Resume - Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert ...

Misco Jobs

Resume #54487

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE Technical Manager
A position within a company that requires the services of a self-motivated and disciplined employee. With extensive experience and skills in the areas of team development, fitting, electrical, refrigeration and maintenance.

QUALIFICATIONS Fitter & Turner
Qualifications and training achieved through the Australian Regular Army, awarded by the Victorian State Training Board.

Electrician
"A" Grade, licence for Victoria and Western Australia,
Endorsed "Electrical Mechanic".

Refrigeration Mechanic
Licence endorsed by Refrigeration and Air Conditioning Industry Board.

Industrial Workplace Health and Safety Officer
Training completed through National Safety Council of Australia, Townsville

TRANSFERABLE SKILLS
q Extensive experience in: -
- The repair, overhaul and maintenance of all mechanical/electrical equipment
- Control and monitoring of equipment
- Carrying out preventive maintenance, including the development and implementation of preventative maintenance schedules for various mechanical equipment
- The provision of technical support and advice, both verbally and written technical data reports
- Reporting on defective equipment q Excellent staff training, supervision and motivation skills q High commitment to Workplace Health and Safety q Experience and capable of working in remote and isolated areas – I have also previous worked in hostile environments in both Bougainville and East Timor.

q Proven time management, organisation and prioritisation skills all of which have developed further through my training in the Army q Well-developed problem solving skills, both lateral and analytical – I regard a problem as a challenge, apply forward thinking principles and always maintain a solution focus.

q The ability to work equally well independently and unsupervised or within the structure of a team environment – additionally I have the ability to undertake the responsibilities of a leadership role.

q I communicate well with people at all levels and have a proven ability to build and develop a rapport with people of all cultures, nationalities and religions.

q Through the use of reflective listening skills I ensure that I clearly identify requests of instructions and endeavour at all times to meet or exceed expectations for delivery of service.

q I work well under pressure, have the ability to focus on more than one task at a time and am not flustered when faced with non-routine, difficult or stressful situations.

TRAINING COURSES Australian Regular Army
Fitter & Turner/Armourer (1995)
Maintenance Technicians Course (1996)
Marine Engineering Course (1998)
Minor Marine Equipment Maintenance (1999)
Promotions Course (Trade Foreman) (Sept-Oct 2001)
Certificate III in Refrigeration and Air-conditioning (2002)
Certificate III in Engineering (Electrical Trade) (2002)

Certificate IV in Assessment and Workplace Training
Royal Life Saving Society (2001)

Industrial Workplace Health and Safety Officer (QLD)
National Safety Council Of Australia (2005)

AWARDS/MEDALS 2004
Student of Merit
Awarded for Highest average results for the combined Certificate III Electrician and Certificate III Refrigeration and AIR Conditioning.

2001
Active Australian Service Medal
United Nations Medal
Awarded for active operations in East Timor.
] Craftsman of the year
Awarded for excellent trade quality, attitude and approach to Army

2000
Soldiers Medallion
` Awarded for outstanding service and dedication as a Marine Engineer for 30/35 Water Transport and Terminal Squadron.

1999
Australian Service Medal
Award for service in Bougainville.

EMPLOYMENT HISTORY

1995 – Current Australian Regular Army
During this period I obtained my qualifications as a Fitter working within the Army marine division, primarily employed as a Marine Fitter maintaining 60 tonne barges and small craft. In January 2002 I transferred to Electrician/Refrigeration Mechanic, and am now employed in this role at Campbell Barracks, Swanbourne, as the Electrician for Special Forces. I have had overseas service in both East Timor and Bougainville. During 2004-2006 I also held the position of Workplace Health And Safety Officer in Townsville.

2004- 2006 Drew Twigg Refrigeration and Air-conditioning
Small business operating on a part time basis, installing and repairing domestic and light commercial refrigeration and air-conditioning equipment.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1096)

Go to Search Parameters...

Brief Description

Extensive and progressively responsible hands-on management experience.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Highlight: Thirty-Six Years Continued Experience in the petro-chemical, power generation, mining and commercial industrial sectors, working with several major companies at various levels of responsibility in the procurement/supply/distribution/and management of materials.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To obtain a challenging position that utilizes proven experience and skills.

E&I QC Inspector

Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman

Mechanic/Welder Field, shop, underground

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations

Paramedic with 22 years experience in emergency care , Remote Site Medic certified, ACLS Provider, BLS Instructor, HSE Safety Coordinator, Divemaster/Rescue Diver. Work experience includes managing muti national task force in middle east, and provision of clinical care in south asia remote sites

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.

Project maintenance manager/planner/trainer

Complete Facility Maintenance

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Primavera 6 certified planner

Communicator, negotiator, manager, natural leader

20+ years in culinary field,client pleaser,professional with a sense of humor

IT PROJECT MANAGEMENT

Logistics Manager, Rig Manager, Materials Manager

Manager / Engineer ( HW / SW / QA / Training )

Working on projects for various E&P Companies and Contractors

To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Africa specialist - 25 years Africa experience, 16 years work experience, general management (production, materials, logistics and international transport fields), 14 of which are at managerial level, the last 11 years being spent as an expat in West Africa and West-Central Africa.

Qualifications: S.S.C., Intermediate, NCTVT - Vocational Diploma In Motor Mech, A.M.I.A.E. (India, Auto Engg).

Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word

9 Yrs Experience in Oil & Gas Estimation, Civil Construction, Architectural Facades, Construction Chemicals.

Cad design, cnc machine operation, electrician residential, commercial and power company

Cad Operator

audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.

I am an experienced welder/fitter.

Electrical Eng./Supervisor - Power Plant

MAINTENANCE ENGINEER, GAS TURBINE, FITTER

QA/QC welding isnpetion experience on US & overseas projects. CWI, Level II MT, UT, PT, RT film interpretation

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

MIG) Gas Metal Arc Welding, (TIG) Gas Tungsten Arc Welding, (SMAW) Shielded Metal Arc Welding “Stick”, OXY-ACETALENE Welding and cutting. I have also been trained in Pipe Welding, and have an extensive knowledge of Ferrous and Non-Ferrous metals along with numerous skills in metal fabrication.

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out