Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #22781 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE: Rig mechanic / supervisor

HIGHLIGHTS OF ABILITIES:
Strong practical and theoretical foundation in drilling, work over and service RIG/BARGES, Process/Utilities platform, Offshore Complex, Wellheads, Pipe Laying and Accommodation maintenance.

Excellent O&M, repairs and overhauling skills. Proven success in evolving creative solutions to various technical problems of Offshore / onshore Oil & Gas Equipment/machinery.

PROFESSIONAL EXPERIENCE:
I. MB Petroleum Services, Muscat (Oman) as Rig
Mechanic since 1998:

Duties involved: Routine maint, Overhaul, Breakdown repairs, preventive maintenance and log book work of scheduled maintenance plan.

Professional expertise: Production related maintenance Jobs on mobile land rigs such as Kremco, Ideco, Wilson, Shroeddar for Rig Carrier Draw works, Rig move, Fleet and Caravan Maintenance, Mud-Pumps and Brine Plants (Gardner Denver, National and SPM) BOP and accumulator repairs & calibration, tongs, compressors and power–generators up-keeping, valves and trees such as OTECO, SPM, FMC and WOODGROUP, BARKSDALE etc.

Projects Executed at:
- All PDO north & South Oman fields
- Occidental of Oman – All fields
- ELF Oman (Petrogas) Sahama Field
- Japex Oman Daleel field.
- Capping up of Zauliyah-16 blowout well with WILDWELLCONTROL USA Engineers
II. National Petroleum Construction Co., Abudhabi, UAE. Mechanical Technician Gr.'I' – Offshore: 1991-1998.

Routine maintenance, overhaul, breakdown – repair, preventive – maintenance, operation, alignment, installation, commissioning, start-up, hook-up, pipe laying, testing, pigging, piling & log works on Oil & Gas pipe-lay Barges, Offshore Complex and lifting ships (2000 Tons).

Professional Expertise: DCS related Production & maintenace jobs on GEC ALSTHOM European Gas Turbines 4.5 MW, GEC Sea Water pumps, Sulzer Fire Pumps, Manitex Tower Cranes, Peroni HP Pumps, Veronesi, Alfalavel Fuel purifiers, MECO & Aquachem Freshwater Makers, Cumins emergency generators, Liferaft boats, colesers, Valves, Heat exchangers, Hydrants, Methanol, Clycol, Nitrogen, Chemical Packages, Well-heads and all associated Rotating Equipments, compressors or Static equipments, Engines: CAT, GM, Deutz, Cummins, Winches and Hamworthy Sewage Treatment Plants, American Floating Cranes, Merck hammers

Projects Executed / Assigned / Achievements:
- NPCC – TPG Joint Venture, QLGC, Qatargas Upstream development P/U platform Top Sides – Precommissioning & contractors start-up assistance and punch list at North Bravo Field.
- MEARSK-OIL QATAR'S Al – Shaheen Field Pipe Laying, PLEMS & Decks.
- ENRON-OIL & GAS INDIA LTD., TAPI & PANNA Field, Pipe-laying, testing, complex hook-up.
- DAS-ISLAND to ZIRKU-10" Pipe Line Testing.
- ZCSC COMPLEX (Zadco + Adma-Opco) maintenance.
- Dubai-Drydocks – DLB-750 Dry docking
- Aramco North Fields – Pipe line Testing with Hydratight and Halliburton Equipment & Machinery.
- I.O.O.C, IRAN Pipe laying at Kharg Island.
- Al-Mukalla Yemen 30" pipe laying.
- ONGC Bombay High – ICP SAND 113 Kms Automatic Pipe laying.
- ASRY – Bahrain – DLB 1000 – Drydocking
- L & T Bombay High – Complex Maintenance are a few.
- Replacement of 2000 Ton Crane 5 Nos. swing rail tracks

III. Naval Dockyard – Visakhapatnam – India – 1977- 91. Highly Skilled Technician – 14 years.

- Repairs, overhauling & maintenance of all types of diesel engines on ships, sub-marines and petrol boal O&M of all rotating & static equipment / machinery in yard utilities department such as cranes, fork-lifts, generators, compressors and gas turbines etc. Worked with Petroleum, Oils and Lubricants pumping terminal jobs, Log returns, schedules, procurement and planned preventive maintenance tasks.

