Resume - QA/QC Inspector experiences both on client and contractor side, ensuring the ins...

Misco Jobs

Resume #66968

CONTACT INFORMATION:
View contact information...

C a r e e r O b j e c t i v e

To have the opportunity to utilize my acquired skills and knowledge in the field of Electrical Engineering.

E x p e r i e n c e P r o f i l e

More than six 6 years of extensive experience in Construction and Project Management of Industrial facilities like Oil & Gas, Power Plant, Manufacturing Plant, Roads and Buildings. Hardworking person and willing to undergo training if needed. Can work under pressure and can work independently. Fast learner person and can easily adapt in new working environment My leadership and technical skills resulted to a position as E&I Supervisor, I have the ability to coordinate and supervise construction work teams and plan future work programs, liaise between Client and Contractor, know how to assess all risks before commencing work and have safe work practices. Posses also a QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and standards like National Electrical Code (NFPA70), International Electrotechnical Commission (IEC), American Petroleum Institute (API RP 500), knowledgeable about the technical aspects of hazardous area electrical engineering such as basic design, area classification, gas grouping, temperature classification, ingress of protection and types of protection techniques.

Conversant in process variable measurement & control fundamentals, installation of different kinds of instruments and its application and operation, automatic control, distributed control system, instrument calibration procedures and standards. Know how to interpret instrumentation symbols, diagrams and terminologies in P&ID.

W o r k E x p e r i e n c e s

Company: Atlantic, Gulf & Pacific Company of Manila Inc. (AG&P)
Position: E & I Supervisor
Project Name: Re – engineering of Compress Natural Gas (CNG) facilities in
Malampaya Onshore Gas Plant - Modification of piping, electrical and instrumentation system of Microbox and Boosternet to ensure compliance in Shell's technical specifications, including installation of fire water line, potable water line and Fire & Gas System.
Inclusive Date: May 2007 – Up to present

Company: Saipem Contracting Nigeria Limited / Saibos - Dietsmann
Position: QA/QC Inspector (Electrical & Instrumentation)
Project Name: AMENAM / KPONO AMP2 Platform & Bridge and Existing
Facilities Upgrade - Lies within Nigeria offshore operates by Elf Petroleum Nigeria Ltd. (EPNL), consist of Production of Platform AMP2 (adjacent and bridge connected to the existing AMP1 platform) and upgrade of existing facilities in AMP1 platform.
Inclusive Date: September 2006 – December 2006

Company: Parsons Brinckerhoff Philippines Inc.
Position: Electrical Engineer / QC Inspector
Projects Name: Philip Morris Greenfield Project - Construction and Installation of facilities for cigarettes production. (Main Production Building, Annex, Canteen Building, Security Center, Waste Water Treatment Building, Ingredient Storage Building, LPG Storage Area, Water Treatment Building, Diesel Storage Area, Central Plant Building, Diet Building)

North Luzon Expressway Project - Construction of 88 kilometers multi lanes and Buildings ( 9 units of Toll Supervision Bldg., 29 units of Toll Plaza, 18 units of Electrical Service Center Bldg., 20 units of Pumphouse Bldg., 5 units of Point of Sale Bldg., 1 unit of Operation and Management Center Bldg., 1 unit of District Bldg., Interchange Lighting, 33 kms of Roadway Lighting)
Inclusive Date: January 2003 – July 2006

Company: Universal Robina Corporation (BOPP-Packaging Division)
Position: Production Operator
Location: JGSPC complex, Bo. Simlong, Batangas City
Inclusive Date: August 2002 – January 2003

Company: Photocircuits Philippines Inc.
Position: Production Operator
Location: FPIP Sto. Tomas, Batangas
Inclusive Date: August 2000 - October 2001

Company: Sembawang Power Corporation – MIESCOR
Position: PCD Engineer (Electrical/ I&C)
Project Name; Sta. Rita 1000MW Combined Cycle Gas Turbine Power Plant
Inclusive Date: June 1999 - January 2000

Company: Sembawang Power Corporation – MIESCOR
Position: Instrument Fitter
Project Name: Sta. Rita 1000MW Combined Cycle Gas Turbine Power Plant
Inclusive Date: March 1999 - May 1999

