Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #66289 next resume »»
CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE

March 2007 TO PRESENT Doug Edger SWS/ David Sparinize RDS 475-5559

Municipality Of Saanich- Solid Waste Services/ General Labour

SWS_Garbage pick up, composting station tamping bins with JBC backhoe, leaf collection with packer.
RDS_Hand ditching, machine ditching and shoulder grading with Deere 310sj backhoe, handdigging for main and service gas lines during digouts, machine digouts preping roads for paving, raising castings and cb's preping for paving, waddle fence building, traffic control, small and major patch paving, driving tradom for paving crew, traffic control, backhoe certified through Saanich, snow and ice control course.

NOVEMBER 2006 TO MARCH 2007 Dave Christenson 382-9134

Gorgevale Certigard (Victoria) - First Year Mechanic Apprentice

Oil changes, pre purchase inspections, coolant, engine and trans flushes, motor vacs, brakes (including turning, rotors & drums), axle inspections, replace seals, differential services, gear replacement, mount & balance tires, intake manifold, valve cover, oil pan, trans pan & gasket replacements, AVR tests, replacing starters, alternators, water pumps, power steering pumps and pulleys, wheel alignments and all other duties related to first year apprentices. (Class 1)

NOVEMBER 2005 TO OCTOBER 2006 Yves Guimond (604)261-2211

Ocean Construction Supplies – Driver (Vancouver BC)

Pre/post trip inspections and vehicle upkeep. Deliver concrete in a safe and timely fashion. Tandem-Tandem mixer and trailer mixer. (Class 1)

SEPTEMBER 2004 TO NOVEMBER 2005

Independent Concrete Ltd. – Driver (Victoria BC)

General yard duties, blocks, waler bars, loading bins, etc. Pre/post trip inspections, minor repairs and vehicle maintenance. Single axle, tandem, tandem-tandem mixers, front end loader.

MARCH 2004 – AUGUST 2004

Custom Concrete Pumping – Pump Truck Operator

Pre/post trip inspections, minor-major repair and maintenance. Experienced working line pumps, 23-32-37-43 meter boom pumps. Cash billing, charge invoicing, daily log sheets.

MAY 2001 – MARCH 2004

Totem Towing/BCAA – Driver

Pre/post trip inspections, minor truck maintenance. Experienced with 1-1 ½ ton, wreckers, 2-3 ton flat decks. Roadside repairs, recovery or towing of cars, trucks, vans, motorcycles and scooters. Towing of boats, trailers, man lifts, forklifts, bus engines, sheds, vintage cars and trucks. Cash billings, charge invoicing and daily log sheets.

OTHER EXPERIENCE

Single axle, tandem and tandem-tandem dump trucks,300T-450T articulated rock trucks (80hrs), front-end loader IT28F-950-980-988's (3648 hrs), backhoe-JBC,Deere (228 hrs), bobcat (2822 hrs), Forklift Certificate (180hrs), traffic control certified, snow and ice control course.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 1021)Go to Search Parameters...
Brief Description
Accounts payables, data entry, buyer - willing to learn anything new
Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S
Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati
Competent in Microsoft office 2000 , Turbo C++ , Pspice, Mathcad, Derive, Converge, MathLab, Advanced Design System for Wireless and Microwave, Internet, Fluent in Arabic, English, and French, Occupational safety rules, Marketing and sales skills in the moroccan market
Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Park, great Abington, Cambridge, CBI 6 AL, United Kingdom.
Experinces in welding, mechanical and Rig at an Oil Company, CALTEX. With the latest position as Coordinator. I need a job weets wiith my experiences.
Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.
Municipality Of Saanich- Solid Waste Services/ General Labour
I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.
! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.
I have worked in the mining industry for the last 15 years. I have performed several duties in the operating and maintenance field. As well as supervised crews and trained new employees.
Logistics, Technology, Transport and Management Professional
I have Masters Degree in Geology with experience in Coal Exploration.
Over 14 years of experience with various reputed organizations as Instrumentation & Control Engineer with proven success in the Erection, Installation, commissioning & maintenece of a wide spectrum of Instruments and Process Automation Systems as Yokogawa DCS systems (Centum CS3000, CS3000,
Fitter and Machanist, Rigger, Dogman, JLG, Welding coded, Mining exp (Awarded Apprentice)
Industrial Projects, Purchase, Procurement, Supply Chain Management,Contracts Management,ERP Implementation,Vendor Mgmt, Business Development.,Material Management.
Varied and accomplished background in materials control and logistics.
4.5 years in petro-chem document control: both engineering and construction (Pre-T/A, T/A & Post T/A) phases, being responsible for the governing of drawings, drawing lists, invoices, contracts, engineering standards, construction packages, distributions all management levels
Welding/NDT/QA/QC Inspector
QA/QC Mech.Engineer near about four years exp. in the field of Pipe Mfg.Company,Pipeline & Piping during project execution, construction, commissioning of m/cs, pipeline and piping & system implement, execution and maintaining related to all quality control and assurance dept.
Lead Naval Architect with 5 years FPSO conversion and new building experience
Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)
Licensed fork truck operator
Heavy Equipment Operator
Overhead crane opperater, press cnc machines and forklift training
Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.
Environmental Consultant (Engineer/Scientist)/Geoscientist
NDT Inspector ASNT level II in UT, RT, PT, and MPI
Special Skills: Years of experience in cost-cutting, budgeting, planning and projecting, great communication skills, the ability to work well in and under pressure, team player.Other: Excel, Microsoft word, OSHA
Investigation of electrical documents and scheme in refinery & NGL plants. Simulation files checking in basic & detail design phases.
Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.
Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.
QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and
Mining & construction Equipment, Oil field production, Power generation
Over 12 years experience as an apprentice, technician, service engineer and senior service engineer, of Home Appliances also as a sales executive, procurement of spares both locally and overseas.
ROTATING EQUIPMENT/TECHNICIAN,MAINTENANCE/OVERHAUL OF GTG POWER PLANTS GAS TURBINE PROPELLTIONS&AUXILARIES
Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,
Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.
A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.
29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)
Construction Safety Manager
27 years of mechanical and process engineering
Electrical / mechanical service tech
Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia
Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.
Man of many trades
A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player
I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.
Mechanical Supervisor / Project Manager
911 Paramedic with 10+ years in emergency medicine to include former Army EFMB medic and USAF medical technician.
1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com