Resume - CSWIP Senior Welding Inspector

Misco Jobs

Resume #32596

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

Ultrasonic Testing, 1995
Certificate No. 127/UT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Magnetic Particle Testing, 1995
Certificate No. 127/MT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Ultrasonic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Radiographic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Magnetic Particle Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Liquid Penetrant Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

OBJECTIVE:
Growth Potential and career advancement which could benefit the company and myself

WORK EXPERIENCE:

McDERMOTT CASPIAN CONTRACTORS, INC.
Baku, Azerbaijan
July 17, 2003 – September, 2004
Senior Inspector (QC/NDT) A

Azerbaijan Int'l Oil Co.(AIOC)/British Petroleum (BP) Azeri Pipeline Project

Monitored front end activities of the pipelaying of 30 inch and 28 inch pipeline in offshore Baku, Azerbaijan (Azeri Phase 1) on the Caspian Sea including beach pulls were completed for the two lines onboard Pipelay Barge Israfil Guseinov and fabrication of Subsea Spools onshore. Involved in the Welding Procedure Qualification for Azeri Phase 2 Pipeline.

VELOSI / SARAWAK SHELL BERHAD
Miri, Sarawak, Malaysia
August 20, 2001 – October 7, 2002
Senior Engineering Surveyor/Senior Welding Inspector

M1 Platform Hook-UP Expansion Project

Worked as a Senior Welding Inspector on M1 Platform Expansion which involves the strengthening of the 100 meter bridge connecting the Production and Living Quarters Platform to the Riser (drilling) Platform, installation of Extension Panels on both platforms and installation of new piping systems.

Jintan Field Development Project
Involved from the formulation of the proposed Welding Procedure Specification (pWPS), Welding Procedure Qualification Test (WPQT), Welding Procedure Qualification Record (WPQR) and the Welding Procedure Specification (WPS), Welder's Qualification Testing (WQT), review of all pertinent documentation prior to the installation and during the installation stages of the projects.

E11R-B Platform
The work scope consist of installing a 32 inch riser with a external monel coated pipe at the splash zone area

JNDR-A & M1DR-A Platforms in offshore Sarawak area.
The work scope consists of installing a 7.634 km x 24 inch API 5L X65 grade carbon steel pipeline with a internal clad 4mm AISI 316L grade stainless steel between the JNDR-A to M1DR-A installation including risers and expansion spool.
M4 &F23SW Platforms in offshore Sarawak area
The work consists of two gas lines, a 12inch X 7 kilometers and a 14 inch X 10 kilometers, both are internally cladded with 3mm 316L stainless steel including installation of risers, expansion spool and PLEM.
- Witnessed the Welding Procedure Qualification Testing at the Serimer Dasa, Mitry Mory, France Welding Workshop, including the mechanical testing at the Institut De Soudure in France.
- Witnessed the Welder's Qualification Testing at Akra workshop in Seremban, Malaysia and onboard the pipelaying barges (DLB 264 & Kuroshio 2)
- Witnessed the Mechanical Testing of the Manual welding Procedure Qualification at PTS in Singapore.
- Reviewed of QC documentation prior to commencement of the projects.
- Monitored pipelaying activities on board the pipelaying barges.

ANDISON INDUSTRIAL SALES, INC. (Marketing and Sales Department)
Diego Silang St., Batangas City, Philippines
May 1999 to July 2001

VELOSI / SHELL PHILIPPINES EXPLORATION B. V. (Onboard PLV SOLITAIRE)
Alabang, Muntilupa City, Philippines
June 2000 to January 2001
Welding Inspector/Quality Surveyor

Shell Philippines Exploration B. V. is one of the proponents for the development of the Palawan Malampaya Natural Gas Project, it is the largest natural gas find in the Philippines to date and is expected to be on stream by the later part of 2001 and is estimated to produce 2,700MW power from the 3 Power Plants of Sta. Rita, San Lorenzo and Ilijan all in Batangas. The project is estimated to cost US$ 4.5B.

The project will deliver deep water natural gas to power plants onshore via two 30 kilometers, 16 inch inconel internally cladded pipelines thru a platform and thru a 504 kilometers, 24 inch pipeline.
- Maintained awareness of relevant Quality, Health and Safety Engineers requirements which includes proper housekeeping.
- Monitored the pipelaying and other related activities onboard PLV SOLITAIRE, which is a dynamic positional vessel capable of laying more than 7 kilometers of pipeline in a 24 hours period.
- Carried out and documented the visual examination of welding activities as to the conformance or non-conformance with approved standards and criterions.
- Monitored the Qualifications and Testing of other items related to the project.

THERMAL ARC PHILIPPINES, INC (Marketing and Sales Department)
Pelbel Building, 2019 Shaw Boulevard, Pasig City, Metro Manila, Philippines
April 1997 to September 1998

SAIPEM AG / EUROPEAN MARINE CONTRACTORS, LTD (QA/QC Department)
Badenestrasse 15, 8004 Zurich, Switzerland
March 1992 to December 1996
QA/QC Engineer

Worked onboard laybarges Castoro 6, Castoro 2 and SEMAC 1 in the North Sea, Mediterranean Sea, Gibraltar Strait and Irish Channel.

