Resume - I am a Graduate in Mechanical Engineering with four years experinece in the fie...

Misco Jobs

Resume #85096

CONTACT INFORMATION:
View contact information...

Career Objective:
To secure a challenging assignment that offers responsibility and growth, to play a prominent and imperative role in the development of the organization.

Academic and Technical Qualification
Bachelor Degree (B. Tech.) in Mechanical Engineering from University of Calicut.

General responsibilities
* Audit the Work of all subcontractors and departments at stipulated intervals.
* Leading the inspection and execution of work in Mechanical, Welding, with team of QA/QC technical assistants following an approved Inspection and Test Plan.
* Interpreting RT films, preparing report and specifying repair procedures.
* Preparation of radiography shooting technique meeting customer requirements and getting it approved.
* Performing activities like Welder's Qualification Tests, Destructive testing, NDE etc.
* Ensure all the instruments are calibrated and re-calibrate before the due date.
* Lay down guidelines and solutions for day to day production related problems.
* Conduct management review meetings to inform the management about the quality of work and resources required.
* Coordinate inspection activities at Subcontractor's premises with inspectors / Third Party agencies.
* Conduct and Participate in Internal Quality Audits as per ISO requirements.
* Monitor the closure of all Non-conformance reports (NCR'S) to ensure the compliance with Preventive action proposed.
* Conduct feasibility study for new enquiries and define technical specifications of equipments required, WPS and describe the scope of work.
* Monitor heat treatment activities and decide the most suitable heat treatment procedure to meet customer specification.
* Conduct audit at the vendors and Subcontractor sites on random basis.
* Make sure that the latest revision of drawings and Specifications are used.
* Prepare documents to streamline the quality management system and check the compliance of activities as per ISO: 9001.
* Conduct and coordinate regular trainings to keep the workforce aware about the customer requirements.

2006-2007
Worked as QA/QC engineer in Reliance Refinery Expansion Project (JERP) employed by L&T ECC Division in which Bechtel is the EPC management contractor. In total, the project cost around $5.7 billion employing more than 90,000 people during construction, fabrication and installation of 109,170 metric tons of steel, about five million meters of varied size pipe, more than 4000 pieces of major equipment, and more than 110,000 isometrics
* Implicated in Coker Unit for the inspection of quality spearheading the team for swift completion of the project by May 2008. It involved AG, UG, Structural Tanks, Refractory and Exchangers Inspection for Quality as per Inspection and Test plan (ITP) and Bechtel France Specification

General responsibilities
* Monitor the 'Quality of Work' of all subcontractors.
* Supervising the execution of work in Mechanical, Welding (Piping & Storage Tanks), Painting, with a dedicated team of QA/QC technical assistants with Project Quality Plan.
* Verification of Tie-in / Hot Tap Tie-in works
* Verification of Hydro test packages / Mechanical completion Package / Inspection Record Books
* Conducting the activities like Welder's Qualification Tests, hydro testing, pneumatic testing etc.
* Monitor the Inspection and Test Status of construction activities of all Disciplines.
* Prepare Quality plan, Inspection Test Plan, WPS, PQR and WPQR as per client requirements.
* Monitor the Calibration of Inspection and Measuring Equipments.
* Guiding and trouble shooting day to day construction problems.
* Appraise the Client about the Quality of work with statistics.
* Monitor the inspection activities at vendor's premises with inspectors / Third Party agencies.
* Inspections of piping material identification as per Isometric drawings/ Material take off, before fabrication and co-coordinating with PMI Crew members.
* Follow up of all Non-conformance reports (NCR'S) to ensure closure.
* Resolving technical Queries with project management team (PMT) on daily basis.
* Coordinate with client's project inspection unit for necessary project inspection for witnessing/ hold points.

