Resume - Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD ...

Misco Jobs

Resume #33885

CONTACT INFORMATION:
View contact information...

EDUCATIONAL BACKGROUND:
College: Bicol University - College of Engineering, Legaspi City
Bachelor of Science in Civil Engineering
June, 1984 to March, 1986
June, 1987 to March 24, 1990
Honors Achieved: Scholastic Achievement (1984 – 1990)
Scholarship Grant: State Scholarship (1984 – 1990)

High School: Masbate National Comprehensive High School, Masbate
June, 1980 to March 29, 1984
Scholarship Grant: Cocofed Scholarship (1980 – 1984)

Elementary School: Amancio Aguilar Elementary School, Masbate
June, 1974 to March 21, 1980

SEMINARS/TRAININGS:

Safety Orientation Seminar: Alcatel Phils. Inc., Candelaria Office
Digitel GSM 1800 Project Maharlika H-way, Candelaria, Quezon
January 9, 2002
Basic Life Support Training (Adult): Philippine National Red Cross
Rizal Chapter, Pasig City
November 7-8, 2001 (12 Hours)
First Aid Training (basic): Philippine National Red Cross
Rizal Chapter, Pasig City
November 5-8, 2001 (32 Hours)
STAAD – III ver. 23: Microcadd Tech. Co., Manila, Phils.
12 Feb. – 18 March 2000 (33 Hours)
AutoCAD 2000 upgrade course: Microcadd Tech. Co., Manila, Phils.
26 Feb. – 18 March 2000 (16 Hours )

Supervisor Leadership Workshop: Lucent Technologies, Saudi Arabia
26 March 1998 (4 Hours)
Think Safety Driving system: Lucent Technologies, Saudi Arabia
15 December 1997 (4 Hours)
Autocad Rel. 13 Training Course: Microcadd Tech. Co., Manila, Phils.
10 March to 07 May 1997 (70 Hours)
Paint Technology Seminar: Dutch Boy Philippines Inc., Makati, Phils.
25 July 1993 (12 Hours)
Intro. To Construction Mgt.: E. Ganzon Inc., Makati, Phils.
EGI Homes III – Conference Room
15 March to 29 April 1993
Geothermal Energy Utilization
And Technology: Bicol University, Legaspi City, Phils.
22 February 1990

RELATED SKILLS:

Registered Civil Engineer (Professional License No. 0062960 Phils.)
Licensed Professional Driver (with valid Driver's license in Saudi Arabia)
Computer Literate (Microsoft Word, Excel, etc., Computer aided structural design)
Registered Autocad Operator (Autocad Release 14 and 2000)
Drafting and Design (Manual)

PROFESSIONAL EXAMINATIONS:
Career Service Professioal - 08 December 1991, Legaspi City, Phils. - PASSED
Civil Engineering Board - 25-26 May 1991, Manila, Phils. - PASSED
Career Service Sub-Prof. - 26 July 1987, Legaspi City, Phils. - PASSED

PROFESSIONAL EXPERIENCE:
June 10, 2004 to August 31, 2005
Alan Dick (Phils.) Corp.
21st Floor Raffles Corporate Center
Emerald Ave, Ortigas Center
Pasig City, Manila, Philippines
Site Engineer

DUTIES AND RESPONSIBILITIES:
Reports directly to the Project Manager
Responsible for the inspection of the sub-contractors site works both civil/structural and electrical.
Responsible for the documentation of site accidents reports, deficiencies, and/or cause of delay reports and ensures that the contractor is implementing health and safety plans on site.
Responsible for the checking and testing of the materials being brought in at the site.
Liaise with client representatives.
Supervises cylinder make up for comprehensive strength test on concrete.
Responsible for the documentation of daily and weekly site status reports, material discripancy report and weekly receipts to be submitted to the Project Manager.
Perform other duties as may be assigned and requested from time to time of the immediate head or any authorized Senior Management in the absence of the immediate head.