List and location of some of the projects I have worked

ROYAL DUTCH SHELL - North Sea
STATOIL - North Sea
CONOCO - North Sea
TOTAL PETROLEUM - North Sea
RANGER - North Sea
TRANSMED - Mediterranean Sea
NORSKE HYDRO - North Sea
BRITISH PETROLEUM - North Sea
CLYDE PETROLEUM - North Sea
BROKEN HILL PROPRIETARY(BHP) - North Sea
BRITISH GAS - Irish Channel
EUROMAGHREB - Gibraltar Strait

- Maintained awareness of relevant QHSE system requirements.
- Monitored welding operations thru visual inspections upon completion of welding and during repair.
- Reviewed, familiarized and identified all areas of responsibility contained within European Marine Contractors, Ltd. (EMC) quality plans, procedures and relevant client specifications.
- Carried out and documented inspections of welding, including:
- Fit-up, consumable storage/usage and pipe cleaning.
- Observance of welding parameters, reporting adverse trends to production personnel.
- Verified that welders and consumables are qualified/approved for the process.
- Verified weld repairs in accordance with the qualified weld procedure specification (WPS).
- Identified and reported nonconformity.
- Ensured all NonDestructive Testing (NDT) equipment including probes and calibration blocks, etc., is maintained in good working conditions at all times.
- Performed and documented pipe-end NDT (Ultrasonic Testing (UT) and Magnetic Particle Inspection (MPI) for lamination checks following cut-out and prior to re-welding) and informed the appropriate supervisor of the results. Examinations are reported on the correct proforma and presented to QC Supervisor.
- Additional duties within own experience and capability as directed by the QC supervisor.

ENGINEERING & CONSTRUCTION CORPORATION OF ASIA (Industrial Services Department)
Benpres Building, Exchange Road, Pasig City, Metro Manila, Philippines
June 1996 to March 1992
Manager-Industrial Services Department (ISD) (1987 – 1992)

ISD is the Quality Control Quality Assurance Department and is a profit center thus it must earn its revenue by delivering services to the construction department of the Company and to other companies that required its services. The Department is offering all methods of Non-Destructive Testing, Visual Examination and Post Weld Heat Treatment including Preheating Services.
- Managed 15 professionals including supervisors, a warehouseman and a department secretary.
- Was responsible for the Marketing of offered services to various companies including the three largest oil companies, power generators and large construction firms.
- Sustained the needed operating expenses of the Department and contributed largely to the overhead of the Company.

Head-Nondestructive Testing Group (1986 – 1987)
- Managed 10 professionals composed of engineers and technicians in the operations of the group.
- Conducted trainings and seminar to various companies and individuals seeking knowledge of the different aspects of Non-Destructive Testing, which was a revenue generating activity for the Company.
Note: I was seconded to ALKHAJA COOPERHEAT from FIRST HOLDINGS INTERNATIONAL, INC. then transferred to ENGINEERING CONSTRUCTION CORPORATION OF ASIA, the latter two being sister companies.

ALKHAJA COOPERHEAT (NDT Department)
United Arab Emirates
The Sultanate of Oman
April 1985 to April 1986

Administrative Assistant/NDT Inspector (1985 – 1986)
- Performed Non Destructive Testing, i.e. Radiographic, Magnetic, Dye Penetrant and Ultrasonic Testing activities to different clients all over the United Arab Emirates and the Sultanate of Oman
- Prepared the necessary reports and evaluation of the test results
- Maintained and repaired Non Destructive Testing equipment

FIRST HOLDINGS INTERNATIONAL, INC. (Skills Training Center)
7232 Malugay St., Makati City, Philippines
June 1983 to May 1986

Administrative Assistant (1983 – 1985)
The training center has several trainors in the field of Pipefitting, Heat and Ventilation Air Conditioning (HVAC), Welding, Insulation, Electrical and Plumbing.
- Supervised five professional office workers made up of secretaries, clerks, a messenger and a warehouseman.
- Attended meetings with the staff of the Vice President of the Company.
- Prepared all letters and memoranda of the office.

WELLTRADE (Saudi Arabia) LTD (NDT Department)
Mansour St., Al Khobar, Kingdom of Saudi Arabia
January 1982 to March 1983

Senior Radiographic Testing Technician
Reported to the General Foreman.
- Supervise 10 technicians and engineers in the performance of Radiographic Testing in the eastern provinces of the Kingdom of Saudi Arabia
- Performed Radiography on other special projects as required by the Company
- Trained technicians and engineers on the proper safety procedures and operations of Radiography equipment.
- Prepared reports and timesheets for billing purposes clients.

