electric equipment; OSHA certified; Tractel trained; and climb tested. Other experience include transmission and distribution training; being First Responder Certified; heating up many different circuits simultaneously; arranging for replacement of transformers; and arranging for relay maintenance on transmission side.

PREVIOUS ASSIGNMENTS

05/08-08/09 GE Energy Rentals Constellation Recommission Salt lake City UT
Night team lead on 5 LM6000 units in a time sensitive environment as Constellation never took the machines off the peaker schedule. Required procedures that were complex with at least two different teams working on the same unit i.e. CMMS relay test and drive end generator bearing seals replaced, work done in one night and unit breaker was closed the next day. All without incident.

11/07-04/08 GE Energy Rentals Waterside Project Stamford CT SOT
Team lead for environmental team on oil spill clean up. After cleaning up approximately 500 gallons of low sulfur diesel got the site in EPA compliance and trained crew on oil spill clean up meeting the new regulations for CT environmental laws.

08/07-11/07 GE Energy Rentals Subyia Project Kuwait City, Kuwiat
Start Up and Commissioning. Provide 3 x TM2500 assembly support under the direction of GE Aero Energy at the Subiya Power Station in Kuwait. Also worked with team that reconfigured Woodward PLC so that machines ignored the 86trip on the diesel fuel allowing machines to run even when fuel was 140F which was the case daily. Now all large generators use the same configuration.

04/07-08/07 GE Energy Rentals Waterside Project Stamford, CT SOT.
Facility consists of three 22.8MW TM2500 units, Baker fuel storage tanks, a demin water trailer, fuel forwarding pumps, filters, and both local and remote control. Responsibilities included serving as lead operator on site, filling out shift logs, running data sheets, assuring demin water quality, and ordering fuel. Duties also included making sure units were ready to start when dispatched, and giving weekly site updates to the site manager.

01/06-01/07 Suzlon/RBG. Wind Turbine Project, OK. Pre-commissioner. Responsibilities included COAX cable test and termination; and installing and heating up 2.1MW plants. Duties also included aligning generators; oiling and greasing all mechanical components; and continuity testing on all electronic/electric equipment., OSHA certified, climb tested, and Tractel trained.

08/03-08/05 Rodger's/Verizon Communications. Various Projects, OH. Field Cell Technician. Responsibilities included figuring out a way to swap back-up power systems on remote sites while hot, saving time as data fill was not needed and microwave dishes were not turned off, now used by most telecom companies; re-cabling most sites; working storm restoration requiring data fill and stayed until site was up and running. Nortel Certified.

02/01-06/03 AEP, Groveport, OH. Dispatcher/Distribution/Transmision. Responsibilities included transmission and distribution training; being First Responder Certified (2003); storm restoration; heating up many different circuits simultaneously; arranging for replacement of transformers; re-arranging distribution phases to get Customers in as soon as possible; arranging for relay maintenance on transmission side; and being error free and safe. Received Presidents award for dispatching the most calls AND not a single reportable safety incident (2002).

01/00-12/00 Qwest, Dublin, OH. Responsibilities included installing T1/T3 and PBX; and performing NOC/SOC work. Was trained and Nortel 250/500 DMS certified.
01/00 DeVry Institute of Technology. Working in the lab while going to school full time. Awarded Phi Theta Kappa in 1999.
1998-1999 Interning at O'Hare International Airport.
EDUCATION

07/98-02/00 DeVry Institute of Technology, Columbus, OH.
ECT GPA 3.45
Awarded PHI THETA KAPPA in 1999
IEEE member since 2000

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1119)

Go to Search Parameters...

Brief Description

Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas

I have around 15 years experience as a machine operator on 180 360 degree machines also dozers and dumptrucks. Also as foreman with a groundworks contractor and two years as assistant plant manager with a plant rental company. I am looking for similar work at home or abroad.

Camp Boss

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu., 19 years thorough exposure in Mechanical System of Thermal P

I have 28 years experience in finance, project control, scheduling and material control working on DoD projects and private sector manufacturing companies in and out of the U.S.

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Monitoring and Scheduling the Projects

Over ten years experience in Cement Process Production and Quality Control XRF

My career as an Consultant has provided me opportunity help the client to expand revenue growth, reduce operating costs and improve overall productivity. I also learned the importance of work in a team where one can produce work within the tight deadlines and to obtain results under pressure.