October 1, 2001 to December 31, 2003
ALCATEL Philippines Inc.
2270 Don Chino Roces Ave. Ext.
Makati City, Manila, Philippines
Civil Works Inspector

Duties and Responsibilities:
Reports directly to the Area Manager
Responsible for the inspection of the sub-contractors site works both civil/structural and electrical.
Responsible for the documentation of site accidents reports, deficiencies, and/or cause of delay reports and ensures that the contractor is implementing health and safety plans on site.
Responsible for the checking and testing of the materials being brought in at the site.
Liaise with client representatives.
Supervises cylinder make up for comprehensive strength test on concrete.
Responsible for the documentation of daily and weekly site reports, vehicle logbook report and weekly receipts to be submitted to the Area Manager.
Perform other duties as may be assigned and requested from time to time of the immediate head or any authorized Senior Management in absence of the immediate head.

October 18, 2000 to September 7, 2001
NOKIA Philippines Inc.
26th Floor Trident Towers, Makati Phils.
Construction Supervisor

Duties and Responsibilities:
To implement and to complete the assigned projects within the specific schedules, costs and quality. ( Construction of Cabins and other support facilities, erection of towers and site development works for cell and transmission sites. )
To ensure Quality inspection of Towers and it's facilities
To implement Construction Management:
a. Material sampling b.Periodic Inspection c. Close coordination with Contractors to meet specific schedules
To oversee the construction of the projects to be turned-over to the customer as per the specified schedule, cost and quality.
a. The role is critical considering the commitment to the roll-out of the project b. Delivery must be on schedule c. The cost must be within the budget
To implement Quality assurance from the contractor and end-user
To closely monitor Construction Schedule to meet the deadlines
To be able to cope-up negative slippage on schedules
To ensure that all works has to be accurate as per the specificatons and drawings, and within schedule to avoid delays and comply the commitment with NTC.

December 10, 1997 to Decemder 31, 1999
Lucent Technologies International Inc., KSA
GSM Telecommunication Expansion Project – Civils Dept.
Western Region, Jeddah, Kingdom of Saudi Arabia
Area Supervisor/Civil Inspector

Duties and Responsibilities:
Responsible for the pre-planning sketches of site layouts, elctrical panel locations, BTS eqp't. location, grounding layout and proposed antenna supports.
Assigns and delegates Civil Works Inspectors and Electrical Inspectors their respective site assignments discuss with them their duties & responsibilities.
Plans and evaluate day-to-day schedules and commitments to the client.
Monitoring and inspection of all on-going GSM construction to ensure the Contractor's implementation of work is in accordance with the existing Construction Drawings and Specifications with the approval of a certified quality control officer.
Implement Sanitation and Safety Practice on all GSM contruction areas.
Responsible for the schedule of deliveries of GSM Equipment Cabins and Towers.
Attend to Contractor's weekly meeting and discuss with the Supervisors any construction blocking issues.
Coordinate with the Local Government the necessary documents required for the Permits and access to the proposed site.
Coordinate with other department regarding contruction and implementation issues for GSM Project.
Prepare documentation for daily accomplishment report to be submitted to the Area Manager.
Responsible for the Site Documentations Folders containing Permits, Notice To Proceed, Soil Test Report, Pre and Post Construction Testing Reports and Approved Drawings.
Schedules and initiate Site Hand-over to client representative.
Review and verify all Bill of Quantities of each hand-overed sites and subsequently recommend approval for payment.

August 20, 1997 to December 15, 1997
Amalgamated Project Management Inc., Makati City, Philippines
Assistant Project Manager

Duties and Responsibilities:
Supervise the contruction works to ensure that implementation is in accordance with the specific drawings and specifications.
To emphasize proper engineering practice is being observed by the contractors.
Coordinate with all Engineer In-charge in all dicipline for any construction issues.
Monitor every phase of activities and ensure that construction schedules are being observed.
Responsible for the planning, implementation and monitoring of the following department funtions: Material Purchasing, Equipment Utilization and manpower hiring.
Conduct daily meeting with site engineers and foremen to monitor project accomplishment.

September 18, 1995 to May 30, 1997
Royal Desert Holdings Inc., 784 Edsa, Quezon City, Phils.
Project-In-Charge

Duties and Responsibilities:
To ensure that the contractor complies with the plans, specification and other contract documents and assures that workmanship is in accordance with sound and accepted construction practices.
Keeping of records and contract documents.
Conduct on-site observations and check the quality of the work, materials and equipment for consistency with the contract documents.
Inspect safety measures taken by the contractor.
Review and verify nature, quantities and contractor's prices on change orders/emergency/extra works being claimed by the contractors.
Review with all concern the requisition for payments as submitted by the contractor and forward them with recommendation to the owner for disposition.

