Resume - Experience/Knowledge in: * Classification Survey * Statutory Survey * Ship Oper...

Misco Jobs

Resume #80021

CONTACT INFORMATION:
View contact information...

Naval Architect & Marine Engineer * QHSE * Diverse Fields of Engagements

CAREER OBJECTIVES

* To discover and explore my full potentials in Engineering especially in the Marine and or Oil & Gas field's Business, Project, Operation, Management, Design and Construction by holding positions which will employ and develop further my Knowledge, Skills & Experiences

CAREER OVERVIEW AND CAPABILITIES

Verse in:

* Classification: Systematics/Process
* Rules/Instructions to Surveyors
* Certification
* IACS Standards:
* IMO: Conventions, Codes, Resolutions--Past, Present and Future requirements
* ISO Standards
* OSHA Satandards

CAREER HIGHLIGHTS

* HSE Superintendent Swiber Offshore Marine PTE LTD 2008-Present (Singapore)

Responsible for the Implementation of QHSE Management System Onboard all the Vessels (AHTS) of the Fleet (Marine Vessel Spread) by Personally Visiting, Staying and Guiding all Personnel—from the Masters down to the Stewarts—during Operations in various Offshore Projects in different countries.

Conduct in-house Training. Assist and Train Shipboard Officers in implementing Shipboard QSMS. Inspect Vessels and Provide HSE Report and Follow up Actions with the Various Office department Heads. Provide Training for all crew on implementation of the QSMS. Implement & Monitor the Company QSMS. Implement & Train all Crew on the BBSI - SMILE CARD. Inspect that the Maintenance of the Towing Equipment and Gears are in Place. Review and comment on Vessels' filing and Documentation Control. Conduct Audits on Vessels' HSE System, audit closure and any clients / 3rd Party Inspection Reports Closure. Conduct Drills and HSE Trainings and Submit Reports to Office on the Drill/Training from the Ship and Recommend Improvements. Conduct Ad-hoc Emergency Response Drill and assess vessel's crisis management control. Encourage Crew to Exercise Stop Work Responsibility and particularly, Master to exercise OVERRIDING AUTHORITY. Briefing of New Officers prior to Joining Vessels. Provide Office Management with a report on the Vessels' condition, ranging from logbook, record books entries to physical conditions. Observe and Report on Vessel's Performance and Limitations. Brief Officers on the HSSE Plan, Mini HSE-MS Review & Full HSE-MS Audit. Conduct Verification on Action tracking as per Marine Network Minutes. Conduct Mini HSE MS Review & Action Plan Onboard.

Experience Gained:

* Engagement in Diverse and Multinational Oil and Gas Projects: Brunei Shell Petroleum Company, Murphy Sarawak Oil Co., Ltd., CONOCO Philips etc.

* HSE Engr. Saipem, S.p.A., (Southeast Asia, Trench/Pipelay Barges and Platforms) 2007-2008

Liaise with and Provide professional advice to the Head Office, Vessel Management and Department Heads on methods to take—to adhere to and/or satisfy Company Specified Requirements and Statutory Regulations—while carrying out Subsea Pipeline Construction, and Platform Commissioning Tasks/Activities: ensure Safety at work is not compromised.

Ensure that all safety systems and equipment (Active and Passive) are in place, fully operational and correctly serviced. Administer, monitor and audit the Vessel Permit to Work System. Facilitate, Chair, and Evaluate Meetings and Trainings to the Management and Workforce on Safety Related Requirements/Information (Alerts, Regulations, Standards' dictated practices, Manufacturers' Technical Requirements etc.). Facilitate Accidents/Incidents Investigations and Corrective Actions. Evaluate, and propose new developments in, Company Procedures as dictated by Operational Needs with consideration of Regulatory Requirements. Ensure that Safety Awareness Campaigns are effective thru monitoring and evaluation of (SHOC) Hazard Observation Cards. Report Monthly HSE Performance and Future Plans to Head Office.

