Resume - CAD Designer Project Manager Medical Laboratory HVAC Piping Design JCAHO ASHRE

Misco Jobs

Resume #67662

CONTACT INFORMATION:
View contact information...

Professional Experience:

Environmental Design - (Self Employed) Burlington, NC
Designer - Project Manager Nov '01 - Present
Recently completed the redesign of a corporate campus for Pfizer in LaJolla, CA. This included several newly acquired laboratory buildings adjacent to their original campus design. Worked with showroom designers & contractors to create virtual 3D models & walk through presentations for retrofits of area dealership facades. These modifications were designed with AutoCAD-2007, as well as Autodesk's Architectural Desktop, Land Development Desktop, & Civil 3D software as well as Revit & Viz. All were designed to optimally utilize existing structures and phased so as to have minimal effect on commercial business operations. These retrofits involved field verification & documentation of existing conditions utilizing Critical Path Method software as well as providing updated layouts for fire and insurance purposes. Additional site improvements included revising parking layouts, illumination, landscaping, & traffic flow. This included establishing finish & color selection boards for negotiating cost effective contracts for construction materials. Utilizing conceptual master planning experience with large-scale development projects including single family, multi-family, commercial, office and mixed use projects. Development of Regional Impact studies, comprehensive planning and coordination with current land development codes. Developed expansion plans and architectural drawings for owner and contractor review and permit approval. Coordinated punch-list & inspections to obtain certificates of occupancy or substantial completion while maintaining a focus on preserving the natural environmental features. Created accessible open-areas and walking trails while enhancing existing aquatic features.

LabCorp - Facilities Planning Department Burlington, NC
Project Manager - Systems Administrator Sept.'90 - Nov.'01
Acted as liaison between A&E firms, contractors, and all regulatory agencies. Documented and attained restoration tax credits, grant approvals, geotechnical investigations & evaluations, & wetlands permitting as appropriate. Designed and developed master site plans, landscaping, parking, lighting, traffic pattern migration designs, SAP project schedules. Documented, designed, and supervised installation of HVAC, Clean Rooms built with HEPA filtration systems for JCAHO review and ASHRE Standards, Plumbing, & NICET sprinkler design, ancillary work center designs, and coordinated A&E documents, and administered site planning & environmental landscaping projects & ADA handicap codes utilizing. Forecast and design the requirements of 1500+ medical and laboratory facilities nationwide. Developed and administered IBM's RISC-6000, Microstation, Pro-E, HydroCAD, & Microsoft's Windows based CAD networks. Trained CAD technicians to produce maximum productivity and design efficiency Established and maintained a GIS database encompassing a full range of A&E plans utilizing Accugraph's MountainTop, AutoCAD/LDD Architectural Desktop for Windows & various other Civil, A&E, presentation platforms.

Union Carbide Corporation - Plant Engineering Dept. Asheboro, NC
Senior Mechanical Designer Apr.'78 - Aug.'90
Facilities & Machine Designer in the Plant Engineering Department. Duties included documentation of existing conditions and developing all site improvement and building HVAC & sprinkler expansion plans, developing master site plans, landscaping, parking layouts. Mapping underground utilities and maintaining a GUI database for same. Established a GIS CAD department and implemented an Accugraph ADC800 (Pascal) CAD network. Designed improvements to production equipment and product conveyance systems to facilitate automated production and reduce operating costs. Developed CAD based property and inventory control systems. Assisted project engineers in resolving design problems encountered when updating existing manufacturing equipment.

Myrtle Desk Company - Production & Scheduling Dept. High Point, NC
Special Projects Supervisor July '76 - Mar.'78
Worked with showroom designers and marketing staff to create new modular prototypes of office furniture. This process began with overall design of the products. Then, cut sheets of the individual components with estimated lead times. This also entailed working hands-on with Alderman's Studios on the showroom vignettes and finishing phase before releasing the designs to the showrooms.

Lovette & Bunn, Inc. - Civil Engineering & Land Surveying Raleigh, NC
Senior Draftsman Oct.'72 - July '76
Drew plot plans for loan closings, designed subdivision and land development layouts from surveying field logs, acquisition and excavation design for single family homes, master planned communities infrastructure, water and sewer designs, sedimentation control, and noise abatement plans utilizing landscaped berms and architectural elements.

