Resume - Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre...

Misco Jobs

Resume #37041

CONTACT INFORMATION:
View contact information...

Education
* University Degree (5 years) in Chemical Engineering, University of the Studies "Federico II" of Naples – Italy (March 2003).
Thesis: "Removal of SO2 from combustion's smoke with Spray-Dryer method: effect of main operating variables on the removal efficiency (pilot plant, ENEL)", supervisors Prof. Eng. G. Volpicelli, Prof. Eng. A. Lancia, Dr. R. Nigro.
* Scientific secondary school Diploma, "A. M. De Carlo" Scientific High School of Giugliano in Campania (Na) – Italy (July 1988).

Training courses
* Master in "Management, Organization and Development of the Human Resources", Helyos Management – Italy (January 2006).
* Formation Course on Safety (D.Lgs. 626/94 e D.Lgs. 242/96), Industrialists' Union of Rome (October 2005).
* Formation Course on First Aid "I.R.C. Applicant Pioneer", Italian Red Cross (July 2005).
* Formation Course on "Energy saving and renewable sources of energy", Engineers' Professional Association of the Naples' Province - Italy (March 2005).
* Formation Courses, base and advanced, on "e-Commerce and Internet Marketing" and on "Formative Assistance for the Telematic Practice of the Enterprises' Register", OSNAP S.r.l. with the sponsorship of the Commerce' Chamber of Naples – Italy (February 2005).
* Course of Conversation English - level 5, English Intensive Language (EIL) School (ongoing).
* Participation's certificate to the Seminary "Human Resources Day", BeMore – Italy.
* Participation's certificate to the Technical Seminary on the "Opportunity to use technologies of Naturalistic Engineering for the ground defence", Geologist's Professional Association of the Campania - Italy.
Acquired experience: project procedure of Naturalistic Engineering and practical realization of a living palisade by double wall.
* Participation's certificate to the International Studying Days on the "Mitigation of the hydrogeological riskiness and environmental restoration: the approach of the traditional Engineering and of the Naturalistic Engineering", Engineers' Professional Association of the Naples' Province - Italy.
Acquired experience: knowledges of Naturalistic Engineering for the placing of the streams, for the stabilization of the hillsides and for the consolidation of the mountainsides subject to landslides and of moats.

Qualifications
* Chartered as Professional Industrial Engineer, section A (1st session 2003, no. 27/894), University of the Studies "Federico II" of Naples – Italy.
* Registered at the no. 15953, section A, all the sectors, of the Board of the Engineers' Professional Association of the Naples' Province - Italy (since 23rd March 2004).
* Registered at the no. 11096 as Engineer in the Board of the Duty Technical Consultant of the Naples' Court (since January 2005).
* Registered as Engineer to the Arbitration and Settlement's Chamber established in Engineers' Professional Association of the Rome Province - Italy (since January 2007).

ICT / Other skills
* High mastery of the use of the computer under Dos, Windows 3.x/95/98/98SE/Me/NT/2000/XP and Mac-OS, high ability to use software packages like MS Office, Autodesk AutoCad, MS Project, EP Project IMIS Kashagan Development, Macromedia Dreamweaver MX, MS FrontPage, MathSoft Mathcad, SPSS SigmaPlot, Dike, Fedra.
* High ability to program languages like Visual Basic (specialized in software for market researches), Turbobasic, Turbopascal and Fortran; high ability to modify software in Assembler language.
* High ability to use Internet (Digital signature, Web, Ftp, Video-Conference, News, Mailing, Peer-to-peer) and discreet practice in Web sites creation using HTML and ASP.
* Very high ability to solve PC software and hardware problems.
* Very high ability to assemble PC hardware and to install PC software.
* Knowledge of Commissioning Philosophy, Electrical Safety and Energy Isolation, Revamping of Turbomachines.

