Resume - Experienced Mechanical engineer as Tunneling specialist in operation,maintenanc...

Misco Jobs

Resume #61915

CONTACT INFORMATION:
View contact information...

PERSONEL INFORMATION.
Date of Birth: 30th May 1972, (35 years).
Nationality: Indian.
Marital Status: Married.
Passport Details: Valid up to 24th May 2016.
Languages Known: English, Arabic, Hindi, Tamil and Malayalam.

EDUCATIONAL QUALIFICATION.
Degree in Mechanical Engineering, (B.Tech Mechanical)
From KERALA UNIVERSITY, India.
Diploma in Mechanical Engineering
From Board of technical education, Kerala.

OTHER QUALIFICATION.

Production Management

Completed from Annamalai University Distant Education System.

Working knowledge in Auto Cad, Microsoft Word, Excel and use of INTERNET etc.

Kuwait Driving License Valid up to 2007.
Inter national Driving License valid up to 2007.
Australian license from Queensland transport valid up to 2011.
Saudi Arabia driving license valid until 2012

Having valid Australian work visa

WORK EXPERIENCE

Work Experience in brief (Approx. 14 years) is given below

March 2007 to till date: Tunnel engineer with M/s Al Muhaidib
Contracting Company, Saudi Arabia

November 2006 to March 2007: Microtunnelling supervisor/operator with
M/s Rob Carr Pty Ltd, Australia.

June 2006 to November 2006: Tunnel Engineer with M/s Al Muhaidib
Contracting Company, KSA

March 2003 to May 2006: Microtunnelling operator in
M/s Mushrif Company Ltd, Kuwait.

November 2002 to March 2003: Microtunnelling Engineer in
M/s House of trade contracting company, Kuwait.

August 1995 to November 2002: Microtunnelling operator with
M/s United Gulf Construction Co.W.L.L, Kuwait.

November 1993 to July 1995: Inspection Engineer with
M/s. Flow tech Industries LTD, Bombay, India.

NATURE OF WORKS IN DETAIL

In the microtunnelling field worked in different machines like ISEKI, SOLTAU, and HERRENKNECHT. I was involved to do 120 KM in various ground conditions (Sand, clay, Rock, Lime stone, Slit clay, Boulders) in different diameters of steel, concrete, polycrete, clay and GRP pipes. I worked with different guiding systems like UNS, ELS, TACS, PJS –TACS, Laser without target, Manual measuring with theodalite etc. Also worked with different type of machines like open face, slurry, EPB slurry, skip and winch etc…

M/s Al Muhaidib Contracting Company, Saudi Arabia.

As a team leader of the microtunnelling division, I am leading the all team of dewatering, Microtunnelling, Inspection team. Main functions are coordinate with consultant, ministry for permits, keep the quality, bill payments, Inspection of work site, execution as per the specification, alterations if necessary, meet the target of production and administerial problem solving with the employees, work schedule as per pro gramme etc. I am leading the operational team of AVN 800, AVN1500, AVN 2000, AVN2000D and MTS 800.Arranging the spare parts from Herrenknecht, MTS-Perforator and making pro gramme for the preventive maintenance. Also coordinating the different problems usually facing in the tunneling operations. Decision making as per the situations. Arranging the pipes, materials, and manpower. Giving opportunity for new faces in this field, giving training and making professionals for future. Also handling the petty cash and monitoring the expenses and activities in the site without affecting the production. MTS machine working with TACS steering system and Herrenknecht machine working with UNS guiding system. I had got a good opportunity to learn these said guiding systems how is working during operation.

M/s Rob Carr Pty Ltd, Australia

In Rob Carr pty ltd, operating the Iseki and soltau shields. Leading the team of microtunnelling crews, arranging the required materials and equipments, coordinating with client and safety construction departments, recording the documents in proper ways, training the crews and giving site inductions as per the law complied by Queensland (Australia) council, doing the proper maintenance of the machines, helping with pit construction and restoration crews. Making the plan for proper schedule of tunneling operations. Making plan to do the best production and the quality work in the allotted budgets.

M/s Al Muhaidib Contracting Company, Saudi Arabia.

As a team leader of the microtunnelling division, I am leading the all team of dewatering, Microtunnelling, Inspection team. Main functions are coordinate with consultant, ministry for permits, keep the quality, bill payments, Inspection of work site, execution as per the specification, alterations if necessary, meet the target of production and administerial problem solving with the employees, work schedule as per programme etc. I am leading the operational team of AVN 800, AVN 2000 and MTS 800. Also coordinating the different problems usually facing in the tunneling operations. Decision making as per the situations. Arranging the pipes, materials, and manpower. Giving opportunity for new faces in this field, giving training and making professionals for future. Also handling the petty cash and monitoring the expenses and activities in the site without affecting the production. MTS machine working with TACS steering system and Herrenknecht machine working with UNS guiding system. I had got a good opportunity to learn these said guiding systems how is working during operation.