Experience Gained:

* Engagement in Diverse and Multinational Oil and Gas Projects: Carigali-HESS Operating Company, Tangguh British Petroleum, Taichung-Tunghsiou-Tatan Pipilene, CNOOC LNG etc.
* Prepared and Coordinated with Client—Project HSE Procedures: Training, HAZID/HAZOP, Emergency Preparedness, Safety/Hazard Observation, Incident Investigation etc.
* Project/Operational Safety in Offshore Subsea Construction—Trenching and Pipelaying (including Tie-in)
* Attended Helicopter Landings
* Prepared and Audited/Inspected Pre and Post Job Safety/Environmental Requirements (Permit to Work, Job Safety Analysis, Risk Assessments etc.—Hot/Cold Works, Over-the-side Works, Scaffolding Works, Offshore Diving Operations, Mechanical/Electrical Isolations, Confined Space Entry, Handling of Hazardous Substances, Compress Gasses Use, Blasting and Painting Operations, and Radiographic Works)
* Performed Hygiene and Housekeeping Inspections
* Arranged and Facilitated Emergency Exercises for Personnel of 360 pax. and above
* Represented the Company in Clients' Inspections to verify compliance with Government Legal Requirements and Company Specified Requirements
* Managed Safety Trainings for the Workforce—Requirements, Scheduling, Evaluation and Certifications
* Arranged rewarding schemes to promote Safety Awareness, Safety Performance etc.
* Exposure in Rigging/Lifting Standards/Activities in Subsea Construction activities
* Performed Scaffolding Inspections

* Safety / ISO Representative Ciserv, Wärtsilä Services 2005-2006 (Dubai, UAE)

Assist the Management Representative (Vice-President, Accounts & Admin) in maintaining ISO Certifications: ISO 9001:2000, 14001:1996 and OHSAS 18001:2001 (Integrated Management System) for Marine Repair, Maintenance and Engineering Works Operations.

Advise and Facilitate the Management for approach to Correct Nonconformities and Observations—on System, Procedures, Accidents & Incidents—from External and Internal Audits by Performing Investigations (Root Cause Analysis) to develop/improve new/existing procedures for every Department (Ship Repair Operations, Purchasing, HR & PR, QA/QC, Storekeeping, Workshop, Safety et.al.) that conforms to Legal and Customer Requirements. Advise on Operational Safety and Environmental Hazards thru Risks Assessments, Environmental Aspects Reviews and Legal Requirements Reviews. Develop and Introduce New Methods to Evaluate Process Performance of Departments in relation to the ISO Elements and Company Objectives & Targets. Facilitate Trainings (Safety/Quality) to Employees as dictated by Legal and Company specified requirements. Advise management in Management Review Meetings to align Planning and setting of Objectives & Targets with the ISO Standards.

Experience Gained:

* Prepared Welding Procedures Specifications (WPS, ASME Sec. IX) for Welders' Certification
* Improved Emergency Procedures for Company Contingencies
* Practical Six Sigma Quality Management
* Initiated/Facilitated development of Planned Maintenance System (PMS) for Workshop Applications
* Represented the Company in Government Agencies Inspections to verify compliance with Government Legal Requirements and Rules & Regulations
* PCFC Rules and Regulations (Health, Safety and Environment) applications in Workshop Processes supporting the Company's Scope of Services
* Investigated an Accident (Quality) of a Level 2 Category involving around USD 150,000 of Product NC

* HSE Representative Sonatide, Tidewater Marine (Chevron Texaco, South Africa) 2005

Assist the HSE Manager in ensuring that the Company Health Safety and Environmental Policies, Procedures, Plans and Guidelines/Checklist are adhered to by all employees (Offshore/Onshore) in all aspects of operations; and promoting safety consciousness and culture in the day-to-day activities of the Company. Provide Statistical Data of illnesses/injuries, deficiencies, incidents/accidents and near misses to: analyze safety of operations, forecast unsafe conditions, improve/develop specific instructions of mitigations (JSAs, Correct PPEs use, Toolbox Talks etc.), and plan for better operational performance in terms of Lost Time Accidents (LTA) through Reports and Vessel Visits - Inspections, Hazard Observations and Safety Meetings