EDUCATION: AMIAE
Associate Member of the Institute of Automotive Engineers (INDIA) – 1979 (Accredited by SAE – USA).

EME
Electrical & Mechanical Engineers (INDIA) Army Trade Diploma – 1989.

I.T.I.
N.C.T.V.T. & N.A.C in Motor Mechanic – 1975
Industrial Training Institute, Kakinada.

Intermediate
Intermediate Science, M.S.N. Jr. College, Kakinada.

S.S.C
Secondary School Certificate, Municipal High School, Kakinada.

Other Interests / Commendations:
- Participated twice in Himalayan Car Rally 1986-87
- English Speed Typewriting.
- Commendations for Best of Work – 1979,82,86,87

Safety Trainings: Enhanced site supervision, Basic Safety engineering,
H2S & BA donning, Fire Fighting, First Aid and Sea – Survival.

AVAILABILITY IN INDIA: 10-10-06 to 06-11-06

View contact information...
«« previous resume next resume »»
Search Results (Resumes 551 to 600 of 1094)Go to Search Parameters...
Brief Description
•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India
A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.
Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.
Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,
Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.
29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.
Highlight: Thirty-Six Years Continued Experience in the petro-chemical, power generation, mining and commercial industrial sectors, working with several major companies at various levels of responsibility in the procurement/supply/distribution/and management of materials.
Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.
To obtain a challenging position that utilizes proven experience and skills.
E&I QC Inspector
Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman
Mechanic/Welder Field, shop, underground
Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.
laboratory, mechanical, electrical, computer, supervisory and leadership skils
I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro
For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations
Paramedic with 22 years experience in emergency care , Remote Site Medic certified, ACLS Provider, BLS Instructor, HSE Safety Coordinator, Divemaster/Rescue Diver. Work experience includes managing muti national task force in middle east, and provision of clinical care in south asia remote sites
I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol
A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.
Project maintenance manager/planner/trainer
Complete Facility Maintenance
I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.
Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati
Primavera 6 certified planner
Communicator, negotiator, manager, natural leader
20+ years in culinary field,client pleaser,professional with a sense of humor
IT PROJECT MANAGEMENT
Logistics Manager, Rig Manager, Materials Manager
Manager / Engineer ( HW / SW / QA / Training )
Working on projects for various E&P Companies and Contractors
To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;
IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).
African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan
Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction
Africa specialist - 25 years Africa experience, 16 years work experience, general management (production, materials, logistics and international transport fields), 14 of which are at managerial level, the last 11 years being spent as an expat in West Africa and West-Central Africa.
Qualifications: S.S.C., Intermediate, NCTVT - Vocational Diploma In Motor Mech, A.M.I.A.E. (India, Auto Engg).
Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word
9 Yrs Experience in Oil & Gas Estimation, Civil Construction, Architectural Facades, Construction Chemicals.
Cad design, cnc machine operation, electrician residential, commercial and power company
Cad Operator
audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.
I am an experienced welder/fitter.
Electrical Eng./Supervisor - Power Plant
MAINTENANCE ENGINEER, GAS TURBINE, FITTER
QA/QC welding isnpetion experience on US & overseas projects. CWI, Level II MT, UT, PT, RT film interpretation
A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management
I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)
Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.
MIG) Gas Metal Arc Welding, (TIG) Gas Tungsten Arc Welding, (SMAW) Shielded Metal Arc Welding “Stick”, OXY-ACETALENE Welding and cutting. I have also been trained in Pipe Welding, and have an extensive knowledge of Ferrous and Non-Ferrous metals along with numerous skills in metal fabrication.
over 14 years of Quality Control and Assurance within the Construction and Facilities Maintenance field. Providing leadership and Quality Control in a variety of New and or expanding projects ranging from military and civilian aircraft runways, slip form, facilities maintenance, and industrial plant
1   2   3   4   5   6   7   8   9   10   11   [ 12 ]   13   14   15   16   17   18   19   20   21   22  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com