Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #86907
next resume »»
CONTACT INFORMATION:
Areas of Expertise Drill & Blast Consulting & Training
Shaft, Slope and Tunnel Development
Shaft, Slope and Tunnel Initial support and permanent lining.
Shaft and Tunnel Grout for water control and structural integrity
High and Low pressure Chemical and Cementatious grout
Smooth wall Blasting
Shotcrete and steel sets
Experience 2009-Present Hatch Mott Macdonald NY Lead Quality Engineer MTA East Side Access NY
Construction QA/QC management on The 8 billion dollar East Side Access subway construction project for New York City Metro Transit Authority. Manage 14 underground inspectors, two TBMs, two road-header and several drill & blast headings. Review blasting and ground support submittals for accuracy and constructability, assure Quality and Contract specifications are maintained. Act as public relations liaison to NYCT, MTA, NYFD, NYPD, and other agencies requesting tours of the project.
2008-May 2009 MANA Drill & Blast/MANA
CO Founder & President Special Projects
Multiple Projects Kennesaw GA
Exploration drilling on the Mullan Tunnel in Blossburg, MT.
Train and Supervise Core Drillers for Tunnel Projects.
Key personnel for Heartland Corridor Project HCCIPP FRA Certification Track maintenance and inspection.
2008-2008 Jacobs Associates San Francisco, CA
Chief Inspector Heartland Corridor Roderfield WV
Construction management inspection to insure quality control and contract specification requirements on a major Railway Tunnel retro-fit project with union workforce for Norfolk Southern. Duties include but not limited to Consulting with design and CM team to handle issues with possible methane gas in tunnel areas due to coal seams in overburden, collecting progress statistics, updating and monitoring daily reports and logs on contract progress of structural grouting, ground support and shotcrete placement. Opened my own company and had to quit due to conflicting contract position.
2004–2007 Delon Hampton & Associates Atlanta, GA
Chief Tunneling Inspector West Area CSO Atlanta Ga
Construction Management Chief Inspector for Drill and Blast Shafts and tunnels on a $250 million CSO project in Atlanta., Oversee and Direct 10 inspectors on 7 sites, 4 Construction Shafts 40' diameter 100' to 175' deep, 1 intake shaft 20' diameter 100' deep, 1 overflow shaft 20' diameter 100' deep and 1 Pump station shaft 75' diameter 125' deep including initial support both ringsteel and lagging and sheet piles, permanent lining and contact grouting. Several thousand feet of Drill and Blast Starter and tail tunnels, Overflow and connector tunnels Excavation, Lining and Grouting were monitored also to insure contract compliance through monitoring daily shift reports Compile records for weekly progress reports. Assure compliance of blasting requirements for city, state and federal regulations. Serve in unofficial Public Relations Liaison position for city of Atlanta to communities during blasting operations. Compile and maintain blast data. Assist resident engineer with daily and weekly progress reports.
1996–2004 Dynatec Mining Contractors Various Loc.
Mine Foreman / Blaster, Barrick Goldstrike Meikle Mine Elko NV
Drill, Blast, Excavate and Line a 1400' x 21' diameter shaft for gold mine production. Including permanent lining and steel installation for 4 compartments. Deepen the same shaft to 1750' while in production 2 years later. Line Install steel and commission shaft. Drive 3600' of Decline 30'x36' for haulage, develop an underground shop and office area 60'x1200'x40' including bridge crane and fire door installation and commissioning, excavate and line ore passes and storage bins across several mine levels, Excavate and develop Crusher station 80'x200'x80' including setup and commissioning of 200 TPH crusher. Shotcrete line all these areas 8000+ yards. Process time and material estimates for construction bids. Directed daily safety meetings.
Mine Foreman / Blaster, Barrick Goldstrike Rodeo Mine Elko NV
Drill, Blast, Excavate and Line a 1300' x 12' diameter shaft for aggregate storage. Included hoist and headframe setup.