Duties and Responsibilities - E&I Supervisor

1.Plan for the deployment and redeployment of resources for timely completion of work.
2.Represent the discipline for frequent review and update meetings with the client to attend to any concerns and also to give an update on the development of work as scheduled.
3.Supervise the team for timely and accurate work execution. Ensure that all the work activities get completed as per the quality norms and as per project specifications.
4.Responsible for determining appropriate supplies and stock levels are maintained to meet functional targets.
5.Coordinate with corporate engineering team to provide inputs on issues/ concerns as and they get raised by the client.
6.Coordinate with other engineering discipline heads at the project site to review the overall progress in work and coordinate with them to assess any hold points that originate from a particular engineering discipline.
7.Directly reporting to project manager regarding status of works.
8.Responsible for establishing, promoting and maintaining a safe and hazard free working environment in complete compliance to safety procedures and practices.

Duties and Responsibilities - Electrical Engineer/ QC Inspector E&I

1.Supervised / Inspect fabrication and installation of junction boxes, conduits, supports and cable trays.
2.Supervised / Inspect pulling and termination of power and instrument cables to the equipment.
3.Conducted / Witnessed Continuity and Insulation Resistance Test of cables.
4.Checked each instrument if it conforms to the required specification at the data sheet.
5.Checked the correctness of the installation of the instruments according to the specific installation drawings.
6.Supervised loop checking from process sensors to controllers, recorders and alarm units.
7.Supervised leak and hydro testing.
8.Supervised/ Inspect installation of Grounding and Lightning Protection System.
9.Conducted / Witnessed Continuity and Earth Resistance Test of Grounding and Lightning Protection System.
10.Supervised/ Inspect installation of equipment according to the manufacturer's recommendation, technical specification, drawings, National Electrical Code (NEC), International Electro technical Commission (IEC).
11.Generation and Closing Out of Punchlist and Non Conformance Report (NCR)
12. Testing and Commissioning of the System (Lighting and Power, ACID, FDAS, FCMS, CCTV, UPS, Generator, Structured Cabling System, FM 200 Fire Suppression System and Intercom).
12.Reviewed the drawing submitted by the contractors.
13.Prepared daily accomplishment and monthly reports.
14.Coordinated and confirmed schedule and sequence of work with other trades.
15.Prepared and secured necessary working permit before actual start of work
16.Directly reported to the MEPF Manager regarding status of works.
17.Ensured the provision of a safe working environment.

Duties and Responsibilities - Project Control Division (Monitoring Engineer)

1.Reviewed manpower loading & scope of work.
2.Reviewed drawing, schedule, bill of quantity, and progress report.
3.Prepared daily accomplishment report, weekly report, and monthly billing.
4.In - charged of material take-off and costing of extra works.
5.Coordinated with the main contractor regarding time sheets for billing.
6.Coordinated with the supervisor, field engineer, and foreman in monitoring status of work.
7.Ensured the provision of a safe working environment.

Duties and Responsibilities - Instrument Fitter

1.Took off material with P&ID, location drawing, hook-up detail drawing and instrument list.
2.Installed pressure gauges, transducers, temperature elements, indicators, level gauges and switches.
3.Installed impulse tubing, process connection, capillary tubing, heat tracing and airline connection.
4.Ensured the provision of a safe working environment.

Duties and Responsibilities - Production Operator

1.Effective operation by monitoring the status, performance and behavior of the machine and ensuring the safety of the operator and the high quality of product produced.
2.Set parameters to computer that is within the standard specifications.
3.Completed assigned task following manufacturing and/or support process.
4.Notified supervisor of problems or changes in process employed.
5.Monitored process performance to ensure process and product attributes meet or exceed internal and external goals or specifications.
6.Maintained clean and orderly job areas.
7.Ensured provision of a safe working environment.

