Resume - Industrial electrician

Misco Jobs

Resume #69444

CONTACT INFORMATION:
View contact information...

INDUSTRIAL TECHNICIAN

MAJOR IN ELECTRICAL TECHNOLOGY

OBJECTIVE: To acquire a well-suited position that will enhance my capabilities in actual practice and will boost my technical knowledge and abilities in a competitive company dealing with electronics, electrical and general manufacturing.

STATEMENT OF QUALIFICATIONS:

- Able to read and interpret electrical and electronic designs and specifications
- Knowledge in advance and modern electrical/electronic applications such as control and automation
- Performs Troubleshooting of electrical and electronic device and components
- Familiar and can operate industrial machines such as Computer Numerical Control Lathe (Tsugami, Fanuc and Citizen), Compression and Injection Machines.
- Knowledge in PREVENTIVE MAINTENANCE, Planning and Organization
Of process and procedures.
- Able to lead and perform supervisory responsibilities acquired thru trainings and field experiences
- Able to plan and initiate studies to reduced cost to boost profitability
- With knowledge in QIP standards involving qualification testing and calibration
- Able to work on/and understand ISO 9001 QMS and ISO 14001 EMS requirements and performs internal auditing acquired thru trainings
- Able to handle hazardous chemicals and initiate emergency actions
- Able to conduct budget monitoring and utilization and control
- Can work with minimum supervisions
- Able to observe safety practices in a hazardous working environment
- Honest, Hardworking and flexible
- Fast learner and Values motivated
- Computer Literate

WORKING EXPERIENCES:

Company: Al Khalefa factory for metal industry (RIYADH)
September 2000 to present

Position: Maintenance Technician (Electrical, Electronics,Mechanical, and Chemical)

Nature of Work:
- In-charge of over-all plant facilities maintenance
- Design and improvement for new products
- Coordination with suppliers of machines for countinous efficiency of equipments.
- Purchasing of Maintenance supplies and consumables.
- Supervising trainee for production and technicians.
- In-charge of countinous maintenance activities and improvements

Company: FDM TOOLS
August 2004 to June 2005

Position: Field Sales Technician

Nature of Work:
- In- Charge of After sales repair and replacement of consumable materials.
- Attending service calls for consumer seeking for product assistance.
- Training In-charge for company technicians for proper use of consumables.
- Advertise new products thru demonstrations and seminars.

Company: SANKYO SEIKI PHILIPPINES MFG. CORP. (SBMA)
July 2002 to August 2004

Position: Technician 1(Engineering Maintenance) July 2002

Nature of Work:
- Performed preventive maintenance and repair of production machines such as
CNC, BNC, EDM, BARREL, COATING, WASHING, U-SONIC, TAPPING, STAMPING, DIE CASTING, BLASTING and numerous modern equipment used in production lines.
- Performed calibration of several measuring and inspection equipments.
- Monitored machine efficiency and restructured maintenance to simplest effective organization.
- Undergone several trainings and also conducted trainings among co-workers with several past learning's and work experiences.
- Assigned as department representative for safety committee, ISO 9001 QMS development and ISO 14001 EMS development
- Developed a well systemized and effective scheduling of machine preventive maintenance.
- Handled 10 technicians in six months after regularization.
- Handled fabrication and repair machines such as LATHE, MILLING and SURFACE GRINDING Machines

Position: Technician 2 (Leader, Engineering Maintenance) February 2003

Nature of Work:
- Assigned as Tool Qualification and Control
- Inspected PCD and Natural Diamond Tools before issuance to line.
- Actually Test cutting tools and formulate parameter adjustment to minimize machine downtime.
- Contacted various suppliers to have options in quality pricing and delivery.
- Coordinated with Japanese counterpart for continual support and coordination in tool inspection and design
- Entrusted to handle confidential Designs and drafts of tool drawings.
- Localized expensive items which can be acquired at lower cost.
- Handled 5 skilled Technician
- Undergone training in handling UNIVERSAL TOOL GRINDING MACHINE to contribute and develop in-house bit grinding.

Position: Sr.Leader (Engineering Control Dept.) August 2003

Nature of Work:
- Assigned to Lead and Handle Parts Tool Control
- Monitor Budgeting and line expenses based on formulated database linking
All consumption to attain cost per piece of a finished unit.
- Direct reporting to Sr. Manager on Production Consumption and target results
On expenses versus line output to indicate loss or gain in the department
- Localized all consumables to reduced importing cost and minimized lead time

Company: RCM Manufacturing Corp. (SBMA)
November 1999- June 2000

Position: Lead Trainee/ Asst. to Engineering and Maintenance Supervisor

Nature of Work:
- Performed Supervisory responsibility among co-trainees
- Undergone and conducted production lectures and trainings
- Maintained assembly and molding machines and sophisticated industrial machines involved in manufacturing of medical mask.
- Maintained Electrical and electronic control devices
- Maintained Centralized HVAC
- Designed and Installed security cameras, door sensors and Line activated entrance
- Trained to reorganize and modified production techniques to its simplest effective form
- Assigned as department purchaser for supplies and materials
- Conducted Inventories on supplies and materials
- Monitored production related problems and initiate corrective plans
- Prepared department weekly reports of Engineering and Maintenance
- Installed intercom and LAN lines for communications and networking
- Trained in fire fighting techniques
- Installed High Voltage Generator

Company: National Power Corporation
Masinloc Coal-Fire Thermal Plant

Position: Student Trainee
Electrical Division

Nature of Work:
- Analyzed and modified Japanese Standard circuitries to local standards
- Performed Power Generation Maintenance
- Repaired and Maintained Circuitries involving power generation control
- Performed Gauge and Monitor Check-ups
- Installed Sophisticated equipment issued by Mitsubishi Heavy Industries
- Performed Radio Control during maintenance procedures inside the generation room
- Designed building and power system distribution under the supervision of Mitsubishi Heavy Industries Limited
- Filed Important Records and documentation for references
- Coordinated with NPC senior officers to ensure that assigned task and SOP's are followed

Company: Department of Interior and Local Government

Position: Elected Official

Nature of Work:
- Assigned as Council Treasurer
- Conducted Information drives and counseling
- Submitted resolutions for improvement and development of youth oriented activities.