Manage Safety Equipments' distribution (logistics), inspection, servicing and certification

Experience Gained:

* Exposure in Offshore Vessels (over 46 in no.) Operation in the West/South African Oilfields
* Developed skills in more stringent requirements/standards of costumer (Chevron Texaco) for Safe Operations in the Oilfields, Dock and Shore base
* Enriched skills in diverse types of Offshore Vessels' inspections and internal audits
* Conducted Safety Trainings, Meetings, Drills and Inductions to Locals and Expats - both new and old
* Represented the Company in Chevron Contractors' HSE Reps. Meetings
* Developed skills in utilizing Behavioral Base Safety Method (BBS) to analyze, target and plan for Safety Concerns/Issues
* Developed skills in Root Cause Analysis Investigations, LOTO (Lock Out/ Tag Out) systems etc.

* Safety Officer Philharbor Ferries & Port Services 2004

Represent and report to the Designated Person or Owner in ensuring the Safe Operation of the Ships & Protection of the Environment and providing a link between the Company and those on board by; effectively implementing, maintaining and improving the Safety Management System (SMS) in Compliance with National/International Legislations', Classifications' and Company's Requirements.

Experience Gained:

* Developed Safety Plan for RoRo Passenger Vessels' Operation and Maintenance, incorporated in the SMS Manual which included but not limited to:

- Safety Management Policies and Procedures
- Risk Assessment
- Facilities and Equipment
- Operations and Maintenance Procedures
- Training and Qualifications
- Contingency Planning

* Performed Periodical Safety Inspections, Testing, Examinations, Drills etc. as Indicated, Scheduled and Assigned in the Safety Plan

* Performed Internal Safety Audits of all the Vessels in Preparation for External Audits

* Ensured that all Mandatory Safety Meetings in line w/ the evaluation of the Effectiveness of the Safety Plan are performed and reported by the responsible Personnel on board and that Identification of deficiencies and necessary corrections to the same are made

* Coordinated with each Vessels' Technical Superintendents to assure that Safety during performance of their Jobs is not Compromised and are in accordance with the Safety Plan

* Projects Completed:

- Company ISM Full-Term Certification (Document of Compliance, DOC)
- Vessels (M1 to M7) ISM Interim/Full-Term Certification (Safety Management Certificate, SMC)

* Surveyor Det Norske Veritas (Manila/Singapore) 2002-2003

Represent the Classification Society, Conventions and the Administrations in assuring Ships In Operation Compliance w/ Rules and Regulations through Periodical and Occasional Surveys in Anchorage, Docks and Shipyards.

Experience Gained:

* Developed skills in IMO Legislations - Past, Present and Future Amendments and Requirements (Operational & Technical): Conventions, Codes, Circulars, Interpretations and Clarifications applicable for different Types of Ships "New, Existing and All Vessels"
* Developed skills in IACS - Standards: Unified and Procedural Requirements, Unified Interpretations, Recommendations and Internal Guidelines
* Developed skills in Classification: Systematics/Process, Rules, and Certification
* Developed skills in diverse range of Standards: Inspections, Testing methods and Acceptance Criteria
* Experienced and Developed Higher-Level Skills in Negotiation, Communication, Planning, Writing/Reporting in working with a multi-race environment
* Surveys Conducted:

- Classification - Main Class/Additional Class (Annual, Intermediate, Renewal)

- Statutory (Annual, Intermediate, Renewal

- Miscellaneous

* Surveyed Ships:

-Tankers: Oil, Ore and Chemical (ULCC and VLCCs)
-Tug and Supply Vessels
-Bulk Carriers
-RoRo Passenger Vessels

* Assistant Superintendent Magsaysay Maritime Corp. 2002

Initiate, Plan, Execute, Monitor, Control and Record the conduct of ship repairs, maintenance and operation to the satisfaction of the Owners, Management, Administration, Classification Society and Ships' Crew

Represent the Fleet Manager or Superintendent in their absence

Manage Vessel Database: Spares, Provisions/stores, Maintenance and Repairs, Requisitions (Material or Service), Inventory, Costing and Preventive Maintenance System Program (machineries/equipments/hull/fittings)