June 5,1995 to September 15, 1995
D. M. CONSUNJI, Inc., 1851 Pres. Quirino Ave., Pandacan, Manila Phils.
Field Civil Engineer

Duties and Responsibilities:
Review and verify plans and details of structural and architectural plans prior to implementation.
Inspects installed rebars if it conforms with the structural plans and details prior to formwork enclosure.
Supervise installation and inspects stability of formworks for structural members.
Monitor and evaluate cost of labor and materials compared with accomplishments to check if it is still within the estimated budget of the project.

May 10, 1993 to June 1,1995
E. GANZON Inc., EGI Rufino Plaza, Taft Ave. cor. Sen. Gil Puyat Ave.
Pasay City, Phils.
Field Civil Engineer

Duties and Responsibilities:
Review and verify details of structural and architectural plans prior to emplementation.
Checks lay-out of grade lines and elevation reference at every level of a multi-storey building.
Inspects installed rebars if it conform with the structural plans and details prior to formwork enclosure.
Supervise installation and inspect stability of formworks for structural and non-structural members.
Design and estimate formwork system for structural and non-structural members of the building.
Supervise site operations (i.e. tower crane erection, laying out of grade lines and formwork installation ) to ensure proper executionof every activity in accordance with the approved plans and details.
Prepares material quantity take-off and cost estimates for structural and architectural works.
Prepares bar chart schedules.
Prepares As-Built drawing for completed projects.

May 13, 1992 to May 1, 1993
PLASTERGLASS MFG. Inc., 150 M.G. Bldg., Makati City, Phils.
Company Engineer ( Civil works )

Duties and Responsibilities:
Prepares material quantity take-off.
Prepares manpower allocation and monitoring.
Prepares necessary construction drawings.
Attends weekly coordination meetings of all on-going projects and prepares accomplishment report.
Coordinates with Project Owner, Project Engineers, Architects and Sub-contractors.

October 15, 1991 to December 31, 1991
Community Environment and Natural Resources Office
Department of Environment and Natural Resources Office (DENR)
Masbate, Masbate, Phils.
Assistant Cartographer

Duties and Responsibilities:
Research, verify and check the technical descriptions of parcel of lands being applied for free patents.
Verify and check lot area computations.
Review TCT's for CENR Officer's approval and signature.

CHARACTER REFERENCE: Available upon request
Supporting documents also available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1096)

Go to Search Parameters...

Brief Description

I am a qualifies Inter provincial (red Seal) Industrial Mechanic (millwright), as well as a Interprovincial (red seal) welder certificate, with a all psition SMAW CWB and a 2 position GMAW CWB ticket.

Technical Project Manager

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

As you will see from the enclosed details I am a qualified and highly experienced hands-on Corrosion, Coating and Insulation Professional with + 20 years extensive onshore and offshore experience within the construction, oil & gas and petrochemical industries in both the Netherlands and abroad.

my jobs

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

I am Professional Logistician (CITT), Certified Purchaser, Journeyman H/D-Parts Technician and Warehouseman. I live and work in Fort McMurray (Warehouse Supervisor for Nexen Canada at Long Lake Project ($21 million inventory) -20 years of combined material distr.experience

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

over 11 years of heavy equipment operation experience in multiple industries.

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Workshop / Fleet manager over 20 years experience

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

Basic operational skills of the track hoe including safety procedures. Use of the engineer's level. Measurement of cross slope embankment and trench grade line using steel tape and level. Reading and understanding blueprints. Additional training on the backhoe and bulldozer.

Maintenance, water purification, reverse osmosis, materials, logistics, management

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

Welder or Welder Supervisor

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

I am a heavy equipment specialist. I repair all types of earthmoving equipment. My strong suit is welding and fabrication.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

Experienced Design Engineer

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

I desire a position as manager or associate manager to help grow and expand the company. My experiences so far include the former establishment of a home based import/export business with experiences in cultural behavior and product negotiations with foreign companies.

Channel sales, Institutional sales, Oem sales, Business development, International sales

Software Developer .NET, Java SQL

Crane operator and Driver

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Contracts Manager

Process Plant Manager, Metallurgical Management, Production Manager, Chief Sorter and Certified Flow-Sort X-Ray Machine operator.

Project control engineer with experience in planning and cost engineerig fields.

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out