Resume - Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Crane...

Misco Jobs

Resume #64452

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:
10/07 to Present – Bartlett Nuclear @ Crystal River Nuclear Plant, Florida
Position: Heavy Equipment Operator
My Duties: Operate Mobil Cranes, Track Cranes, Off Road Cranes, Overhead Polar Cranes, Forklifts, and Tractor/Trailer During Fall Nuclear Refueling Outage.

09/07 to 10/07 – Atlantic Group @ North Anna Nuclear Plant, Virginia
Position: Heavy Equipment Operator
My Duties: Operate Mobil Cranes, Track Cranes, Off Road Cranes, Overhead Polar Cranes, forklifts, and Tractor/Trailers during Fall Nuclear Refueling Outage.

2/07 to 7/07 – ITT Systems @ Camp Arifjan, Kuwait
Position: Recovery Vehicle Operator.
My Duties: Operate Off Road Cranes, M-88, Wrecker, Forklifts, Tractor/Trailer, and other equipment plus Rigging to upload and download recovered battle damaged military equipment.

1/07 to 2/07 – BECON Constructions @ Texas Nuclear Power Plant, Glen Rose, Texas
Position: Heavy Equipment Operator.
My Duties: Operate Mobil Cranes, Off Road Cranes, forklifts, and Tractor/Trailer on Steam Generator Replacement Project.

12/06 to 01/07 – Alstrom Power @ Dominion Power Station - Chesterfield, Virginia
Position: Heavy Equipment Operator
My Duties: Operate 330-Ton DEMAG Crawler Crane. To erect a new Bag House for SGR Project.

10/06 to 11/06 – Atlantic Group @ Surry Nuclear Power Plant, Virginia
Position: Heavy Equipment Operator
My Duties: Operate Mobil Cranes, Off Road Cranes, Polar Overhead Crane, Forklifts, and Tractor/Trailer during Fall Refueling Outage.

5/06 to 10/06 - Stebbins, Inc. @ Dominion Power Station in Chesterfield, Virginia

Position: Crane Operator
My Duties: Operate Grove 700E Off Road Crane to set equipment, and construction of a water tank.

12/05 to 5/06 - International Chimney Corp. @ Dominion Power Station in Chesterfield, Virginia
Position: Heavy Equipment Operator
My Duties: Operate Off Road Crane, and Forklifts to pour concrete set rebar, and set equipment during erection of a 400 foot Smoke Stack.

08/24/05 to 10/02/05 - Fluor Global @ Virginia Nuclear Power Station, Virginia
Position: Heavy Equipment Operator
My Duties: Operate Off Road Cranes, Overhead Polar Crane, Forklifts, and Tractor/Trailer during Fall Nuclear Fueling Outage.

07/22/04 to 07/21/05, - Halliburton (KBR) LOGCAP lll, Mosul, Iraq
Position: Heavy Equipment Operator
My Duties: Responsibility to assess each job upon arrival at the job site, supervise rigging crew, and operate cranes, forklifts and any equipment needed to complete the mission. Some missions include: Pour concrete, and erect concrete barriers for force protection. Support the military with recovery of battle damaged equipment on and off the base. Support the transportation department in uploading and downloading equipment, and various construction materials.

05/17/04 to 06/15/04 - W.O. Grubb Crane and Equipment Rental - Richmond, Virginia
Position: Crane Sales
My Duties: Dispatching men and equipment, making calls on customers, size equipment for jobs, quote prices for equipment and projects, prepare lift plans for cranes and rigging jobs, and check jobsite for any hazards before any lifts were made.

01/24/04 to 05/12/04 - Babcock & Wilcox Construction, Inc. @ Virginia Power SCR Project, Chesterfield, Virginia
Position: Lead Crane Operator (Night Shift)
My duties: Supervise all Operators and Drivers, Operate 18000 Manitowoc Crawler Crane (825-Ton) with 380' of Boom, Off Road Cranes, Single and Double Drum Truggers, Forklifts, and Material Elevators when needed.
My duties: Make lifts of over 100,000lbs. @ 200' radius and 200' high during the early am hours due to strong wind conditions. Set equipment, pour concrete, unload materials, and operate Tractor/Trailer to move materials.

04/15/2002 to 01/24/04. U. S. Navy (NSWCDD). Dahlgren, Virginia
Position: Engineering Equipment Operator, WG-5716-11
My Duties:
(1) Explosive Weight Handling Crane Operator:
U.S. Navy License Includes: 120-Ton Mobil Truck Crane, 65-Ton R/T Crane, Bridge Cranes, Boom Truck, Backhoe, Rubber Tire Front End Loader, Crawler Tractor Front End Loader.
(2) Explosive Material Handling Equipment Operator:
U.S. Navy License Includes: Diesel Forklift 20,000lbs. R/T Forklift 6,000lbs. Gas and Electric Forklifts 4-6,000lbs.
(3) Explosive Driver for Tractor/Trailer
(4) U.S. Navy License For Man lifts, Bucket Trucks
(5) Virginia CDL License and Medical Card

Typical duties include loading and unloading of ordnance from boats, barges, gun mounts, and transporting to test sites. Moving heavy material such as gun mounts armor plates to delicate or sensitive equipment as computers and other electronic equipment. Perform rigging duties, and drive trucks or tractor/trailer to move ordnance and equipment to and from test sites. Operate dirt equipment to clear areas dig foundations, pour concrete footers, floors, walls, and snow removal.