Mine Foreman / Blaster Gassy Mine, FMC Corp Little America WY
Drill, Blast, Excavate and Line an 800' deep 20' diameter ventilation shaft for a Trona mine.
Lead man / Driller Cargill Salt Cleveland OH
Control water inflow in Production and service shafts of a Salt mine by drilling and injecting High pressure Chemical grout. Changed out hoist ropes on both production skips. Inspected and replaced guides and steel in both shafts.
1995–1996 Anglo Gold Elko, NV
Drill and Blast Specialist Foreman Murray Mine Elko NV
Train and Supervise drill and blast crew in an underground gold mine. Drill and blast bench and face rounds. Operate Atlas Copco and Tamrock jumbos, Tamrock Solo and Ingersoll Rand air track drills. Wagner 3.5 and 6 yard Muckers. Wagner and Dux Haul trucks. Power trucks and Scissor Lifts. Motor Graders. Boom trucks and Backhoes.
1991–1995 Tower Rock Stone Ste. Gen MO MO
Surface Driller Ste Genevieve and Scott City Mo
Drill and blast rock in both production and stripping areas in a surface limestone quarry. Operated Drilltech, Gardner Denver, Tamrock and Ingersoll Rand Air/Hydraulic and ITH Drills up to 6 ¾". Cat and Dresser Loaders up to 993c. Cat and Terex haul trucks up to 777. Skidsteer Loaders.
1989–1991 Cominco American Bixby, MO
Underground Equipment Operator
Build and maintain roadways in an underground Lead mine. Operated Cat and Komatsu Loaders up to 980. Cat and Galion Road Graders. Cat Articulating Haul Trucks. Various Drills and High explosives.
1987-1989 Mid-Continent Resources Carbondale, CO
Underground Lead Miner Red Stone Co
Started out as the Safety/First Responder. Moved into coal mining and Lead Man position quickly. Mine caught fire and closed down.
Education/Certifications
MSHA Surface and Underground Trainer
OSHA Construction and General Industry Trainer
ISEE Level I & II Blaster
Shot Firer Certification Colorado, Wyoming & Illinois
Mine Foreman Certification Wyoming & Illinois
BCOA Supervisor Certified
FRA 213 Railroad Track Inspection & Safety Standards Course
E-Rail Safe Certification
Seminar Boot Camp: Public Speaking Course
Affiliations Member ISEE, Cobb County Chamber of Commerce, St.Louis Chamber of Commerce and Veteran of the United States Air Force.
Additions
References: I have began to consult companies on Drilling, Blasting and Safety training and techniques for both surface and underground mining in all rock types. I bring over twenty years of mining experience and knowledge to the table that will be affective. I have expanded my field of expertise to the railway with the help of my colleague Gerry Millar and FRA training courses.
next resume »»
Search Results (Resumes 1 to 50 of 1130)
Go to Search Parameters...
Brief Description
Free!
Twenty five years of mining and construction experience in both surface and underground. Lead Quality Engineer for MTA East Side Access NYC. Chief Inspector for Construction Management on The Heartland Corridor Project in West Virginia. Chief Inspector for the city of Atlanta on the West Area CSO.
Free!
Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
My techanical abilities in the use of Primavera and my leadership skills may be of significant interest to you. Upon review of my qualifications I think you will find that I would be a very valuable member to your company.
Manager of milling department woodworking division, wood lamination, sawmill manager, lumber quality checker, logs scaler.
Maintenance Planner / Scheduler
Dedicated, creative individual with broad experience in project controls and project administration demonstrating interpersonal and organizational skills, with a proven ability to learn and adapt to change efficiently.
electrical/mechanical superintendent/ project manager
Electroplating and running chemical an run test on them and check qc on parts
For the past twenty two years I have pursued a career as a Linesman, acting principally as a team player with additional professional duties.