Professional experience
* From 29th March 2005 to now I am Project Manager of a company specialized in Pre-commissioning, Commissioning and Start-up of Oil&Gas Plants, Pipelines, Power Generation and Distribution Plants and Utilities. It also offers services like Human Resources Development, Training Centers, Process Simulation, Engineering and Maintenance (Rome, Italy).
From 08th January 2007 I am Interface Engineering Coordinator for the PMSC of the Kashagan Development Experimental Program – Onshore Plant 1st phase – North Offsites Area EPC Expansion (project value: 20 Billion USD) in Budapest (Hungary) and Almaty (Kazakhstan) for Snamprogetti Ltd c/o AgipKCO.
From 20th April 2006 to 11th October 2006 I was Proposal Manager and from 11th October 2006 to 08th January 2007 I was Project Manager for the activities of Pre-Commissioning, Commissioning, Start-up, Trial Operation, Operation and Maintenance Supervision on a exhausted lube oil – on specification gas oil conversion plant (project value: 1.5 Million Euro) in Gela for Elettra Energia S.p.A. c/o Enviroil Italia S.p.A. – Guascor Group.
From 1st September 2006 to 05th December 2006 I was HO Construction/Project Engineer for the Olokola LNG Development Project (Process Plant EPC) FEED – Nigeria (joint-venture Technip Italy S.p.A./ Snamprogetti S.p.A.) (project value: 7 Billion Euro) c/o Technip Italy S.p.A. (Dr. Ing. Roberto Barone – Technip Italy Proposal Manager, Francesco Ruscio - Snamprogetti Construction Manager).
From 29th August 2005 to 05th September 2005 I was Instructor in a "Course for Combined Cycle Power Plant Operators" in Teverola (Ce) c/o Eni Corporate University S.p.A. (final client SET S.p.A.).
Acquired experience: management of the whole project lifecycle, negotiating with users, estimating, planning and optimizing schedules then practice them in live, negotiating with customers and subs, estimating, planning and optimizing schedules then practice them in live, selling projects strategically and deliver them to the clients at a profit with advanced techniques in scope definition, project optimization and control, developing a project team and learn to diagnose & solve team problems, contract management, editing of presentations and training booklets, management and leading of technical-operating courses, editing of Proposals, Plans and Procedures, Construction Technical Proposal, Training Technical and Commercial Proposals, Construction Execution Plan, Constructability Report & Action Plan, Method Statements, etc…), engineering coordination/supervision of physical and soft interfaces, validation/resolution of Technical Queries and Concession Requests, P&IDs review/supervision, Engineering and Operation & Maintenance Documentation coordination.
* From 10th November 2003 to 06th October 2004 I was Plant Technical Manager of the IB Italian Brakes S.p.A., a company that produces composite brake blocks and pads for heavy transports (on iron and on rubber), at Via Palma no. 294 in Striano (Na) - Italy, ph. +39-081-827-7927 (Dr. Giuseppe de Martino, General Manager).
Acquired experience: commissioning supervisor during start-up activities, pre-molding and vulcanization die design and preexistent die optimization, CAD 2D/3D technical design for homologation of products, management of technical papers for manufacturing and purchasing, research and development on composite materials on polymeric array and conduction of tests on hardness and frictional factor, oleodynamic and pneumatic presses maintenance and CNC machines programming, quality control and management of the productive problems in certified ISO 9001:2000 company, "on site" products testing, "on order" production's planning and personnel management, technical contacts management of suppliers and customers, ECE/ONU Regulation no. 13 and no. 90 knowledge.
* From 05th June 2003 to 04th December 2003 I was R&D Scientific Consultant, about the activity of the National Research Project (PRIN) " Effect of the presence of natural zeolitezed materials on the activities of surface of organ-minerals aggregate of the soil", of the Department of Engineering - University of the Studies of the Sannio at Corso Garibaldi no. 107 in Benevento, Italy, ph. +39-0824-30-5872 (Prof. Eng. Francesco Pepe, University Teacher).
Acquired experience: conduction of tests in laboratory, utilization zeolitezed materials, utilization of atomic absorption spectrophotometer.
* From 01st April 2003 to 04th June 2003 I was Pre-commissioning, Commissioning & Start-up Engineer, about the research activity on "Purifying processing of combustion's smoke (pilot plant, ENEL)", of the Department of Chemical Engineering - University of the Studies "Federico II" of Naples at Piazzale Tecchio no. 80 in Naples, Italy, ph. +39-081-768-2243 (Prof. Eng. Amedeo Lancia, University Teacher).
Acquired experience: commissioning engineer managing P&ID and PFD, process commissioning and operating procedures development, start-up, maintenance and optimization of chemical plants, purifying process of polluting effluents, utilization spray-dry technology.
* From 02nd April 1999 to 31st March 2003 I was Pre-commissioning & Commissioning Supervisor, about the research activity on "Purifying processing of combustion's smoke (pilot plant, ENEL)", of the Department of Chemical Engineering - University of the Studies "Federico II" of Naples at Piazzale Tecchio no. 80 in Naples, Italy, ph. +39-081-768-2243 (Prof. Eng. Amedeo Lancia, University Teacher).
Acquired experience: commissioning supervisor managing P&ID and PFD, process commissioning and operating procedures development, start-up, maintenance and optimization of chemical plants, purifying process of polluting effluents, utilization spray-dry technology.
* From 24th July 2002 to 28th March 2005 I cooperated as EDP Manager at the Tribe Piccola S.c.r.l. at Corso Vittorio Emanuele no. 74 in Naples, Italy, ph. +39-081-669393 (Dr. Maria Vittoria Florio, Managing Director).
Acquired experience: programming and management softwares for market researches and data conversion, management contacts with foreign suppliers.
* From 23rd April 2002 to 28th March 2005 I was EDP Manager at the C.A.F.-CISAL of Villaricca (Naples, Italy) at Piazza Maione no. 2.
Acquired experience: management of fiscal softwares, compilation 730/RED/ISE models, management contacts with local Public Administration and the customers.
* From May 2001 to 31st March 2003 I was Trainer, to private people, on how to use Windows, Microsoft Word and Internet;
* From 1994 to 28th March 2005 I was ITC Consultant, installation or repair of PC software and hardware on computer systems in a lot of companies and private people;
* PC software programming (Visual Basic):
- of market researches and pivot tables creation, VOLAVIAMARE at Piazzale Stazione Marittima in Naples, Italy;
- of data format conversion, market researches, pivot tables and archives creation, Tribe Piccola S.c.r.l. at Corso Vittorio Emanuele no. 74 in Naples, Italy;
- of employees' salaries control, materials charge-discharge and customers receipts, Pipolo at Corso Europa in Villaricca (Na), Italy;
- of stock control, Centro Copie Villaricca and Mic Motors in Villaricca (Na), Italy.