M/s Mushrif Trading and Contracting, W.l.l

In the microtunnelling section of Mushrif Company is a specialty division included piling, dewatering, CCTV, I was involved to managing the site requirements and supervising the operation and maintenance of the latest edition of the tunneling machine diameter of AVN400mm up sizing AVN500mm, AVN600mm,
AVN800mm up sizing AVN1000mm, AVN1200mm up sizing AVN1400mm and AVN1600mm from Herrenknecht, Germany. As well as operating and managing the pipe jacking machine MH-2 from Herrenknecht diameter of 1200mm, 1600mm, 2000mm.Executing the site activities like jack setting, laser fixing, flange fixing, concreting back side of the jack rig, making the complete set up for another operation and coordinating with the ministries, arranging the materials from the local market, make planning for the equipments and mobilization of the units after the operations. Ordering the pipes as per schedule, planning the operation schedule. Arranging the manpower and give training for the crews about the tunnel jobs and safety constructions. Keeping the safety measures and good house keeping of the materials and machines, mobilizing the machine and materials in full safety, keeping the drive records and daily report for future reference, making advance plans for the requirement of equipments without any delay of production. Arranging the cleaning and further activities after the operation in completed tunnels. Making planning for preventive maintenance before the next operations.

Sewerage Inspection.

I am leading the team of sewerage inspection of the sanitary and the storm water supplies using the method of CCTV of Hytech, France. Inter acting with the ministry officials and making bill of quantity after the work for the payment. Arranging the equipments and managing the team. Also helping the team of dewatering with well point methods and using auger machine of 7m length drill and raiser pipes, Header pipes, Perrot type materials and Hudig pumps for excavation. Helping the team of Sheet piling and the bore piling.

M/s House of Trade and Contracting W.l.l, Kuwait.

In the microtunnelling section of House of Trade Company, leading and operating the team of tunneling with SOLTAU, Germany diameter of 600mm and 700mm.Making planning for the production and arranging the equipments, accessories using for tunneling process. Laisoning with the ministries and the consultants, operating the job with international standards and safety procedures. Scheduling the work as per the priority and maintaining the machineries with preventive manner.

M/s United Gulf Construction Company, Kuwait.

In the microtunnelling section of UGCC, working in the operation and maintenance of tunneling machines
Like SOLTAU, GERMENY with different diameters such as 500mm to 1200mm and ISEKI, JAPAN diameters of TCC350, and TCC500.The entire machine working with latest computerized and hydraulic systems. Also repairing all types of water pumps, valves, lubrication systems, compressors, overhead cranes, welding machines and blower fans etc....Help the team of mechanic to up size the shields.

Making plans and maintaining records of the preventive maintenance system to increase the production. Evaluating the timing costs and making reports for the insurances claim.
In the CCTV section operating the camera and making records with the ministry inspectors, Repairing the camera and electrical accessories in the operating van from IBAK-KIEL, GERMANY.
In the Material department my responsibilities extend to sending inquiries for spare parts, consumable materials using in the work site from different origins, collecting quotations, technical and commercial negotiations and prepare work orders of the product as required. Inspections of the materials, vendor works, receiving materials at warehouse and issuing upon request.

Following are some of the projects of the Ministry of Public works, Kuwait I have been associated with.

Project No.SE/1/1993-'94,
Sanitary Sewer Renovation Project, Phase V, Part A, Sulaibhikat.

Project No. SE/130/1994-'94,
Sanitary Sewer Renovation Phase II, Part C
Daiya and Shaab.

Project No.SE/18/1996-"97
Sanitary Sewer Renovation Phase III, Part A
Kuwait City and Shuwaikh residential Area.

Project No. SE/29/1999-'00
Sanitary sewer Renovation Phase II, Part B
Shuwaikh Industrial Area and Quortuba.

Project No.SE/32/2000-2003
Sanitary sewer renovation Phase III,
Rumaithiya.

Project No.SE59/20001-2002
Sanitary renovation of Rabya.

Project No.SE/67/2002-2004
Infra structure of housing, Jaleeb surra area.

Project No. RA /59/01-03
Water supplies and Irrigation project, Abdaly.

Project No.C4/02-04
Drinking water line project, Mutla to Airport.

Project No.SE/46/03-04
Sanitary renovation for Salwa area.

Project No. RA/97/04-05
Culvert project North Doha Area.

Project No.340/99-01
NHA housing Infra structure, Jahra, Kuwait.

Project No.C-11 and C-12, Sanitary Drainage of Jeddah, KSA.
Project No. CAL/009 Sanitary drainage in Queensland, Australia.

Project No.C-11 and C-12, Sanitary Drainage of Jeddah, Saudi Arabia.