Superintendent for Aluminum Fast Craft

Experience Gained:

* Developed skills in Safety and Quality Management System
* Develop skills in Project Management
* Developed skills in Computer based Management System using Microsoft Excel and Microsoft Project
* Attended repairs and maintenance works of an Aluminum Fast Craft Vessel
-Vessel Inspections
-Repair Scope Preparations
-Coordination with Stakeholders: Ship Owner,Management,Contractors
-Oversee, Evaluate and Accept completion of repair works and deliveries
* Participated in the Development of SMS Manual (Documentation) and Internal/External Audits
* Interviewed Ship Crew Applicants
* Project Completed:
-Acquisition of an Aluminum Catamaran Ferry in Hong Kong:
. Participate in Negotiation with Previous Owners on matters regarding the Sales Contract, Procurement Specifications and Other Requirements
. Coordinated with: Owners, Office, Consultant, Class, Administration, Insurance, Shipyard, Agents and Contractors; on Operational, Class Re-instatement, Statutory, Scope of Work, Activity Duration, Work Progress and Budget/Cost; Requirements and Acceptance (Hong Kong & Philippines)
. Attended Drydocking: Repair and Upgrade (including M/E repowering) works at Cheoylee Shipyard
. Planned Procurement: Specification, Delivery time and Cost Comparisons
. Counter Checked Consultant's advise on the lifting requirements and method in shipping the Vessel as Cargo, and Saved the Company over a Million in Shipment Cost

* Consultant Grand Asian Shipping Lines 2001

(Short-term Contract/Assignment) Evaluate the Design of a Jumboized (Lengthen) 5,000 dwt Tanker Barge, primarily to ensure Structural Integrity and Propulsion Performance.

Experience Gained:

* Performed Design Reviews and Onboard Inspections/Verifications
* Applied Naval Architecture Structural Strength Analysis for the Primary Response (Hull Girder) and Tertiary Responses (Individual Members) of the Vessel using Auto CADD
* Advised the owner to improve continuity of the Tertiary Members by modifying the existing "Clip connected" Bulkhead Terminations of the Vessel into Continuous Members (Through and Through) within 40% of Length of the Vessel
* Performed Taylor Propulsion Analysis, which resulted in the acceptability of modifying the existing Propellers

* Design Naval Architect Propmech Caterpillar Corp. 1999-2001

Prepare designs, drawings (Auto CADD) and calculations for all aspects concerning powering/repowering/re-engining of new & existing ships to Caterpillar Marine Engines:

-Hull resistance & speed
-Stern gear (inboard coupling to propeller)
-Propeller sizing/re-sizing
-Engine Systems Piping/Circuitry (Fuel, Lubrication, Air Induction & Exhaust, Cooling, Mounting, Alignment & Vibration etc.)
-Engine bed foundation
-Local Members (Rudder, Shaft Brackets etc.)

Function mainly in the objective of the Design and Engineering Department as auxiliary to the Marketing, Sales and Service Departments

* One of the Pioneering Members of the Engineering and Design Department

Experience Gained:

* Developed Skills in Planning, Design and Calculations using AutoCADD, MS Office, Nav CAD, PropExpert
* Developed Objectivity and Creativity for more economical & efficient alternatives in any assignment
* Developed Skills in Team Work, Communication and Writing/Reporting
* Have made numerous Prowering/Repowering Studies and Designs of Different Vessels from Heavy Displacement to Planning Hull Types
* Used Standards, Rules, Regulations and Technical Guidance: JIS, ABS, GL, NAVSHIPS, Caterpillar, Marine Gears: Tonanco, Reintjes etc. in Preparing Designs and Calculations of Machinery Circuitries/pipings/fittings, Structure, Drivelines, Attachments, Mountings etc.
* Worked with the Marketing and Sales Department in Preparations for Biddings
* Represented the Company in Technical Disputes regarding Designs and Installations
* Worked with the Service Department in performing Engine Mounting and Alignment, Sea Trials and After Sales Support i.e., Trouble Shooting: Vibrations, Structural Failures, Exhaust Break-downs etc.
* Assisted Ship Owners in Conceptualizing and Designing their New Ships and Ships for modifications
* Projects Completed:
-Philippine Navy LCUV-291 (Landing Craft Utility Vehicle)
-RPS Atyimba (Survey Ship)
-PCG-67m Multi-role Vessel
-BFAR 27ft FPB
-Fishing Vessels
-Aluminum Catamaran Vessels - Newbuilding FBMA
-Oil Spill Pollution Vessel - Newbuilding