As a QA/QC Welding Inspector/Engineer
* Checking that the welding procedure to be used are approved and duly qualified as required.
* Verifying that the welders are qualified to the approved project WPS. Checking that only approved electrodes, filler wire, flux and gas are used.
* Supervision of the welding activities, checking in particular the adequacy of joints preparation, protection and provision in case of rain, wind, low temperature, etc.
* Inspection of welds, visual examination and test are carried out and documentation in accordance with "ITP" for site activities, verifying the inspection record and validating the relevant result.
* All the NDT offerings with respect to the material wise and Tie-in requirements and its interpretation of test results
* Checking the adequacy of equipment for pre-heating, welding, heat treatments and weld examination.
* Monitoring the performance and capability of each welder on the basis of radiograph inspection/test. Review of all procedure & other doc related in mechanical Welding/NDE aspect.
* Checking heat treatments for PWHT diagrams. Checking the correct measurements of hardness, when required, and the acceptability of the result.
* Filling/documentation and retaining of all NDT reports, heat treatments report and inspection reports. Informing QC Manager regarding the problems which require their decision. Checking welding parameters as per WPS required.
* Verifying the adequacy of the Quality Control Procedure. Checking that inspections and test are carried out and documented in accordance with the approved procedure and quality plans. Documentation/filling of all piping inspections records.
* Review of test packages clearance/ punch listing as per project specification as per system before hydrostatic testing prior to pre-commissioning. Assisting of commissioning works as per plant activities. I am trained by the Company for Minimizing the repair percentage and Rework.
* Inspection of piping pre-fabrication/erection as per ITP. Dimensional checking of piping as per approved isometric drawings. Line checking of piping, review of test packages, punch list carried out conforming to ISO, P&ID and project specification prior to test.
* Checking heat number on required piping traceability. Checking of pipe support pre-fabrication as per approved construction detail drawings. Checking of piping materials as per piping materials specification (PMS).
* Prepare punch list records to monitor the progress of works inclusive of balance of joints for testing. Prepare non-conformance reports for discrepancies encountered during inspection and as per project specifications. Updating QC documentation reports for filling. Reporting to QC Manager to discuss problems during inspection/surveillance.
* Responsible to review plan drawings to P&I Diagrams to prepare isometric drawing, material take-off, check material to be used as per specification and engineering standards. Supervise sub-contractor in fabrication and installation of pipe spools and pipe supports to assure quality.

2000 to 2001
Worked as a welding supervisor for S.K.S Engineering India Ltd which is into the production of engineering products catering to the needs of a wide range of industries.
* Planning and Scheduling.
* Maintains quality control procedure for the fabricated items
* Implementation of safety standards and maintain safety of the work force.
* Assign manpower for the installation work.
* Preparation of production reports
* Ensure materials as per drawings &specifications.
* Materials take off and listing.
* Check if the latest construction drawing are used
* Consult engineering problem with engineer
* Check and consult product delivery at site
* Check with work front and coordinate with other discipline
* Prepare daily and weekly report
* Perform official line check
* Perform back check of punch work
* Check and ensure piping test pack preparation is properly made
* Check and review of test pack prepared by subcontractor
* Coordinate and consult with subcontractor and other discipline concerning Testing
* Witness of piping pressure testing
* Check and ensure piping flushing and blowing preparation is properly made
* Perform piping reinstatement check

Professional Certifications
CWI from AWS; Certificate No: 09013821

LEVEL II CERTIFICATE - AMERICAN SOCIETY OF NON DESTRUCTIVE TESTING (ASNT)
In accordance with SNT – TC – 1A in
* Radiography testing.
* Ultrasonic testing.
* Magnetic Particle testing.
* Liquid Penetrant testing.

Functional Strengths
* Knowledge of codes like API 1104, ASME SEC V, ASME SEC IX, ASME SEC VIII, ASME B 31.3, AWS D 1.1, ASME B16.34, EN, DIN and ASTM Standards.
* Manage various key operations during glorious service in S.K.S, L&T& PEEKAY gaining insightful exposure of overall N.D.T, Welding Inspection, QA/QC procedures and its preparation, Destructive testing and various quality management functions.
* Drawn up detailed inspection plan for cost-benefit analysis to ascertain technical and commercial viability with accountability of getting the work executed as per the specifications.
* Contributed engineering inputs to define technical specifications of equipment required and describe the scope of work.
* Anchored shop floor activities and provided reinforcements wherever needed to ensure smooth work progress.
* Enacted realignments in strategies and contributed motivational strengths to ensure completion within defined time & quality parameters.
* Conceptualized and implemented cost reduction measures to control expenditure within budgetary provisions.
* Motivate & Train subordinates to generate performance levels of demand.

Personal Information:
Date of Birth: 18-MAY-1983.
Martial Status: Single
Languages Known: English, Hindi, Malayalam and Tamil

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1132)

Go to Search Parameters...

