Resume - I&C Technician with broad experience

Misco Jobs

Resume #50546

CONTACT INFORMATION:
View contact information...

Qualification Summary

I am experienced with instrumentation and control, both in plant and sales, design and commissioning. I am qualified as a field service representative, sales engineer, engineering technician, I&C technician, system integrator, technician,
DCS technician, HVAC engineer or technician, and computer technician.

Experience

2004 to 2006
Cal Energy, a MidAmerican Energy Company. Calipatria Ca.
I&C/DCS Technician
Instrumentation and DCS support for 13 generating units in 6 geothermal power plants located in the Imperial Valley, Ca. Supporting Foxboro I/A DCS running on
Sun Unix platforms, Rosemount Delta V DCS running on Microsoft NT4 operating systems, Woodward, Triconix, and Mitsubishi governor control systems and Bently
Nevada temperature and vibration monitoring systems. Responsibilities included
DCS repair, maintenance, data backups and programming, PLC trouble shooting and repair, maintenance and configuration of RTX plant data logging systems and well field SCADA systems. Used all the above systems along with Hathaway event data collection systems we are responsible for identifying causes of turbine trips and supplying supporting data and documentation. Installed, configured and maintained database and hardware for Druck documenting calibration system.

2001 to 2004
Champion Systems, Jamestown N.C.
HVAC control system engineer
All aspects of commercial HVAC control system engineering and design from bid preparation to submittal including hardware specification. Included control system logic programming and graphic screen configuration of Delta Control DDC building control software, and control system logic design for chillers, boilers, air handlers, cooling towers and pumping systems. Also supervised field network installation and performed system checkout and startup of BacNet based Delta Controls DDC
systems with OrcaView software installed and configured on Windows XP
operating systems.
1998 to 2001
Systemation, Fairport N.Y.
Systems Integrator, engineering technician
Formed applied services division of Systemation with another individual. Focus was system integration for municipal water and waste water treatment plants.
Systems used Modicon PLC's, Opto22 I/O and Citec software running on Microsoft
NT4 server/operating systems. Services included panel design and fabrication, installation, configuration, calibration, start up and commissioning of systems.
Provided factory trained field service for the sales division on Foxboro instrumentation and calibration services for flow metering devices.
1985 to 1998
Total Control System Services, Inc., Varysburg N.Y.
President, founder and primary business manager.
Manufacturers representative for several major lines of instrumentation. Provided repair, calibration, maintenance, installation and start up of instrumentation and control systems in New York and Pennsylvania with additional customers scattered from New England to North Carolina. Provided technicians for plant shutdowns and outages. Primary customers were water and waste water treatment plants, paper mills, food processing plants, hardwood lumber drying operations, and various other applications. My involvement included general business management, sales, system design, supervision installation, start up and calibration of instrumentation. Sale, design, installation and servicing of data telemetry and SCADA radio based systems.

1978 to 1985
The Foxboro Co., Buffalo N.Y.
Field Service Representative, Sr. Field Service Representative, Systems Analyst
Provided field services for entire Foxboro product line. Supervised installation and calibration of instruments. Specialized in power system and boiler control system start up and commissioning for utility and industrial applications. Hardware experience included
Foxboro DCS systems, electronic and pneumatic process control instrumentation and systems, and analytical instrumentation. Experience includes Water and Waste Water,
Paper and Pulp, Chemical, Food and Dairy, Refineries, Foundries, Steel works, and many other various applications.

Licenses
F.C.C. GMRS license
F.C.C. Amateur Radio License Advanced

Education
A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y.
Additional Classes
Invensys Triconix System Maintenance
Foxboro I/A System Maintenance
CiTec software configuration
Delta Controls OrcaView software configuration
Eckhardt control valve sizing and specifying school
Foxboro SPEC 200
Foxboro Spectrum/Video Spec-Micro Spec/ Fox300

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1032)

Go to Search Parameters...

Brief Description

CSWIP Senior Welding Inspector

Deep knowledge in motor engines and auto-eletrical , eletronic Injection , and etc. I've got trade qualification as mechanic and deep background.

I&C Technician with broad experience

Electrician, Air Conditioning & Refrigeration Mechanic with Industrial, Commercial and Residencial Experience, Currently working for an Industrial Switchgear and Automation specialist in the Electrical Industry as a sales engineer.

Instrument Engineer / Supt

Energetic and versatile Quantity Surveyor (QS) with proven expertise, working with an International Airport Construction Company.

Professional Heavy Equipment Operator rated with Class B+, Professional Driver for both cars and Heavy Vehicles, Knowledge in Purchasing, Surveying.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

Water & Wastewater Specialist searching for a challenging position overseas.

Production, Laborer, Auto Detailer, Assembly

34 years in instrumentation industry.

MEng. In Mechanical Engineering,career as a Sales Executive Manager,Capable of using Microsoft Word, Excel, Power Point, also Enterprise Resources Planning SAP R3, Graphic software Adobe Photoshop, Auto CAD. communication,leadership,work in both team-oriented and self-directed environments

Open Crane Operator and Advanced Rigger

Dynamic, self motivated and team player

Qualified Electrician,with 15 years experience.

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Overall manager for M&E services on a large high school, including 2 boiler houses, heating, hot and cold water, gas, electrical & electronics, and directional drilling.

Welder looking for immediate full time position

Excavator operator ,matric pass, 2 years of experience

Professional Contract Chef / EMR Available

Experienced concrete superintendent

Advanced British CITB scaffolder / Supervisor / Foreman-16 years exp

I inspect equiptment for faults & malfunctions, determine repairs required, do the repairs required and test them.

A dedicated worker who is able to solve on job problems and leads the team with motivation

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Paramedic with urban/rural/industrial experience.

I can work as a carpenter, mason, cleaner (territories and premises), car driver and assist in other jobs.

Besic Welding Diploma HOlds 2 position stick SMAW and 1 position flux core tickets from Canadian Welding Bureau Certification....WHMIS, Fall Protection, confined space entry, hoisting and Rigging , forklift ticket, occupational health and safety, hydrogen sulfide (h2s) , CPR,

I have 12 years experience with working as a Diesel Fitter Mechanic, I am completly confident with working indepently or as part of a team. I have a certificate in HV mechanical & Electronic Systems, Maintenance and Repair.

Millwright/Industrial mechanic and industrial construction mauntenance mechanic

industrial instrument mechanic/building automation

I want to find work Overseas in the Tower Construction Field.

An experienced Rig Mechanic with high level knowledge on Mining industry

Installation, maintenance and repair of medical equipments

NACE-USA Certified Senior Corrosion Technologist & MICorr grading from Institute of Corrosion-UK, having 19years work experience in Cathodic Protection Technology Services & Corrosion Control Services is available for employment.

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Instrumentation Technician/Trainer/QA/QC

Installation, Maintenance, and Repair, Multi Site Cosmetic/Maintenance, Equipment Operators

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Excavator operator / loader

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Multi-skilled engineer

testing, commissioning, construction and maintenance

BGAS Certified Painting Inspector Grade -2 & Civil Eng. Diploma Holder working as Painting/Civil Inspector, with more than 18 years Exp. in the Engineering/ Construction Oil & Gas field & Industrial construction. My principle activities are Quality Controlling 'Inspection monitoring & Supervision

Instituteof management Diploma, NVQ management level 4, Certificate of professional competence national & international road haulage, Confined space certificate of competence,CITB health & safety certificate, Excavators, Loading shovel, Dumper Trucks, Road rollers, HGV1 licence

Experienced Ops Engineer

“Specialist in material management with a reputation of extraordinary retention level”

Drafter

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out