Thirteen years of problem solving, decision making, upward career progression and increasing responsibility. Extensive hands-on experience administering, planning and managing operations in the following functional areas: facilities management, project supervision, procurement, staff development, bu
Over 9+ years of experience in Portfolio management, Start stream TLM, Accounts, Operations & system automation.
Procurement & Contracts Expertise
Project Manager: Responsible of the coordination and execution of the following projects: • Warehouse Management System (Oracle WMS) • Overall Revision to the actual ACP Master Catalog . Inventory Re-engineering Program
I have worked many years in the construction field and I have knowledge of all aspects from ground breaking to completion.
Working field superintendent
-Has wide working knowledge and experience on automotive production line.
Cement Production Supervisor // Senior Cement Process Engineer //
Surface Sciences, Polymer Chemistry and Physics, UHV Techniques, Materials Sciences, Thin Film, Single Crystal.
Results orientated, hands on multitasked, multifunctional, dedicated manager. experienced in materials. Systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.
I am 46 years old, hardworking and trsupervision. Seeking permanent employment overseas. ie: Dubai.ustworthy. My attendance is 100%, never having had any sick time from my work in 25 years of full time employment. I can use my own initiative, and am able to work without supervision.
Experienced General Manager with Emphasis on Sales and Operations
heavy equipment mechanic
• Perspective gained through advancement from field operations, through front-line supervision to senior staff management and administrative positions.
Executive Director, Operation In Charge, Managing Director
Free!
Experienced Project Manager, Divisional Manager, with a proven track record of success in Construction, Interiors and Finishing works. MEng Degree Mechanical Engineering, ILM level 5 Diploma in Management,CITB Appointed Persons.IOSHI Certified.B S Construction Health and Safety
Safety Management Position
Operate a machine on a assembly line, especially operate a automatic welding machine.
Civil engineering design consultant and project management professional
27 year veteran contracts manager , civils and epc specialist
Remote Site Expert : Global Experience.
Project engineering which involves inspection of instruments like control valves, on off valves, valve actuators, various type of analyzers etc.
Senior executive with 17 years experience with MEP, design build, G .C., PM firms and owners side construction. New business operations, new division creation with demonstrated success in entrepreneurial environments. Projects consisting of ground up construction, renovations, commercial
I have been working in Kingdom of Saudi Arabia FOR 18 years as grader operator. And now i want to work in Canada as grader operator.
Mechanical Engineer 22 years experience design, projects
10 years experience 7 years in paksitan & 3 years in dubai & i have the bachlor of arts degree & some diplomas in health safety & envoirnments.
Experience Surveyor
Executive Management level experience and expertise
Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche
Extensive experience in the construction industry in the field of architectural and civil/structural works of residenses, townhouses, condominiums and commercial buildings including interior and exterior finishing details. A highly motivated project supervisor, proven ability to solve site problems.
Looking for growth
31 yrs. old, 13 yrs heavy equipment accident free operation including all dozers, graders, scrapers, etc etc. Currently mainline hoe operator (345bl) thousands of hours roadbuilding, loading trucks and laying pipe. Extensive experience with gps and laser grade systems. Ability to cut grade.
HSE
Diploma in Civil Engineering (3 Years)
Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant
as per attached
June 2003 ©¦EPresent Company: JGC Corp Location: China Position : Schedule Controller May 2002 ¨C March 2003 Company: FAFCO Location: Saudi Arabia Position : Planning & Scheduling Engineer
35 continuous years of national and international commercial construction experience
Experienced in power plant operations and startup.
Geodesist/Land Surveyor/Geomatics/GIS consultant
Power Generation- Twenty-eight years experience of Construction, Startup & Commissioning, Operations & Training for Combined Cycle Units, Coal Fired and Nuclear Steam Supply Systems (NSSS) & Balance of Plant (BOP) Systems as Lead Mechanical, Lead I&C, Lead Operations and Startup Plant Manager.
[ 1 ]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Seach Parameters
Change search parameters...
CATEGORIES:
Operations;
INDUSTRIES:
Construction;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com