07/05/1987 to 04/14/2002-W.O. Grubb Crane and Equipment Rental - Richmond, Virginia
Position: Heavy Equipment Operator/Dispatcher/Sales Representative
My Duties: I started work with W.O. Grubb as a Crane Operator. I operated a variety of cranes and equipment to include: 10 thru 100-ton R/T Cranes; 15 thru 200-Ton Hyd. and Friction Truck and Crawler Cranes. Some duties included unloading and setting equipment, pouring concrete, setting steel, and operate Tractor/Trailer plus rigging duties. 7 years later I was promoted to Dispatcher. My duties included dispatching around 35 to 50 equipment operators for daily work assignments, 25 drivers to pickup and deliver equipment in and out of state, plus order oversize load permits when needed, and take customer service calls. 5 years later I was promoted to Sales Representative. My duties were to make calls on customers, size equipment for jobs, quote prices for projects, prepare rigging lift plans, and check job locations for any hazards before any lifts were made.

1973 to 1075 Corrections Officer, Virginia Department of Corrections

1970 to 1973 U.S. Army, Honorable Discharge

EDUCATION:
2 Year College, Police Science, J Sargent Reynolds CC, Richmond, VA

TRAINING:
6 Year Operator Apprenticeship (Oilier)
U.S. Navy: General Crane Safety Course 40hrs. 5/10/02
General Crane Refresher Course 8hrs. 11/26/02
General Crane Refresher Course 8hrs. 11/05/03
Basics of Naval Explosives Hazard Control (AMMO-18) 40hrs. 10/30/02
Explosive Material Handling Course 10/30/02
Explosive Driver Course 12hrs. 11/15/02

AWARDS: U.S. NAVY
Outstanding Rating 2002/03
Performance Award 2002/03
Group Achievement Award (Pentagon Team Project) 2002/03

LICENSES/CERTIFICATES:
Journeyman Crane Operator License

NCCCO Certification:
Small Hydraulic Cranes to 17-Ton
Large Hydraulic Cranes from 17-Ton and Above
Conventional Truck Cranes
Conventional Crawler Cranes

(CTS) Crane Testing Service, Inc.
2700 Goolsby Ave. Richmond, VA. 23234
Small Hydraulic Cranes to 17-Ton
Large Hydraulic Cranes from 17-Ton and Above
Conventional Truck Cranes
Conventional Crawler Cranes

NCCER Certification:
Mobil Crane Operations V2

U.S. Navy NSWCDD Dahlgren, VA
Explosive Crane Operator
Explosive Material Handling Operator
Explosive Driver
Man lifts
Bucket Trucks

Halliburton KBR, Iraq
60-ton R/T
50-ton Truck Crane
15-ton Carry Deck
6-K thru 30-K forklift
Fluor Construction
200-Ton Overhead Bridge Crane
180-Ton Overhead Polar Crane
65-Ton Terex R/T Crane
55-Ton Grove R/T Crane
15-Ton P&H R/T Crane
8-Ton Boom Truck
8000/30000 Forklift
Tractor/Trailer

Atlantic Group
200-Ton Overhead Bridge Crane
180-Ton Overhead Polar Crane
4100 Manitowoc Crawler Crane
55-Ton Terex R/T Crane
15-Ton Gallion R/T Crane
8000/45000 Forklifts
Tractor/Trailer

Drivers License:
Virginia CDL #T63-44-2076

Medic First Aid:
CPR with AED, Card Expires 12/15/07

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1094)

Go to Search Parameters...

Brief Description

Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.

Contract Safety and Construction Inspector for companies ,such as Conoco Phillips and Shell

Objective: My main objective has always been to construct any job in a timely manner, excellent quality, and safety conscience. I like to work about 20 hours a week overtime, and I feel like I have gone as far with this company as possible.

Over ten-years of progressive experience and responsibility in the areas of Heavy Equipment Operation & Landscaping at various organizational levels

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Experienced frame and finish carpenter with cabinet experience and management experience

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

HVAC Skills

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Caterpillar Dealership, Surface and Undergound Mining Experience.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

Truck Driver/ Construction Superintendent /Customer serves /Quality /Safety Inspector

Looking for a plumbing position overseas

CAD Manager for Microstation and AutoCAD

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

COATING INSPECTOR CV

Instrument Supervisor

I HAVE BEEN INVOLVED WITH EQUIPMENT MAINTAINENCE ALL OF MY LIFE,AG/CONST BACKROUND 10 YEARS HEAVY EQUIPMENT EXPIERENCE 6 AS A FIELD TECH. LOOKING FOR AN OVERSEAS OPP.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Front line supervisor, to train the trainer, mine development jumbo lead hand, OH@S,first aid certificate

Senior Mechanical Draughtsman(MEP)

I have multiple years of mining and heavy equipment operator experience. I am looking for a full time position.

Mechanical Fitter with 8 years of Experience

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have been working in the mine industry for the past 30 years. Recently reassigned to site services for DeBeers Canada Snap Lake Project. Currently gaining experience on the several sizes of Komatsu loaders, Bobcat, Dozers, Water and Fuel Truck.

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Objective: To work for a company as a Supervisor/Foreman/Journeyman carpenter. To use my skills to the best of my ability.

Construction Supervisor for Electrical and Instrumentation

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

welder helper \ carpenters helper

Versatile, knowledgeable, exploration geologist

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out