Education:

N.C.S.U. Raleigh, NC
Environmental Design - Landscape Architecture Dec.'75

IBM Training Center Raleigh, NC
AIX UNIX / RISC 6000 Apr.'91

Comtrex Greensboro, NC
AutoCAD's Architectural Desktop for Windows Oct.'99

Affiliations:

Downtown's Business District's Landscape Committee Burlington, NC
Board Chairman Jan.'94 - Dec.'95

Alamance/Burlington "Partners in Education" program Burlington, NC
Tutor/Mentor Sept.'93 - June '97

Skills:

Pilots License - (Current - 15 years)

Building Customized Computer Systems (A+ Certified)

Designing VR (Virtual Reality) Scale Models & Prototypes

Other:

Passport & International Drivers Permit Status = Current

College SAT Combined Score = 1,297 & Tested I.Q. Rating = 137

Web Link: http://www.4Jobs.Com/RayKimble

Raymond Kimble, III 3919 Quail Run Lane, Burlington, NC 27215
Phone: 336-584-0772 E-Mail: Ray_Kimble@BellSouth.Net

REFERENCES:

Diane Holt
LabCorp
Manager

Phone Number:
336-436-7552

Email Address:
HoltD1@LabCorp.Com

Reference Type:
Professional

Jim Wright
Southern States
Environmental
Engineer

Phone Number:
804-281-1357

Email Address:
Jim.Wright@SSCoop.Com

Reference Type:
Professional

Lisa Church
Carolina Biological
Manager

Phone Number:
800-334-5551

Email Address:
ChurchL@Carolina.Com

Reference Type:
Professional

Salary History/Requirements:

--- Available Upon Request (Negotiable) ---

Raymond Kimble, III 3919 Quail Run Lane, Burlington, NC 27215
Phone: 336-584-0772 E-Mail: Ray_Kimble@BellSouth.Net

Partial Project List:

Key Homes Subdivision - Raleigh, NC (1972)
382-Acre Single Family Subdivision, West of Six Forks Road, in North Raleigh. Deed Research, Field Survey, Boundary Closure, Topographic Survey, & Preliminary Site Plan, & Approval. Street Design, Cut & Fill, Storm Sewer, Sanitary Sewer, & Balanced Water System Design. Individual Lot, Greenway, Outfall, & Maintenance Easement, & Soil Erosion Control Design. Obtain City Planning Department Preliminary Approval Permits.

The Lakes Apartments - Raleigh, NC (1974)
Phased Multi-Family Apartment Community, East of Sandy Fork Road, in North Raleigh.

Landmark Apartments - Raleigh, NC (1975)
Phased Multi-Family Apartment Community, North of Lake Boone Trail, in West Raleigh.

River Bend - Wake County, NC (1976)
520-Ac. Single Family Planned Community, Falls of the Neuse Road, North Wake County.

Union Carbide Corp. (Eveready Battery Company) - Asheboro, NC (1987)
Warehouse Addition & Manufacturing Plant Expansion, Albemarle Road, Asheboro, NC.

Roche Biomedical - Burlington, NC (1993)
Historic Restoration & Renovation Historic Buildings, Downtown, Burlington, NC.

Raymond Kimble, III 3919 Quail Run Lane, Burlington, NC 27215
Phone: 336-584-0772 E-Mail: Ray_Kimble@BellSouth.Net

Roche Biomedical - Burlington, NC (1995)
40-acre addition to the York Court Main Laboratory site near Elon, NC. This addition adjoined the existing property to West Front Street in Burlington. The combined site, approximately 60 +/- acres, included working in conjunction with the Army Corp of Engineers to delineate the wetland portion and adjusting the connector road's alignment so as not to encroach or negatively impact that portion of the site.

Worked with General & Sub Contractors on coordination of site planning, permitting, and landscaping of over 300 Patient Service Center & Regional Laboratory locations in the Eastern US. Much of this was accomplished with minimal interaction of the locally licensed A&E firms.

Studied under the tutelage of Lewis Clark, the renowned landscape architect of the 70's, consulted with historic commission on the grounds maintenance of the Chinqua-Penn estate, and coordinated the design and replanting of municipal landscaping to ensure a contiguous appearance with 'Corporate Campus' landscaping throughout the Downtown Burlington Historic District.

Additionally, as an integral part of the many completed restoration projects, I have accrued an in-depth knowledge of asbestos, lead, and mold/mildew abatement procedures.

LabCorp (former Roche Biomedical) - Burlington, NC (1998)
Post merger with former National Health Laboratories of LaJolla, CA, there existed a duplication of several hundred Patient Service Center and Regional Laboratory sites throughout the US. This began an attrition and recombination project of corporate owned facilities on a national scale the details of which are too involved to be properly presented in this format.