From November 1993 to July 1995

As an Inspection Engineer, control the quality of the pipe fitting products for the government projects, Co-ordination of the inspection department and the external inspection agency, execution and scheduling the inspection department on priority. X-ray testing and high precision measuring instruments was in use for such inspection purposes. The maintenance department activities were also carried out at the same time.
I have been associated with the commissioning of chemical plant BECL, Shajahanpur, and UP, INDIA in 1995.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 1032)

Go to Search Parameters...

Brief Description

Strategizing and implementing plans to achieve Production targets in consultation with relevant stake holders in a safe manner. • Scheduling Mining, Ancillary Equipments and Labor to achieve Production and Safety Targets. Ensure proper and efficient utilization of all equipment

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)

International Business Development - Africa/Europe/Middle-East

Free! I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

Rigger with RGIT 20+ years experience

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

QUALIFICATIONS/LICENSES: Full Drivers License, Class 2 Truck License, 'Site Safe' endorsement, 'Wheels, Tracks & Rollers' Drivers License & Endorsement (Unit Standards 16701, 16702, 16703). Skills Summary: Digger Operator, Bobcat Operator, Roller, Truck Driver (4 wheeler), Concrete Laying,

Miner/trainer/shift boss assessor

I am a 3rd year heavy duty mechanic i have worked on all sorts of equipment from electric gorman rupp pumps to desiel engine huydraulicly actuated concrete pums,air compressors ,loaders,cement mixer trucks,centerfuges , pannels,pipehaulers, forklifts

Can work with computers, good communication skills, team player, can work under pressure

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Nace certified coating inspector level 3, Chartek approved fireproofing inspector & full qualified insualtion inspector.

Fitter Including Machining and Diesel Fitting

Internationally Expierenced, First Year MBA, Arizona State University

Precision Millwright, Welder. Turbines, Power Plants, Ethonal Plants, Steel Mill Plants.

experienced electrician with vast instrumentation and supervisory experience.

Operating front-end loaders & dozers in the waste industry

operating various types of heavy equipment

15 years experience in the management, production, materials, logistics and international transport fields, 13 of which are at managerial level, the last 10 years being spent as an expatriate in Nigeria, France, Togo and West-Central Africa.

An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi

Mechanic / Heavy Equipment Oppr. / Floorhand /

Possess solid understanding in Building Services, such as designing, managing projects, supervising and evaluating payment certificates

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

25+ years Procurement, Material Control and Logistics Experience / Public and Private Corporations

Logistic Job Skills: Stock Turn-in/Turn-out, Stores Indent/Requisition, Stores Data Entry, Physical Inventory Management, Stock Replenishment, Management Reports, etc.

SCADA, DCS, T&C, O&M

Hard working and down to earth person

HSE, Manager, Trainer, Advisor, Emergency response,Firefighting

Over 26 years of skills, education and professional experience with large and small-scale industrial plants, utility design, maintenance and operation, and materials handling with 10 years Utility Engineering instruction experience at a local Technical College. Management skills include working to s

Manager - Business Operations Consulting ¡V Constructability Planning, Tracking Systems, and Composite Modeling.

Sales Engineer/Sales Director in Computer and Engineering industry

Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate

I am an experienced HSE Professional knowledgeable with program-procedure development and implementation, accident-incident prevention and investigation, root cause analysis, supervision, contractor compliance, security programs, medical programs, health and food programs, environmental programs

Company Dispatcher,service Coordinator,Administrative Exp.

Qualified refrigeration & air conditioning technician. I have completed many courses in the refrigeration and air conditioning trade also heavy current electrical. I have completed and past my theory exam in Refrigeration Engineering I still have to do 150 hours of practical drawings.

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

Built, operated and maintained three processing plants. Abrasives, roofing granules, high density sands for water filtration and coal preparation were the main products.

Electrician-Industrial

Organized, attentive to detail and able to prioritize and handle multiple projects with competing deadlines

I have over 30 years of experience in the electrical industry, primarily in the industrial sector, and in a supervisory capacity.

Experienced maintenance scheduler planner with CMMS background and project management experience

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

Experienced Regional Manager (Russia, CIS, Eastern Europe), liaison between the US and overseas sides of operation.

Manager, Team leader, Computerized production management, International import-export, letters of credit, banking, assistant

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Survey Party Chief ..... Will be relocating to Colorado or West Coast this spring.

My skills are in construction, fabrication, maintanence and electrical HV fitting. I have CN, LF and WP tickets. First aid cert.

Driving hotshot for constuction material:sheetmetal, pipe, concrete. have drivin allover alberta, operated dodge half ton with 20' heavy duty bumper hitch trailer, F550 flatdeck with 30' gooseneck trailer, various other pickups and flatdecks, also have some experiance with driving an F650 flatdeck

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out