* Part-time Faculty University of Perpetual Help Rizal 1999-2002

Teaching Experience:

* Naval Architecture Subjects: Structural Design, Subdivision & Stability (Intact & Damage), Resistance/Powering & Propulsion and Ship Design
* Engineering Subjects: Strength of Materials and Hydraulics & Pneumatics
* Marine Engineering Subjects: Marine Diesel Engines

* Board Examinations Reviewer in Engineering Mathematics

TERTIARY EDUCATION

* Naval Archi. & Marine Eng'g. University of Perpetual Help Rizal 1994-1999

PROFESSIONAL EDUCATION

* Classroom Courses

SINGAPORE MARITIME ACADEMY, OPITO—Boat Travel Safety

BRUNEI SHELL PETROLEUM, Safety Passport

BRITISH PETROLEUM, HSE Engr. Safety Passport Training

A1 SAFETY TRAINING UK, Oil and Gas HSE Engr.

CONSOLIDATED TRAINING SYSTEMS, INC., OPITO COURSES—BOSIET-Basic Offshore Safety Induction & Emergency Training, BSEP-Basic Safety & Emergency Preparedness Course (Including Airpocket) Cert. No. 07BOSIET-012-004 and 07BSEP-003-004

FAR EAST MARITIME FOUNDATION, BASIC SAFETY TRAINING (Personal Survival Techniques, Fire Preventing & Fighting, Elementary 1st Aid; and Personal Safety & Social Responsibility)

AUTODESK, Auto CADD 3D Modeling

CATERPILLAR, Marine Analyst

LLOYD'S, ISO 9001:2000 For Internal Auditors Cert. No. 00199

TECHNOFIBRE, Lifeboat Safety Systems; Guidance to Performing Safety Checks & Inspections

UPHR, Short-Term Course in College Teaching (240 Hrs.)

* Web Courses

NEBOSH (The National Examination Board in Occupational Safety and Health)

Non-Destructive Testing

Lifting Appliances of Ships

Handling of Substandard Vessels

Rudders & Rudder Damages

Machinery and Survey Arrangement

Marpol 73/78 SiO/New Building

Project Management Institute (PMI)'s Project Management Professional

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1117)

Go to Search Parameters...

Brief Description

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

Electrical Project Planning Engineer (Primavera P3 & P6) with MBA Degree

Project, Project manager, maintenance, maintenance manager, production, production manager, mining, heavy equipment

Controls Engineer, ControlLogix, Manufacturing Engineer, Engineering Manager, PLC Programming, Robotics, Machine Vision

Mechanical foreman and non-destructiv testing inspector

Front line supervisor, to train the trainer, mine development jumbo lead hand, OH@S,first aid certificate

Marine chief engineer(unlimited)- shipbuilding supt, A team player,good manmanagement qualities,likes to involve in a project from concept to completion within strict time/budget controls.

Need a hot new job - crane operator

I have been working in the mine industry for the past 30 years. Recently reassigned to site services for DeBeers Canada Snap Lake Project. Currently gaining experience on the several sizes of Komatsu loaders, Bobcat, Dozers, Water and Fuel Truck.

Many years of experience, very detailed orientated.

MEP Manager ,MS Office & Internet,AutoCAD,Communication ,Negotiation,Co-Ordination &Organization,Effective Time & Coast Management Skills

Senior Manager looking for a new challenge with expectations of executive advancement upon successful proof of capabilities

Manager of Metallurgy, Process Engineering, Project and Construction Management.

