Resume - Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto ...

Misco Jobs

Resume #79593

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To look for challenging work which will utilize my skills and experience in static equipment design, requisitioning, bid evaluation, selection of equipment and vendor documents reviews.

PROFILE
- Over 13 years of strong mechanical experience in equipment design in EPCM and Fabrication industries.
- Experienced in Oil Sands SAGD projects, Refinery projects, Petrochemical and Chemical Industries projects.
- I have handled following major equipment
* Treater – 4,877 mm ID x 36,576 mm S/S Horizontal Dual Polarity Electrostatic Treater o Design pressure 1,470 kPag, and temperature of 163°C
o Designed for Dilbit flow rate of 324,102 kg/hr
* FWKO – 5,791 mm OD x 19,182 S/S Horizontal Free Water Knock Out Drums o Design pressure 1,470 kPag, and temperature of 163°C
o Designed for Dilbit flow rate of 380,283 kg/hr and Produced water flow rate 588,123 kg/hr
* High Pressure Steam Separator – 1,371 mm ID x 8,534 mm S/S vertical vessel c/w SS vanes o Design pressure 14,700 kPag and temperature of 343°C. Shell thickness 89mm (3.5")
o Designed to process 384,540 kg/hr of 75% steam. Separation efficiency of 99.7 % and 100 % for more than 8 microns of droplets removal from steam.
* Diluent Stripper Column – 5,487 mm ID x 28,823 mm T/T vertical vessel o Design pressure 525 kPag and temperature 350°C.
o Material of construction CS and SA-264 (CS+317L Clad), Internals SS 317L
- Experienced in detailed design calculation reports, preparation of engineering data sheets, bid documents, bid evaluation & recommendations, preparation of purchase requirement (MRP), shop fabrication drawings, trouble shooting of design problems resulting from shop and field capabilities and final documentation.
- Have good knowledge of welding and non-destructive testing.
- Fully conversant with ASME Sec. VIII Div. 1, TEMA (R, B, C), ASME (B16.5, B16.47, B31.3), BS 5500, API (650), UBC, NBC, AISC.
- Fully conversant with material specifications (ASME Sec II – Parts A,B,C,D, ASTM, DIN, BS), welding requirements (Sec IX), PWHT / NDE / MDMT requirements. Interact with all combination of materials like carbon steel, stainless steel, HIC and NACE resistant steels, and non-ferrous material.
- Wind and seismic analysis, Zick analysis, Nozzle reinforcement calculations (self reinforced, axial, radial), pressure calculations (internal & external), flange design, tube-sheets, local load analysis (WRC 107, BS 5500), support design (saddle, leg, lug, skirt), lifting arrangement.
- Hands-on experience with design handbooks such as Bedner, Megyesy, Brownell & Young, Moss etc.
- Fully familiar with PFD, P&ID, HAZOP reviews and model reviews.
- Technical coordination among various disciplines, vendors and clients.
- Excels in fast paced environment; successfully meets critical deadlines.
- Self-motivated, goal-orientated team player with effective communication and interpersonal skills.

Education & Certification

- BSc., First class with Distinction, 1995, Mechanical Engineering, The Maharaja Sayajirao University of Baroda (Baroda, India)
- Post Graduate Certificate course in Industrial Purchasing and Materials management, 1996-97, The Maharaja Sayajirao University of Baroda (Baroda, India)
- NDT level – II in radiography testing
- Internal Quality Auditing course certification – Lloyd's Register

ASSOCIATIONS/MEMBERSHIPS

- Association of Professional Engineers, Geologists and Geophysicists of Alberta (APEGGA) - Professional Engineer
- Professional Engineer of Ontario (PEO)

Computer Skill

- Design software: Compress, Code Calc, PV-elite, B-Jac, In house developed software/excel spread sheets
- AutoCAD 2004/2002/2000 and 14 (Custom AutoCAD Mechanical certification – Solid Caddgroup Inc), Vessel drafting programme, Visio
- Windows, MS-office (MS-Excel, MS-Word) & Internet utilities.

