Resume - Electrical engineer, Matlab, PLC, Labview

Misco Jobs

Resume #84843

CONTACT INFORMATION:
View contact information...

OPEN FOR RELOCATION

ELECTRICAL ENGINEERING PROFESSIONAL
A dynamic team spirited and performance driven engineering professional with an extraordinary blend of leadership, business, and practical industrial knowledge. Ability to communicate and motivate team members to enhance strategic goals and bottom line objectives. Solution oriented trouble shooting skills complemented by meticulous and creative detail to drawings and specifications. Expertise is broad in scope and includes the following skills:
* Matlab and Simulink programming (intermediate level)
* LabVIEW programming (beginner level)
* PLC programming (ladder logic and functional block diagram methods)
* SCADA programming and screen development
* Human Machine Interface (HMI) programming

Project for the Masters degree: A transfer function approach for the advance Control Engineering topics
A transfer function approach is an alternative method to the state space approach to control systems design. The advantage of this approach is that it provides common framework for the modern control techniques to design a controller. This project includes tutorials on implementation a transfer function approach for some advanced control systems topics: PID controller, pole placement controller, internal model control, anti windup controller, Smith predictor, minimum variance controller, model predictive control, and linear quadratic Gaussian control. Matlab codes and Simulink models are prepared to demonstrate the transfer function approach.

PROFESSIONAL EXPERIENCE

MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LIMITED, MH, India.
Section office, distribution engineer, (2 years) May 2005 - July 2007
Role and responsibilities:
* Achieved high (11/22 KV) and low (220/440V) tension line loss reduction
* To perform preventive and breakdown maintenance
* To perform regular energy audit, survey of sites and generating estimation of materials for new distribution transformer center, new electricity supply connections for industrial, commercial, and residential categories
* To minimize distribution transformer failures by routine maintenance and load balancing techniques.
* Maintained continuous and reliable electricity supply to consumers.
* Implemented energy saving scheme (Single Phasing, Akshay Prakash) and public awareness camps in rural areas
* To detect and resolve electricity theft cases
* To recover pending amount of energy bills for increasing company profit and revenue
* Served as company liaison communicating with suppliers, vendors, and consumers
* Performed managerial duties with leadership by maintaining coherence among subordinate workers

AUTOMATION AND SOFTWARE SOLUTIONS, MH, India.
Instructor (faculty) and project member, (1 year) January 2004 - April 2005
Role and responsibilities:
* Developed PLC programs for clients from various engineering fields
* Developed SCADA screens and animations, and their interaction with related process
* To Communicate between controllers, PLC's, sensors, motor drives, and other control components
* As a teaching assistant, taught PLC programming, configuration, interference, and trouble shooting
* PLC: Allen Bradley – SLC 500, RSLogix500 and 5000
GE Fanuc – Versa Pro
SCADA: RS View 32, Cimplicity, Elispe
AC / DC drives: Eurotherm, GE Fanuc

EDUCATION

University of Alabama at Birmingham (UAB), Birmingham, Alabama.
Masters of Electrical Engineering May 2009

Government College of Engineering Aurangabad, MH, India.
Bachelor of Electrical Engineering May 2002

Computer Proficiency:

* MATLAB
* Labview
* Microsoft Office
* C and C++ Programming
* Preliminary JAVA programming
* Computer Networking

EXTRA CURRICULAR ACTIVITIES

* Participated in State Level Chess Championship held at Aurangabad, India in 2001.
* Played many inter collegiate cricket and chess matches.
* Member of the Indian Student Association (ISA). Actively participating in organizing fun and cultural events.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1119)

Go to Search Parameters...

Brief Description

As a Project/Contract Mgr, my background is in Construction. I have worked with Owners/Clients, Architects, & Engineers. I am experienced in continuous improvement in construction, process, & people mgmt. I'm experienced in business & project mgmt in small, large, & mega const. projects.

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

Crane/Rigging Trainer, Crane/ Lifting Equipment Inspector, Safety Advisor, Crane/ Maintenance Engineer, Rigging Supervisor, Terminal Supervisor

I have a methodical and well organized approach to work environment and have excellent interpersonal and communication skills. I can very well interface with colleagues at all levels. I have an experience with working in an integrated team environment and can deal with short time frames

Electrical engineer, Matlab, PLC, Labview

Instrument and Electrical Technician/System Integrator with over 10 years of experience in Control Systems, MS SQL and Microsoft Office. Proficient in troubleshooting VFD’s, Process Control, HMI design, construction and troubleshooting of industrial servers and workstations/communications.

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

Experienced Offshore Plater - Coded Welder. Norwegian Survival Certificate, European Survival Certificate, Mexican Work Visa

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Results-driven individual with proven background in engineering, scheduling, cost control and quality assurance in power generation, biotechnology and manufacturing industries. Demonstrated in-depth knowledge in Primavera 6.0 for Nuclear Power Generation Projects.

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

I have over four years experience in oil and gas production operations and one year experience in a construction industry. The oil and gas experience covers: Jack up rig, Start up, process operations, enhanced recovery, Fuel gas system, artificial lifting, centrifugal compressor, Control Room Operat

Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.

Over 16 years of installation and troubleshooting experience within the instrumentation field in various chemical plants. Also have four years of process chemical operating, troubleshooting, and making recommendations for plant safety, quality and quantity of plant production.

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..

I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.

SAP Materials Management, ARIBA E-Procurement, Purchasing, Inventory and Warehouse Management

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

I have four years of hands-on benchwork experience in chemistry labs in University of Houston as a research assistant.

Technical, Managment, communication. Skills

maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

Masters Degree in Chemical Engineering

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

Over 8 years of electrical overseas experience on US Embassies, US Consulate, and Lockhede Martin

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

MWD, drilling, construction

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

Camp attendant ( Customers Service) Hard working(drivers abstract 4-5-6-)

Experienced resource manager with teh ability to perform well under pressure. Extensive experience working overseas with multiple nationalities. Quick learner with a diverse work history.

analyst

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

P&PCM, MBA, B.Arch

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out