Industrial Inspection (International) INC (NDT & Branches Division)
Pasong Tamo St., Makati City, Philippines
October 1980 to November 1981

Radiographer/Technical Assistant & Training Officer
- Performed Radiographic Testing all over the Philippines.
- Prepared documentation and reports on the results of tests evaluation.
- Led other technicians in the performance of their job.
- Acted as the Radiological Health and Safety Officer of the Company as certified by the Course and Examination given by Philippine Atomic Energy Commission (PNRI now), which I was fifth of the class.
- Trained new employees in the basics of Radiography and safety in the performance of their work.
- Assisted the Division Manager in the preparation of technical matters.

EDUCATION & CERTIFICATION:

Bachelor Of Science in Mechanical Engineering, 1980
Mapua Institute of Technology, Muralla St., Intramuros, Manila, Philippines

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1021)

Go to Search Parameters...

Brief Description

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

9 years operating cranes (stevedoring); 1 year marine construction

I am a welder I can weld arc mig stainless steel tig... ace torch plasma cutter

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

15 years of broad based management experience in diverse development projects. Experienced in planning, execution, monitoring, training, consultative, information dissemination, research analytical and evaluative services in project implementation. Recognized as a gutsy, hardworking and dependable t

I am a journeyman plumber/gasfitter with 22 years experience, with 5 years experience as a facilities maintenance planner. I am looking for variety in my field of experience.

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

Rigging & Heavy Lifting, Computer,Autocad.Microsoft Office Spread Sheets.

Crane Operator/Heavy Equipment Opertor

My experience as an Electrician with Trade school and different drilling company for over twelve years it has prepared me well for the job I saw listed on Misco jobs

India if any suitable post for me sent mail

electrician ph.770-969-8211

Experienced equipment operator, mechanic, welder looking for a good company that appreciates skill and commitment.

Pipefitter/Welder with over 10 years experience

Lead Instrumentation Technician

Extensive engineering career featuring over 17 year’s experience. Proven ability to deliver innovative solutions that serve corporate objects, Project Planning, Project Engineering (Instrumentation), Implementation, Construction, Commissioning, startup and process monitoring Petroleum/O&G projects.

Have experience working construction, laborer, dealing with people, and dependable.

I am a qualified Heavy Duty Vehicles driver, Crane Operator as well as a mechanic. I have a vast eperience of 21 years in managing heavy equipments including cranes, Trucks, Trawlers and Bull-Dozers. I had been working working as a workshop incharge in UAE Armed Forces.

boilermaker with fitting and welding experience in mining ,construction and hydraulics

Senior Executive Manager of Operations, Project Manager, Superintendent of Construction

Business Development, Marketing, General Management - Project and Product ( Chemical Engineer + PG Diplima in Export Marketing)

20+ yrs experience surface and DTH

I am a second year electrician. I am legally allowed to work in Canada and the United States. I am looking for work in oil, gas, construction, mining.

Driver, heavy equipment transport, water well rigs(Schramm Rotory) Matinance Michanic, Road construction,

CAD Designer Project Manager Medical Laboratory HVAC Piping Design JCAHO ASHRE

I am woking as Dcoment controller in an International Construction company for the last Two years.

Advanced air diver, subsea construction, wet welding, all aspects of construction, top notch employee.

With 15 years ex-pat experience, I am a well liked individual who can come into any situation and be a team player. Terrific people skills are an asset, which I possess. Welder/ fabrication and repairing heavy equipment from the frozen vastness of Antarctica to Greenland, along with Qatar.

i have 30 years experience in construction,mechanical as a business owner,supervisor,etc,

EXPERIENCED HEALTH/MEDICAL PHYSICIST-ENGINEER-SCIENTIST

Safety Director

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

Diploma or ITI holder who have worked in the maintenance, repairs of Cranes, Tower Cranes

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

Free! „X Continually ascertain and adjust operating parameters regarding more than 375 on-base diesel generators.

Years of experience in security and operation of heavy equipment and all types of motorized equipment

Talented and accomplished in construction background in numerous building, renovation sitesProven ability to carry out some aspect of a project including, scheduling, estimating, site supervision, and consistent of completing projects on time. Familiar with framing, some knowledge of plumbing,

Electrical Installation and Management

I'm looking for a unique job opertunity where i can show what I'm made of and learn as much as possible. I've been to a few shops and have learned alot but have not found quite what i'm looking for. I'm willing to travel or even relocate for the right job

I am a highly skilled, fast, safe and hard working heavy equipment operator.

Construction/Maintenance Superintndent, Mechanical/Civil fields

Experienced Construction Project Management Electrical Engineer/Staff

Mechanic, welder/machinist

i'm a ceritified tower crane operator been in this job for almost 2 years. also got crawler crane competency certificate. fast learner and friendly.

CSWIP Senior Welding Inspector

Deep knowledge in motor engines and auto-eletrical , eletronic Injection , and etc. I've got trade qualification as mechanic and deep background.

I&C Technician with broad experience

Electrician, Air Conditioning & Refrigeration Mechanic with Industrial, Commercial and Residencial Experience, Currently working for an Industrial Switchgear and Automation specialist in the Electrical Industry as a sales engineer.

Instrument Engineer / Supt

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out