Brief Description

Unlicensed Engineer, Diesel Mechanic

Instrumentation supervisor - QP refinaries, Qatar

QA/QC Project Execution Engineer With more than 3 yrs of experience in construction industries

16 years experience as a Safety professional and Paramedic, NREMT-P, Texas EMT-P, Colorado EMT-P, ACLS, ITLS, PEPP, CPR

Project Manager, Business Systems Analyst, and Information Developer

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

My wish would be to integrate a team of safety, contractor or in the respective specialty . My family circumstances having found stability durable. The formation that I received in this field pushes me to gain this environment in which I smell myself much more at ease. Indeed, the hostile sec

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Supply Chain and Customer Service Manager - Looking for relocation in Australia or Africa.

A globally-certified procurement professional with extensive Asia-Pacific experience

LPG/LNG Operations - Bottling & Bulk Supply & Distribution, Project Management, Primavera & MS-Projects

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

Offshore Advanced Rigger,experianced,heavy lift,200t capt,AB seaman

Construction manager, laborer, Class A CDL Drivers license, mechanic

With over eight years of project management experience on seismic petroleum exploration surveys and submarine cable installations. Proven ability to work independently, to work closely with the client on site, and to supervise operations in diverse and difficult working environments

Maufacturing Automation

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

With 8 years of extensive management & engineering experience in construction field, I seek a senior management position which will allow me to utilize my experience at higher positions.

Electronics Engineer exp. in OPTICAL FIBRE , RF, WIRELESS, PROJECTS ROLLOUT

Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager

Welding Engineer

A diligent Civil Engineer with eight (8) years of Professional commitment to hard work in diverse role varying from Site Engineer, Project Engineer, Site Manager, and Construction Project Manager. A good team player, highly mobile and willing to be part of a result driven goal oriented team.

NACE Level II Certified Coating Inspector, Certified Welding inspector

Highly motivated individual with skills in Operation of Diesel Generator set (5x20MW), for Electrical projects in Designing, Estimation and Supervision of Industrial and high rise buildings.

Remote Paramedic, Firefighter, Paramedic

Dedicated, results-oriented, professional with the ability to manage projects and meet deadlines. Strong communications, customer service, and problem-solving skills. Successful in networking with individuals on all levels. Excellent organizational, multi-tasking and time management abilities.

Competent HSE Officer and registered with Department of Occupational Safety & Health Malaysia, Lead HSE MS Auditor with NCSB. Diploma in Occupational Safety & Health.

nvq level 3 in electrical installations, 17 th edition wiring regs, hv terminationsand splicing, supervisor experience

Commissioning of utilities in oil & gas plants and water treatment plants

Mechanical System Engineer

Mechanical engineer with extensive experience of over 13 years in contract administration, estimation, tendering, budgeting, cost control, billing variations, claims and arbitrations & project closing. Well-versed in procurement, installation and commissioning of electro-mechanical

Senior Document Controller. 9 years experience. Oil & Gas, pharmaceuticals, petrochemicals. Bachelor of Science in Electrical Engineering graduate. Using WebDMS. Electronic transmittals, document store, electronic issue of documents. ISO standards. Can lead Doc con group. Coordinate with Clients,

D.A.E. (Mechanical) 1970/3300 Second 1989

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

I wish to join a organization that can utilize my skills and training effectively that is commensurate with experience and qualifications and reward me accordingly. I am a well presented person and can take up new employment at short notice.

I am a Graduate in Mechanical Engineering with four years experinece in the field of Oil and Gas. Iam also a certified CWI by AWS and also got certification as Level-II in RT,UT,PT,MT.

Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate

Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering

Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab

Asst. Manager Systems with Skills like System admin, Network admin, Helpdesk Manager & MIS.

To work in a challenging and motivating environment where there are opportunities for the full and effective utilization of my skills and potentials and to showcase my God-given talents.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

Manager, Team leader, Computerized production management, International import-export, letters of credit, banking, assistant

To obtain a suitable position in pursuance of promising career where I can make use of skills and experience for the growth of the organization, in conjunction with recognition and encouragement for hard work and sincerity.

Around 20 years (around 8 years as lead) experience in all QA/QC activities up to final certification of equipment and piping including pre commissioning inspection in Oil & Gas (Production Platforms (Topsides), Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbui

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out