Resume - I have 12 years experience with working as a Diesel Fitter Mechanic, I am comple...

Misco Jobs

Resume #67772

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
I am a fully qualified Diesel Fitter with 12 years experience. I obtained my NVQ level 3 in HV mechanical and electronics systems maintenance and repair as part of a 3 year apprenticeship.
------------

OBJECTIVE:
------------
I would like to build my skills and take on new and exciting challenges.
I am looking for a job in Australia is so I can work a few less hours than I work now and enjoy the beauitful weather spending more time with my family. I am looking to earn around $80.000+.
------------

WORK EXPERIENCE:
------------
John.T.Evans Haulage Ltd- Here I completed my 3 year apprenticeship aswell as learning

The maintenance and repair of engines.
The maintenance and repair of transmissions
The maintenance and repair of chassis systems including brakes, streering, suspension and hydraulics.
The maintenance and repair of vehicle and electrical system.
The maintenance and repair of general bodywork including trailers, trailer and body beds, curtain repairs etc.
The maintenance of records necessary to comply with Ministry of Transport requirements.
Every other aspect of vehicle maintenance and repair necessary for you to be considered an time served heavy goods vehicle fitter.

K Jenkins trailer repair specialist here I worked for 3 years improving my trade where I was copletely trusted to work indepently,

Servicing
Maintaining
Fault Finding
Aswell as being on call with the breakdown van.

S&K Haulage here I was employed as 1 of 12 mechanics, I carried out work here individually and as part of a team for 5 years.

Relining clutches engine overhauls
MOT preparation
Every other aspect of making sure vehicles were safe and road worthy.

I am currently employed at Mansel Davies and Son Ltd as I of 3 men running the trailer garage. on occasion I am asked to work in the Truck garage.

Here I use Brake testers (rolling road)
Emission reader (smoke machine).

I have been at this employment since 10th September 2007.

I have learnt over the years to confidently drive the truck and trailer around the premise and on and off pits and ramps.

EDUCATION & CERTIFICATION:
------------
Barry Boys Comprehensive school that I left after sitting my GCSEs, as I was offered an apprenticeship.
Coleg Glan Hafren was the college I did the theory side of my apprenticeship for 3 years.

NVQevel 1,2&3 in key skills units
NVQ Level 3 Vehicle Mechanical and Electronic Systems- Maintenance and Repair (HV).

ADDITIONAL INFORMATION:
------------
I have not yet put in the application for my visa as I am waiting on my skills assessment test results. As I am quite sure there should be no problem with result, I should be in Queensland within 12-18 months.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1030)

Go to Search Parameters...

Brief Description

Deep knowledge in motor engines and auto-eletrical , eletronic Injection , and etc. I've got trade qualification as mechanic and deep background.

I&C Technician with broad experience

Electrician, Air Conditioning & Refrigeration Mechanic with Industrial, Commercial and Residencial Experience, Currently working for an Industrial Switchgear and Automation specialist in the Electrical Industry as a sales engineer.

Instrument Engineer / Supt

Energetic and versatile Quantity Surveyor (QS) with proven expertise, working with an International Airport Construction Company.

Professional Heavy Equipment Operator rated with Class B+, Professional Driver for both cars and Heavy Vehicles, Knowledge in Purchasing, Surveying.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

Water & Wastewater Specialist searching for a challenging position overseas.

Production, Laborer, Auto Detailer, Assembly

34 years in instrumentation industry.

MEng. In Mechanical Engineering,career as a Sales Executive Manager,Capable of using Microsoft Word, Excel, Power Point, also Enterprise Resources Planning SAP R3, Graphic software Adobe Photoshop, Auto CAD. communication,leadership,work in both team-oriented and self-directed environments

Open Crane Operator and Advanced Rigger

Dynamic, self motivated and team player

Qualified Electrician,with 15 years experience.

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Overall manager for M&E services on a large high school, including 2 boiler houses, heating, hot and cold water, gas, electrical & electronics, and directional drilling.

Welder looking for immediate full time position

Excavator operator ,matric pass, 2 years of experience

Professional Contract Chef / EMR Available

Experienced concrete superintendent

Advanced British CITB scaffolder / Supervisor / Foreman-16 years exp

I inspect equiptment for faults & malfunctions, determine repairs required, do the repairs required and test them.

A dedicated worker who is able to solve on job problems and leads the team with motivation

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Paramedic with urban/rural/industrial experience.

I can work as a carpenter, mason, cleaner (territories and premises), car driver and assist in other jobs.

Besic Welding Diploma HOlds 2 position stick SMAW and 1 position flux core tickets from Canadian Welding Bureau Certification....WHMIS, Fall Protection, confined space entry, hoisting and Rigging , forklift ticket, occupational health and safety, hydrogen sulfide (h2s) , CPR,

I have 12 years experience with working as a Diesel Fitter Mechanic, I am completly confident with working indepently or as part of a team. I have a certificate in HV mechanical & Electronic Systems, Maintenance and Repair.

Millwright/Industrial mechanic and industrial construction mauntenance mechanic

industrial instrument mechanic/building automation

I want to find work Overseas in the Tower Construction Field.

An experienced Rig Mechanic with high level knowledge on Mining industry

Installation, maintenance and repair of medical equipments

NACE-USA Certified Senior Corrosion Technologist & MICorr grading from Institute of Corrosion-UK, having 19years work experience in Cathodic Protection Technology Services & Corrosion Control Services is available for employment.

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Instrumentation Technician/Trainer/QA/QC

Installation, Maintenance, and Repair, Multi Site Cosmetic/Maintenance, Equipment Operators

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Excavator operator / loader

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Multi-skilled engineer

testing, commissioning, construction and maintenance

BGAS Certified Painting Inspector Grade -2 & Civil Eng. Diploma Holder working as Painting/Civil Inspector, with more than 18 years Exp. in the Engineering/ Construction Oil & Gas field & Industrial construction. My principle activities are Quality Controlling 'Inspection monitoring & Supervision

Instituteof management Diploma, NVQ management level 4, Certificate of professional competence national & international road haulage, Confined space certificate of competence,CITB health & safety certificate, Excavators, Loading shovel, Dumper Trucks, Road rollers, HGV1 licence

Experienced Ops Engineer

“Specialist in material management with a reputation of extraordinary retention level”

Drafter

Sales, Engineering Project Manager

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out