EMPLOYMENT HISTORY
Jacobs Canada Inc – Calgary, Alberta Sept 2005- Jan 2009
Senior Mechanical Engineer
- Preparation of equipment datasheet, RFQ packages for bid.
- Design run for the equipment thickness with applicable loading.
- Prepare and update mechanical equipment list and cost estimates.
- Carry out review of vendors' bids and documentations for technical acceptability. Prepare technical recommendation to select technically acceptable, safe and economical mechanical equipment and packages.
- Carry out above functions as per department work instructions, quality management manual, customer's specifications and codes & standards.
- Preparation of material requisition for purchase.
- Review of vendor drawings, documents and design calculation. Compare calculations with design run.
- Interfacing with vendor, other departments and client.
- Trouble shooting fabrication queries and maintain correspondence track.
- As built datasheet preparation.

Projects Handled
- Suncor Firebag 3+ (SAGD-62.5 kbcd design capacity / stage 3,4,5&6 - Total 250 kbcd)
- Suncor Energy o Responsible Engineer for Treater and Free Water Knock Out Package, High Pressure Steam Separators, Diluent Stripper Column, Flash Drums, Rich Fuel Gas Separator and Mixed Fuel Gas Separators
- K3 Sulphur plant SuperClaus retrofit - Central Alberta Mid Stream o The project is retrofit job. Trouble shoot site and/or fabrication queries for retrofit and new equipment.
- Shell Carmon Creek - Shell Canada o The project is a conceptual design and feasibility study for SAGD plant.
o Prepare cost estimate for static equipment

WorleyParsons MEG – Calgary, Alberta July 2005 – Sept 2005
Jr. Mechanical Engineer
- Preparation of equipment datasheet, RFQ packages for bid.
- Preparation of bid analysis and recommendations for static equipment and packaged equipment.
- Review of vendor drawings and design calculations.

Designer / Engineer
Pro-Bel Engineering Limited – Ajax, Ontario Oct 2003-May 2005
Equicon Engineering Limited – Mississauga, Ontario Feb 2001- Oct 2003
- Detail study of clients'/customers' architectural and structural drawings.
- Preparation of concept drawing c/w design calculation for incorporation in shop drawings.
- Preparation of shop drawings and fabrication drawings on Auto-cad.
- Preparing design calculation for rigging sleeves, anchors and davits for approval of professional engineer.
- Preparation of fabrication drawing with bill of materials, welding sizes, tolerances.

Mechanical Design Engineer
L&T Chiyoda Limited - Baroda, India Jun 1998- Sep 2000
Project Technologists Pvt. Ltd. - Baroda, India Aug 1995- Jun 1998
Engineering, procurement, fabrication and construction related to oil and gas, refinery, petrochemical, chemical industries.
- Detail Engineering experience of static mechanical equipment such as pressure vessels, heat exchangers, columns, storage tanks and other process equipments.
- Experienced for different types of heat exchangers.
- Engineering drawing and vendor drawing checking experience.
- Supervise, schedule and coordinate design and engineering work.
- Interface with vendor and consultant for the approval of drawing and design calculations.
- Co-ordination with process, piping, instrumentation and civil department for interfacing.
- Proposal engineering for equipment with Technical Bid Analysis (TBA). Contacted appropriate vendors and conducted techno-commercial evaluation of offers.
- Site deputation for erection of vessels, columns, heat exchangers, tanks, converters, sulphur condensers, combustion chamber
- Preparation of overall project cost, materials, item specification & indenting of materials.
- Verified and approved equipment drawings for mechanical design done by other engineers or by vendors.
- Validation of software.

Projects Handled
- Solvent Deoiling / Dewaxing Unit - Indian Oil Corporation Limited (IOCL) Digboi, India o Responsible Engineer for Heat Exchanger mechanical designs.
- Sulphur Recovery Unit - Bharat Petroleum Company Limited (BPCL) Mumbai, India
Sulphur Recovery Unit - Madras Refinery Limited (MRL) Madras, India o Responsible Engineer for Pressure Vessels, Sulphur Condensers, West Heat Boiler, Vacuum towers.

REFERANCE: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 1136)

Go to Search Parameters...