Environmental Design - Burlington, NC (2002)
Working with showroom designers, marketing staff, and contractors to create retrofits of Honda, Mazda, & Ford dealership facades. These modifications were designed to optimally utilize existing structures and phased to have minimal effect on commercial business operations. These retrofits involved field verification & documentation of existing conditions, designing utilizing Critical Path Method (CPM) software, as well as providing updated layouts to the fire and insurance protection. Additional site improvements included revised parking, lighting, landscaping, & traffic flow adjustments. This included 3-D CAD models & walk through presentations. Establishing finish & color selection boards for negotiating cost effective annual contracts for construction materials. Designed residential development additions and architectural drawings for contractor review. Coordinated, owner & inspector assisted, punch-list visits & reviews to obtain certificates of completion. While maintaining a focus on preserving the natural environmental features by specifically creating walking trails & enhancing existing aquatic habitats.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1030)

Go to Search Parameters...

Brief Description

Construction/Mechanical Project Manager and Engineer with over 15 years of experience including recent projects in the construction industry.

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

acad, cad technician, drafter

Heavy Equipment training

9 years operating cranes (stevedoring); 1 year marine construction

I am a welder I can weld arc mig stainless steel tig... ace torch plasma cutter

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

15 years of broad based management experience in diverse development projects. Experienced in planning, execution, monitoring, training, consultative, information dissemination, research analytical and evaluative services in project implementation. Recognized as a gutsy, hardworking and dependable t

I am a journeyman plumber/gasfitter with 22 years experience, with 5 years experience as a facilities maintenance planner. I am looking for variety in my field of experience.

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

Rigging & Heavy Lifting, Computer,Autocad.Microsoft Office Spread Sheets.

Crane Operator/Heavy Equipment Opertor

India if any suitable post for me sent mail

electrician ph.770-969-8211

Experienced equipment operator, mechanic, welder looking for a good company that appreciates skill and commitment.

Pipefitter/Welder with over 10 years experience

Lead Instrumentation Technician

Extensive engineering career featuring over 17 year’s experience. Proven ability to deliver innovative solutions that serve corporate objects, Project Planning, Project Engineering (Instrumentation), Implementation, Construction, Commissioning, startup and process monitoring Petroleum/O&G projects.

Have experience working construction, laborer, dealing with people, and dependable.

I am a qualified Heavy Duty Vehicles driver, Crane Operator as well as a mechanic. I have a vast eperience of 21 years in managing heavy equipments including cranes, Trucks, Trawlers and Bull-Dozers. I had been working working as a workshop incharge in UAE Armed Forces.

boilermaker with fitting and welding experience in mining ,construction and hydraulics

Senior Executive Manager of Operations, Project Manager, Superintendent of Construction

Business Development, Marketing, General Management - Project and Product ( Chemical Engineer + PG Diplima in Export Marketing)

20+ yrs experience surface and DTH

I am a second year electrician. I am legally allowed to work in Canada and the United States. I am looking for work in oil, gas, construction, mining.

Driver, heavy equipment transport, water well rigs(Schramm Rotory) Matinance Michanic, Road construction,

CAD Designer Project Manager Medical Laboratory HVAC Piping Design JCAHO ASHRE

I am woking as Dcoment controller in an International Construction company for the last Two years.

Advanced air diver, subsea construction, wet welding, all aspects of construction, top notch employee.

With 15 years ex-pat experience, I am a well liked individual who can come into any situation and be a team player. Terrific people skills are an asset, which I possess. Welder/ fabrication and repairing heavy equipment from the frozen vastness of Antarctica to Greenland, along with Qatar.

i have 30 years experience in construction,mechanical as a business owner,supervisor,etc,

EXPERIENCED HEALTH/MEDICAL PHYSICIST-ENGINEER-SCIENTIST

Safety Director

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

Diploma or ITI holder who have worked in the maintenance, repairs of Cranes, Tower Cranes

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

Free! „X Continually ascertain and adjust operating parameters regarding more than 375 on-base diesel generators.

Years of experience in security and operation of heavy equipment and all types of motorized equipment

Talented and accomplished in construction background in numerous building, renovation sitesProven ability to carry out some aspect of a project including, scheduling, estimating, site supervision, and consistent of completing projects on time. Familiar with framing, some knowledge of plumbing,

Electrical Installation and Management

I'm looking for a unique job opertunity where i can show what I'm made of and learn as much as possible. I've been to a few shops and have learned alot but have not found quite what i'm looking for. I'm willing to travel or even relocate for the right job

I am a highly skilled, fast, safe and hard working heavy equipment operator.

Construction/Maintenance Superintndent, Mechanical/Civil fields

Experienced Construction Project Management Electrical Engineer/Staff

Mechanic, welder/machinist

i'm a ceritified tower crane operator been in this job for almost 2 years. also got crawler crane competency certificate. fast learner and friendly.

An EXPERIENCED ELECTRICAL ENGINEER with 16+ years experience in Oil & Gas, Power and Desalination plant & Engineering Industries in the areas of Manufacturing, QA/QC, Inspection, Erection, Testing and Commissioning of Electrical Equipments.

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

CSWIP Senior Welding Inspector

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out