11 years experience including 5 years in developing countries, in the areas of pavement design, costing, construction using Asphaltic Concrete, sprayed seals, crushed aggregate basecourse, water bound Macadam and concrete, highway maintenance, road asset management

Drilling Consultant, Operations Manager, Directional coordinator, Directional driller

Detail oriented Construction Project Manager with over 10 years of experience with Federal and Private Contracts

Senior Certificate

Lead Offshore/onshore Pipeline Systems Project Engineering team

I would like to continue working in the safety and environmental field. My stronger attributes are in the safety field, but I do have several years experience dealing with environmental issues.

JOHN MARDEN - MARKETING AND NEW BUSINESS DEVELOPMENT LEADER

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

B.Tech Engineer with an heavy equipment experience.

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

SUPERVISOR AUTOMOTIVE FACTORY, RESIDENTUAL / COMMERICAL SUPERINTENDENT

I am Rosalie A, Aguzar proficient in Architectural Plans using Autocad with basic knowledge on 3ds Max (Architectural Design), Revit 2009 & Sketchup.

Project Interface Manager, Stategy Planning, Engineering/Projects Development/Management/Controls

Continuous opportunity for professional development in the field of Manangement and Business Administration, Banking and Marketing as well as Procurement and Logistics.

management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses.

Highly Experienced Operations Leader with expertise in guiding fundamental growth in the heavy equipment and manufacturing industries.

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

MSc. Civil Engineer, major: Land Surveying; 19 years experience of cadastral (legal) and public utilities and road surveying and topographical mapping

Performance driven professional with expertise in telecommunications, construction, and project management

Three year full time diplome in Mechanical Engineering and have six year experience in Repair and Maintenance of heavy earth moving equipments

US and overseas QA/QC project supervisory experience in the construction, petroleum, mining, wind power and aerospace industries. I am a CWI, Level II in MT, UT, PT and RT film interpretation. Past project duties and responsibilities have included review of purchase orders and exceptions, quality as

Please Contact ASAP

ECT in Electronic Engineering with 11 years experience in the Electrical Industry. Experienced and trained on LM2500, LM6000, TM2500s, GE frames T1/T3; PBX; GPS; Digital Switches; Nortel DMS 250/500 certified; Allen Bradley, Siemens, Fanuc, MarkV ,MarkVI,Woodward and Bachmann PLCs; COAX cable test a

Nuclear Operations Supervisor. Supervised operations ensuring safety of personnel and equipment. Supervised maintenance operations on I&C equipment.

Experience includes Cost Engineering, Electrical/Instrumentation Estimating, Construction Electrical Engineering and proprietary software support. Duties include reporting of various kinds, forecasting, change management, staffing plans, cash flows and more.

I'm 36 years old Mongolian man. looking for mining operations job. Such as mine foreman, mine planner, translator

A suitable engineering responsibility to help the Afghan reconstruction processes or assist the US Army Corps of Engineers in Afghanistan or Central Asia.

NCCO/NAHETS Certified operator. Northern California College of Construction Grad

It is with great interest that I am forwarding my resume for your consideration. My record of academic achievements and professional career history, demonstrates attributes that make me a valuable employee.

A self motivated metallurgist who is presently working with Ispat Metallics India Ltd (Ispat Group) as Engineer production, has wide range of experience in commissioning and Operations including excellent exposure to Level 2 models, wishing to pursue his career in an environment where his technical

Project engineering/managment

Mechanical?Electrical Engineer,Steel Expert,Steel Plant operation Incharge Marketing & Sales Incharge ,QMS,EMS.OHSAS Regd Lead Auditor,MBA9Business Admin.Professional Doctorate in Environmental Management.,Handled Projects as well as Maintenance,Director,European Quality Body,Managing Directoer Asia

Scaffolding Manager

Electrical Project/Construction Management

Project Engineer, Assistant Project Manager, Architect, LEED AP, BIM

Engineer with Business management,

Estimator, Project Manager, Project Engineer, Construction Administrator, Architectural Designer, CAD

Has 15 years of top, diversified logistics/operations management experience.

Work on a farm all my life, I went to school last year for heavy equipment

Experienced Buyer/Purchaser, very versatile background from different countries and industries.

19 years of experience as a Camp / Accommodation-Facilities Management (Staff Welfare Operation and Maintenance) in Oil & Gas, EPCC, Company (Road & Bridge, Electro-Mechanical Contractor.

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out