Brief Description

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

Educated to a high level with well developed interpersonal skills. A proactive, result orientated style of working, is supported by a broad range of practical skills and knowledge. A keen sense of self worth and ambition are tempered by a proven ability to achieve within a professional environment.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

Nace level 3 coating inspector, CINI certified insulation inspector & Chartek certified fireproofing inspector.

Integrated Buidling Systems Manager, Project Manager, IT Manager, CMMS

Rotating Equipment Engineer with 9 yr Experience

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

13 Years with Onshore & Off shore, OIL & GAS refinery & Shutdown .

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Paramedic with 22 years experience in emergency care , Remote Site Medic certified, ACLS Provider, BLS Instructor, HSE Safety Coordinator, Divemaster/Rescue Diver. Work experience includes managing muti national task force in middle east, and provision of clinical care in south asia remote sites

Project Management. Scheduling, Ms.Project, Primavera, Budgetting. Engineering. QS, AUTOCAD, Structure Analysis, SAP2000, Site Engineer.

Organized, dependable, multi-task project manager with customer service, budgeting, accounting, computer skills

Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction

16 years Safety Construction, Developer of Behavior Safety Assurance Formula, Bs Occupational Safety and Health

Thorough knowledge of material management property management, accounting management, procurement and inventory management.

A post graduate student currently completing MSc Environmental Conservation and Management. A fast learner, willing and able to grasp new technology. A competent team player, adept at following instructions and capable of working on own initiative. A highly motivated person, eager to find a vacancy

Human Resources/Recruitment Internal & External/Projects - Systems Coordinator Overseeing of Project Managers & Their Teams Aust & Oversees/Mining & Gas Industry/Management/OHS Rotational shifts/FIFO/Shift Work. I have just returned from Nauru where my partner was the Operations Manager in the Mines

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

Seasoned Project Management professional with significant field experience in Civil construction projects including Quantity Surveying. Background includes successful execution of bridge & industrial building project. Solid leadership, teamwork and project management capabilities.

Security, Dozer Operator, Roller Operator, Oilfield preparations and Construction work.

Management/Business Development of Engineering/Consulting Services

Over 10 year experience globally, CEE, Europe in general management, logistics, transportation and supply chain - excellence in strategy, costs optimization, business development, operational excellence, change management and restructuring

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Hull / fields/site engr. structural detailer have an experience in shipyard industries.

Over 20 years of diversified management experience with an extensive background in the management, selection and maintenance of vehicle fleets, over the road and off road construction machinery.

IT PROJECT MANAGEMENT

Safety/Env (HSE) post sought (Will also accept Quality related positions) Reliable/Flexible/Language proficient - Willing to work worldwide, available from June 2009

Logistics Manager, Rig Manager, Materials Manager

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

Working on projects for various E&P Companies and Contractors

Safety Manager/Auditor with Fire/Security and Enviromental experiance

Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.

Totally, more than 18 .6 years of experience in Diversified Fields, of which 15 years in Retail Trade in a Service-Related industry & 3.6 years in Wholesale Trade.

HVAC/Building Systems & Energy Engineer

Provide Project Control Scheduling Support

Experienced Drilling Manager / Supervisor, BS Mining engineering, 20+ years in non-oilfield drilling, international drilling management and accomplished mud engineer.

Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto cad Software

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

A 41 years young, energetic and Resourceful, a graduate from college of education Ekiadolor, Benin City, Edo State with National Certificate of Education (N.C.E) in Economics and social studies with 13 years experience with Dickson international limited (Offshore), Niger Construction limited (Onsho

African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan

Over 25 years of design and engineering experience; providing design, engineering and management services for a variety of projects and fields. Expertise includes estimating, conceptual and finalized layouts, piping design, instrumentation, process, P&ID development, sizing/specifying/requisitioning

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Electrical maintenance / commissioning Engineer

Africa specialist - 25 years Africa experience, 16 years work experience, general management (production, materials, logistics and international transport fields), 14 of which are at managerial level, the last 11 years being spent as an expat in West Africa and West-Central Africa.

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out