EDUCATION:
Scholar at Meralco Foundation Institute –Olongapo City Campus
June 1997-March 2000
INDUSTRIAL TECHNICIAN MAJOR IN ELECTRICAL TECHNOLOGY

PERSONAL INFORMATION:
Age:…………………………………………………..27
Sex:…………………………………………………..Male
Date of Birth:………………………………………...December 25, 1980
Place of Birth:………………………………………..Sta. Cruz, Zambales
Civil Status:………………………………………….Married
Religion:……………………………………………..ISLAM
Nationality:…………………………………………..Filipino
Height/Weight:……………………………………....172 cm. /75 kg.
Languages Written /Spoken…………………………English,Tagalog,Zambal

CHARACTER REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1021)

Go to Search Parameters...

Brief Description

Terminating, Conduit Work, Cable Running; Tool Work, Managing & Training Personnel

Civil Engineer

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

I am a hard worker who is able to perform a large range of projects in the field of construction work, am skilled in basic electrical and plumbing repairs, and in the use of power tools, I am looking for a long term position, and am very interested in a fly-in fly-out arrangement.

Management , strategic management , marketing +EXPERIENCED PAINTER !!!

IT & Technical Facility Project Manager, Systems / Application Design, Development, Deployment, and Integration Manager - Data Centers, Contact/Call Centers, Hospitals, Renewable Energy Sources and Systems, "Green" Engineering/Construction, Clean Energy Technology, Energy Managment Systems / BAS

Responsibilities include the supervision of teams involved with the installation, repair and maintenance of Wellhead's, Xmas Tree Valves and associated pressure control equipment within the Oil & Gas industry.

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Instrumentation Supervisor

Sr. Health & Safety Engineer - OHS Procedures, Training, Inspection, Audit; HSE Plan, Objectives, Matrix etc.

Detail oriented Instrument and Controls technician seeking international opportunities

Industrial electrician

Pro-E, Unigraphics, Solidworks,A utocad

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Sdw

A Dedicated Occupational Health & Safety Professional and Certified Safety Trainer

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Office Programs, Internet Programs, Programming Languages, high communication, hard worker, analytical and researching.

Hving nearly 8 years experience in the continuous Petrochemical, Fertilizer plants and

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Livelink Administrator, Causeway Collboration Administrator

Highly motivated, creative and an energetic self starter. Ability to work effectively with others as well as within a foreign environment with limited resources. Committed to the highest level of professional and personal excellence.

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

6 years in pipelineing and running heavy equipment

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

cnc edm machinist over 8 years of experience

geological,geotechnical and hydroegeologiacl investigations

Technical Writer / Editor and Proposal Writer

Various skills including, sheetmetal work, piping, brazing

6 years Health and Safety experience and training.

Engineering Professional

Instrumentation and Controls Engineer

Mechanical Engineer with excellent interpersonal and computer skills, a strong supervisor able to train and motivate teams to peak performance.

Having 11 years experience in electronic, electrical and mechanical system and instrument related breakdowns, up gradation and project work as a technician. Recently get Australian Permanent residential visa on 3 rd Feb 2008.

I bring assorted skills to any position. I have a degree in Mechanical but have been in a Civil environment for the past few years. I also have field work experience. In addition, I have a strong computer background.

Worked in the production of oil in the Gulf of Mexico for 2 years. Managed a five man crew in the installation of Flow lines as a contractor for Exxon Mobile. Also held a crane operators license which has now expired. I also have an extensive background in communications. Have a valid Passport.

More than 10 years of experience in senior positions as Financial controller /company secretary in various reputed companies including external role as consulting company secretary/financial consultant.

Mining engineer with special passion for drill and blast operations but experience of many aspects of contemporary mining/rockworks operations. International experience and excellent language skills.

10 years Experience (Process Instrumentation & control sys. Engineer) at chemical industries (Hazardous area) and water treatment projects-Installation, testing, commissioning, operation, monitoring, modifying & maintenance for new projects-Check & review vendor proposals, doc. & drawings

4 years of experince in electrical maintanence related with energy management

Overall my known skills cover the realm from operating sophisticated computer equipment, data modeling and statistical programs, as well as, more traditional work related skills. From builing and designing landscapes and homes, to construction of reclaimed habitat, I have a varied skill set.

Safety Representative.

Working for about 9 years with multinational construction companies and consultancy firms in large scale international projects is my solid base upon which I became a Professional Civil Engineer. Aware by Quality and Safety Management Systems, Civil Engineering International Codes and standards.

Having exp. in fabrication, workshop (100tonpower press) components production, fabrication of structures, industrial sheds as per drawing (supervision of the work), greenhouses components designing for dies, manufacturing erection (100% nut, bolt system), confident in any work, since 12 years

Several years experience in the electrical and electronic field. Experienced in installing, troubleshooting and repairing electrical and electronic units. Maintained and serviced Telecommunication systems and Data communication equipment.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out