Other information
* In 1986 I obtained the "A" Drive license and in 08/12/1988 I obtained the "B" Drive license.
* Since 05/31/2004 I am member of the Young Engineers Commission and since 01/26/2005 I am member of the Environment Commission of the Engineers' Professional Association of the Naples' Province - Italy.
* Since 07/12/2005 I am member of the Italian Association of Industrial Plant Engineering (ANIMP).
* In 1987 and in 1988, during secondary school studies, I was voted for students' deputy in the District Scholastic Council of the 26th Scholastic District.
* I accomplished the military service from 12/06/1994 to 11/23/1995 (12 months), rank Corporal of the helicopterists, as "Chief of the Operating room staff" in the O.A.I. section of the 55th Group Army Aviation's Squadrons "Dragone" in Padua, Italy.
During the military service I was elected for troop's deputy in the COBAR of the 55th Group Army Aviation's Squadrons "Dragone" in Padua, Italy, and in this COBAR I had the nomination as Secretary.
* Since 06/11/2004 I am Operating Ordinary Member of the "Falchi del Sud" Voluntary Service Organization, at Via S. Giacomo dei Capri no. 65 bis in Naples - Italy, as "Civil protection provisional auxiliary" and hold the position of Account's Reviser for the biennium 2005-06.
* Since 01/01/2005 I am member of the Engineers' Association, Naples – Italy.
* Hobbies:
- cuban salsa (I dance since 2005, intermediate level);
- martial arts (Judo, green belt, 1975-1980)(Karate, black belt, 1980-1986)(Tae Kwon Do, green belt, 1986-1990);
- aquariology (I proposed, and was accepted, a project for a company to produce chemical products for aquariums' water treatment, to obtain a public financing taking advantage of the Law 608/96 (art. 9 septies) pertinent the "honor loan", but I didn't take part to the obligatory courses because I preferred to obtain the university degree before);
- electronics (assembly of little equipment starting from the creation of the printed circuit board);
- aero-model making (creation of aero-models by balsa wood);
- philately and numismatics;
- financial trading (I manage a web site of financial for investments in the short term).

Total availability to travel and to relocate wherever in the world.
Predisposition to the human contacts and the team job, in mutual collaboration.

My greater aspiration is to continue to grow as culturally as professionally through the job.

I authorize the treatment of the personal data (Law 196/2003).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1096)

Go to Search Parameters...

Brief Description

Heavy Eqiupment Operator,Construction,

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

Blueprint Reading - Mig, arc and gas welding

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Security, life support, camp management, logistics

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Truck Driver with experience in oil field activites.

Electrical engineer (2 years experience),researcher(1 year experience)

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Strong English verbal and written communication skills • Specialized knowledge in MS Office suite- Outlook, and filling out DD Forms • Computer literacy in word processing, database maintenance, and spreadsheet software

Instrumentation and Controls Engineer

I have worked in the construction field for the past 11 years in every element mother nature could throw at us. I also have alot of experiance with the day to day up keep of tractors and large trucks, and some wielding/fabricating work aswell.

Mechanical Engineer with excellent interpersonal and computer skills, a strong supervisor able to train and motivate teams to peak performance.

Professional ROW Agent and Landman

Free! Esri Software Senior Developer

I perform a variety of duties as well as working in a collaborated team player environment; 3 plus years of experience in clerical work as well as Customer Service work; Ensure that the necessary quality records are specified, generated and controlled in accordance with the appropriate procedures;

Senior manager with extensive experience in the development and management of information technology and data communications operations. Skilled in designing, building and operating wireless networks. Excellent background in the integration of multiple technologies in a single network platform.

More than 10 years of experience in senior positions as Financial controller /company secretary in various reputed companies including external role as consulting company secretary/financial consultant.

Secure a position within the maritime industry that will benefit from my excellent technical, professional and leadership skills as well as my education and license qualifications.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out