T r a i n i n g

Supervisory Training Seminar
Atlantic, Gulf & Pacific Company of Manila, Inc.
July 9 & 10, 2007

Basic Offshore Safety Induction and Emergency Training (BOSIET)
International Development and Environmental Shipping School
Subic Bay Freeport Zone, Philippines
July 23, 2006 to July 25, 2006

Advanced Instrumentation and Process Control(AIPC)
UP INSTITUTE FOR SMALL-SCALE INDUSTRIES
University of the Philippines Diliman, Quezon City
March 23, 2002 to April 27, 2002

Industrial Instrumentation Training Course
TESDA REGION IV/ I&E INDUSTRIAL SYSTEM SERVICES, INC.
Batangas City
April 21, 2001 to June 17, 2001

On-the-Job Training/Internship
PILIPINAS SHELL PETROLEUM CORPORATION
Tabangao, Batangas City
Instrument/Electrical Section
April 21, 1997 to June 13, 1997

Manufacturing Processes of Printed Circuit Board
PHOTOCIRCUITS CORPORATION
Glen Cove, New York 11542
October 2, 2000 to February 5, 2001

E d u c a t i o n a l A t t a i n m e n t

Graduated with a Degree of BACHELOR OF SCIENCE IN ELECTRICAL ENGINEERING in Batangas State University (formerly Pablo Borbon Memorial Institute of Technology ) April 1998.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1030)

Go to Search Parameters...

Brief Description

Time served mechanical fitter - city and guilds

25 yrs Heavy diesel mechanic in Construction and Pipeline

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

Senior Site Executive Hard Rock Quarry Manager, Mine Supervisor, Operator Trainer Assessor, Multi Skilled Plant Operator

Accounts payables, data entry, buyer - willing to learn anything new

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati

Competent in Microsoft office 2000 , Turbo C++ , Pspice, Mathcad, Derive, Converge, MathLab, Advanced Design System for Wireless and Microwave, Internet, Fluent in Arabic, English, and French, Occupational safety rules, Marketing and sales skills in the moroccan market

Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Park, great Abington, Cambridge, CBI 6 AL, United Kingdom.

Experinces in welding, mechanical and Rig at an Oil Company, CALTEX. With the latest position as Coordinator. I need a job weets wiith my experiences.

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Municipality Of Saanich- Solid Waste Services/ General Labour

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

MBA in marketing with 4 yrs experience

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

I have worked in the mining industry for the last 15 years. I have performed several duties in the operating and maintenance field. As well as supervised crews and trained new employees.

Logistics, Technology, Transport and Management Professional

I have Masters Degree in Geology with experience in Coal Exploration.

Over 14 years of experience with various reputed organizations as Instrumentation & Control Engineer with proven success in the Erection, Installation, commissioning & maintenece of a wide spectrum of Instruments and Process Automation Systems as Yokogawa DCS systems (Centum CS3000, CS3000,

Fitter and Machanist, Rigger, Dogman, JLG, Welding coded, Mining exp (Awarded Apprentice)

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

4.5 years in petro-chem document control: both engineering and construction (Pre-T/A, T/A & Post T/A) phases, being responsible for the governing of drawings, drawing lists, invoices, contracts, engineering standards, construction packages, distributions all management levels

Welding/NDT/QA/QC Inspector

QA/QC Mech.Engineer near about four years exp. in the field of Pipe Mfg.Company,Pipeline & Piping during project execution, construction, commissioning of m/cs, pipeline and piping & system implement, execution and maintaining related to all quality control and assurance dept.

Lead Naval Architect with 5 years FPSO conversion and new building experience

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Licensed fork truck operator

Heavy Equipment Operator

Overhead crane opperater, press cnc machines and forklift training

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Special Skills: Years of experience in cost-cutting, budgeting, planning and projecting, great communication skills, the ability to work well in and under pressure, team player.Other: Excel, Microsoft word, OSHA

Investigation of electrical documents and scheme in refinery & NGL plants. Simulation files checking in basic & detail design phases.

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and

Mining & construction Equipment, Oil field production, Power generation

Over 12 years experience as an apprentice, technician, service engineer and senior service engineer, of Home Appliances also as a sales executive, procurement of spares both locally and overseas.

ROTATING EQUIPMENT/TECHNICIAN,MAINTENANCE/OVERHAUL OF GTG POWER PLANTS GAS TURBINE PROPELLTIONS&AUXILARIES

Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

Construction Safety Manager

27 years of mechanical and process engineering

Electrical / mechanical service tech

Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia

Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.

Man of many trades

A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out