Resume - Experienced electrical contractor, foreman, and electrician, with expertise in m...

Misco Jobs

Resume #68262

CONTACT INFORMATION:
View contact information...

Experience

Electric Foreman, Raytheon Polar Services, McMurdo Station, Antarctica 2-07 to 8-07
Worked on construction of new power plant.

High Voltage Electrician, Readiness Management Support, Iraq 8-06 to 1-07
Installation, repair, and maintenance of base electrical systems, including wiring and switch gear, up to 4160V 60HZ and 11KV 50 HZ.

Electrical Foreman, Raytheon Polar Services, McMurdo Station, Antarctica 2-06 to 8-06
Duties: Oversee installation and repair of electrical requirements on station including general maintenance and repair of lighting, boilers, generators, and DDC systems. Installation and repair of UPS systems, VFDs, ATSs, panels, switch gear and transformers up to 4160V. Set-up and maintenance of airfield lighting. Responsible for ordering electrical materials and tools, writing performance evaluations for employees, and weekly reports. Provided CAD drawings for several installations.

Electrical Foreman, Raytheon Polar Services, South Pole Station, Antarctica 11-05 to 2-06
Worked on construction of new elevated station. Duties: As stated above.

Electrical Foreman, Raytheon Polar Services, McMurdo Station, Antarctica 2-05 to 8-05
Duties: As stated above.

Electrician, RPSC, South Pole Station, Antarctica 12-04 to 2-05
Duties: Same as above in the capacity of Journeyman Electrician.

Electrician, RPSC, McMurdo Station, WWTP Project 8-02 to 11-02
Duties: New construction of waste water treatment facility. Installed power distribution MCC, panels, conduits, controls, and general wiring and lighting.

Field Service Engineer, Seyi America Inc. 5-01 to 6-02
Installation, and repair of metal stamping machines (up to 1200 ton) and associated controls and safeties throughout the US, Taiwan, and Mexico.

Self-employed Electrical Contractor, South State Electric Co., Charlotte NC. 8-87 to Present
Specialize in machine installations/repairs, and industrial controls, primarily in the metal stamping industry. Installed dust collection systems, boilers, and air filtration systems. Experience with the design, construction, and installation of many control panels and systems for industry for many different applications. Experience with bridge crane installation, repair, and maintenance. Electrical contractor for construction of cashmere and camel wool processing facility in Ulan Bator, Mongolia. Power distribution, controls, lighting, and installation and start-up of all machines.

Education/Certifications/Licenses
North Carolina Electrical Contractors License # 13504-L. Matthew A. Miller, South State Electric Co.

References: Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1032)

Go to Search Parameters...

Brief Description

A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

Time served mechanical fitter - city and guilds

25 yrs Heavy diesel mechanic in Construction and Pipeline

Five (5) years of electrical engineering work experience of which engaged in oil, gas, and water construction and rehabilitation. Electrical, Cathodic Protection and Instrumentation design verification and implementation of work procedure. To assure that all electrical activities were done in accord

Senior Site Executive Hard Rock Quarry Manager, Mine Supervisor, Operator Trainer Assessor, Multi Skilled Plant Operator

Accounts payables, data entry, buyer - willing to learn anything new

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati

Competent in Microsoft office 2000 , Turbo C++ , Pspice, Mathcad, Derive, Converge, MathLab, Advanced Design System for Wireless and Microwave, Internet, Fluent in Arabic, English, and French, Occupational safety rules, Marketing and sales skills in the moroccan market

Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Park, great Abington, Cambridge, CBI 6 AL, United Kingdom.

Experinces in welding, mechanical and Rig at an Oil Company, CALTEX. With the latest position as Coordinator. I need a job weets wiith my experiences.

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Municipality Of Saanich- Solid Waste Services/ General Labour

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

MBA in marketing with 4 yrs experience

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

I have worked in the mining industry for the last 15 years. I have performed several duties in the operating and maintenance field. As well as supervised crews and trained new employees.

Logistics, Technology, Transport and Management Professional

I have Masters Degree in Geology with experience in Coal Exploration.

Over 14 years of experience with various reputed organizations as Instrumentation & Control Engineer with proven success in the Erection, Installation, commissioning & maintenece of a wide spectrum of Instruments and Process Automation Systems as Yokogawa DCS systems (Centum CS3000, CS3000,

Fitter and Machanist, Rigger, Dogman, JLG, Welding coded, Mining exp (Awarded Apprentice)

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

4.5 years in petro-chem document control: both engineering and construction (Pre-T/A, T/A & Post T/A) phases, being responsible for the governing of drawings, drawing lists, invoices, contracts, engineering standards, construction packages, distributions all management levels

Welding/NDT/QA/QC Inspector

QA/QC Mech.Engineer near about four years exp. in the field of Pipe Mfg.Company,Pipeline & Piping during project execution, construction, commissioning of m/cs, pipeline and piping & system implement, execution and maintaining related to all quality control and assurance dept.

Lead Naval Architect with 5 years FPSO conversion and new building experience

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Licensed fork truck operator

Heavy Equipment Operator

Overhead crane opperater, press cnc machines and forklift training

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Special Skills: Years of experience in cost-cutting, budgeting, planning and projecting, great communication skills, the ability to work well in and under pressure, team player.Other: Excel, Microsoft word, OSHA

Investigation of electrical documents and scheme in refinery & NGL plants. Simulation files checking in basic & detail design phases.

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and

Mining & construction Equipment, Oil field production, Power generation

Over 12 years experience as an apprentice, technician, service engineer and senior service engineer, of Home Appliances also as a sales executive, procurement of spares both locally and overseas.

ROTATING EQUIPMENT/TECHNICIAN,MAINTENANCE/OVERHAUL OF GTG POWER PLANTS GAS TURBINE PROPELLTIONS&AUXILARIES

Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

Construction Safety Manager

27 years of mechanical and process engineering

Electrical / mechanical service tech

Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia

Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out