Project Management and Mining Engineering Professional with 19 years experience

I have 35 years experience in the security field.

An ambitious and highly skilled Quality engineer with extensive experience in quality engineering, ISO certification, production, management, product development and launch, and customer support.

Versatile, knowledgeable, exploration geologist

Senior Project Management, Profit and Loss, Project Planning, development and execution. Consultancy in the areas of safety, risk management, and techncal writing and editing. Major contract administration for a multi-national firm in Saudi Arabia on two different assignments.

Approximately 3 years experience in Production Planning, Scheduling & Inventory Control, ERP(BaaN)implementation, Production, Manufacturing, Industrial Engg., Production Management, Process Re-engg., Product Development, Product Costing.

Well-rounded professional office/field experience in project controls, process engineering, environmental engineering, construction, management, sales, and business consulting. Industries: oil and gas, federal government contracting, residential construction.

Former Australia SF; SAS Regt. 19 yrs int'l experience, 3 yrs Regional Manager China & Sth EA. Strategic planner drawing on yrs in difficult & demanding environments.

Sr. Project Controls Planner/Scheduler

Total Experience of Eighteen, encompassing as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

Over 19 years in Oil and Gas and Petrochemical Projects involved in Mechanical Completions, Pre-commissioning, Commissioning, Operating and Training. I have good experience in Gas Treatment and also have good Offshore experience.

16 yrs Experience in E&I of Oil/Gas/Petrochem/Metal/Cement industires, direct and EPIC

Operation Manager for Corrosion Engineer & Inspector

Logistics and Procurement Specialist

Computer software knowledge: Supervisory Control and Data Acquisition (SCADA) software’s - iNEXUS Pro, - Wonderware inTouch, - iFIX Intellution, Echelon Lonmaker for Windows, LNS DDE, PC literate - Microsoft Office, Windows, VPN – Virtual Private Network and IE

Management Professional 20+ yrs exp.

Comprehensive international leadership in Environmental, Health, Safety and Sustainability. Extensive experience in Asia with top multinational firms. Excellent cross-cultural skills in Indonesia, Singapore, Malaysia, Thailand, Philippines and China. Speaks Bahasa Indonesia conversationally.

Planning, Scheduling and Cost Control Engineer

Control & Instrument Commissioning / Maintenance Engineer 01.10.2006

having 5 years expreience in construcion safety, managing toll operation, and also having one year experience with indian army.

Free! I have 16 years post qualification experience as a Project Engineer, project Controls engineer, Cost Engineer, Planning and Scheduling engineer. I have worked both on opeerator's team and contractor side. My experience spanned through deepwater projects in oil and gas industry, EPC projects etc

NEBOSH Health & Safety General Certificate

Mechanical and Production Engineer with 20 years of mechanical design, project engineering and management experience in England, Chile, Argentina, Peru, Cuba, Canada, USA and Australia, fully bilingual in English and Spanish.

Offshore Production Operations & Offshore Construction Operations

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.

Project Manager/Manufacturing Manager/Site Safety

Manage the Camp Administration,Team work skill,having attitude to manage.Result oriented & communication skills that to share to others

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Experience/Knowledge in: * Classification Survey * Statutory Survey * Ship Operation/Management/Audit * Shipbuilding * Ship Repair/Modification * Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) * Quality/Safety Management & Certification * International Standards * Project Management

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Business Management professional - travel, tourism, travel e-commerce and travel process outsourcing

A qualified and internationally experienced Mechanical Engineering professional graduated from Kirikkale University (Kirikkale/TURKEY) with a Bachelour of Science Degree in Mechanical Engineering in June 1997 followed by a Master of Science Degree in Mechanical Engineering from Texas A&M University

Dear Sir/Madam: I would like to explore the possibility of joining organization. The enclosed resume will provide you with information concerning my abilities, employment history, and educational background.

HR Management, Project Management, Consultant

DIRECTOR OF GLOBAL SOURCING / Asia Procurement Strategist • Multi-cultural Relationship Development • Product Innovation / DEDICATED TO HELPING COMPANIES SUCCEED IN ASIA

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out