Resume - Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Par...

Misco Jobs

Resume #69631

CONTACT INFORMATION:
View contact information...

Place and Date of Birth: Malang, September 29th, 1974
Gender: Male
Marital Status: Married with 2 child
Nationality: Indonesia
Passport no: AJ 175533
Language capability: English (oral and written)
Indonesia

QUALIFICATION

* Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Park, great Abington, Cambridge, CBI 6 AL, United Kingdom.
* Painting Inspector grade 2 certified BGas-CSWIP with certificate No 28852. TWI, Granta Park, Great Abington, Cambridge, C.B.I 6 AL. United Kingdom.
* PCN level 2 with Certificate No 301597, conducted by MINDT Training and certification Sdn.Bhd. Kuala Lumpur, Malaysia.
* Radiography interpreter (RI) ASNT level II with certificate no 367/RI-II/SIVA/2006. Examiner by Mr. A.Sivagnanam ASNT Level III. Conducted in Association with APITINDO, MIGAS and DISNAKER, In IKBAL- M- YOS, Batam Island, Indonesia.
* Welding Inspector Certified MIGAS, with certificate no 049/WI-III/V/2003. Conducted in Association with APITINDO, MIGAS and DISNAKER, and IKBAL- M- YOS, Batam Island, Indonesia.
* Bachelor Degree (S1). Universitas Negeri Lampung. Indonesia.
* Familiar and experiences with computer program Microsoft word, excel and AutoCAD 2000.
* Familiar experiences with API 1104, API RP 2A, API RP 2B, AWS D1.1, ASME, ASTM, ANSI, NACE, and Specifications

PROFILE:

Since 1998 until present has been involved and exist in steel construction, welding process, painting and coating, quality control, inspection, examination and testing including pre-fabrication, fabrication, erection and load out oil and gas platform, pipeline, jacket, deck and appurtenances. Familiar and experience on interpretation of international standard such as (ASME, ASTM, AWS, ANSI, API, NACE, and ABS), specifications, and procedures.

Understand of sequences for both fabrication and installation including pre-commissioning/commissioning prior to star up at onshore/offshore, and refinery project. Work under pressure flexible on duties to perform accept responsibility work long hour committed to going extra mile to completed job correctly on time work well as team player/have worked on own/prepared to work in busy and isolated area. Have Strong skill level, supervision, inspection, technical problem solving all QA/QC including technical problem, Interpersonal skills, particular the ability to listen and understand co-worker, customer/client problem and point of view. Understand quality management system and always committed to being professional in work displaying at all time.

COURSE, TRAINING ATTENDANCE:
* January 15 ~ 20 2007, PCN welding Inspector level 2 course and certification. Conducted by MINDT Training and certification Sdn.Bhd. Kuala Lumpur, Malaysia
* January 05 ~13 2007, Painting Inspector B Gas course and certification. Conducted by TWI training and certification (S.E.Asia) Sdn.Bhd, Malaysia.
* April 20, 2006, Radiography interpreter ASNT level II" Training and certification". Conducted by Yayasan IKBAL M Yos. Batam Island. Indonesia. Pass examination; certificate no 367/RI-II/SIVA/2006.
* Sept 5 ~ 11, 2005, Welding Inspector CSWIP 3.1. "Training and certification" By TWI training and certification (S.E.Asia) Sdn.Bhd, Batam Island, Indonesia. Pass examination, certificate no 21379.
* Feb 05, 2005. "PT Patra Fabrikasi HSE Training in house". Patra Fabrikasi, Batam Island, Indonesia.
* June 13, 2004 ~ September 13, 2004 "English Conversation Courses and Certificate". Putera Batam, Batam Island, Indonesia.
* ISO 9001 ¡V2000 Training. PT.Patra Fabrikasi in June 15 ~ 22, 2004. Batam Island, Indonesia.
* January 15, 2003 - May 20, 2003 "Welding Inspector Course and Certificate". Conducted in Association with APITINDO, MIGAS and DISNAKER, In IKBAL- M- YOS, Batam Island, Indonesia. Certificate no 049/WI-III/V/2003.
* November 10, 2002, "Quality Management System (seminar)" PT Citra Tubindo Tbk. Kabil, Batam Island, Indonesia.
* January 5, 2000, "Piping and Structure Drawing for Fitter Training" VICO INDONESIA, East Kalimantan, Indonesia.
* Marc 20, 1999, "Training Hot Tap Operator "VICO INDONESIA. East Kalimantan, Indonesia.
* January 15, 1999, "Training and Welder Qualification Test and Certificate". Cooperative VICO INDONESIA with MIGAS, East Kalimantan, Indonesia.
WORKING EXPERIENCES:

1. Pearl Oil/CUEL Ltd Thailand. November 2007 ~ February 2008. Ban yen A and Jasmine Phase 3 Pipeline and platform installation project. Offshore Thailand.

Job Title: Senior Inspector

Job Description:
Supervision, monitoring, and inspection all activities of pipeline and platform installation as per code, standard, specifications and procedures, this will include checking and monitoring welding activities, non destructive testing (UT, MPI, RT), coating heat shrink sleeve (HSS), drawing, and review QA/QC document and procedure before installation of pipeline and platform and ensure correct implementation.

2. Conoco Philips for SU TU FIELD DEVELOPMENT PROJECT-SU TU VANG. August 2007~November 2007. Air Cooled Heat Exchangers, production gas cooler, stage discharge cooler, IP gas cooler and heating medium trim cooler. Fabricated on PT SBS, Cikande, West Java, Indonesia.

Job Title: Resident Inspector

Job description
To ensure that all activities of air coolers heat exchanger fabrication complied with code, standard, specification. Its will include reviewing, approval, inspection, monitoring, verification and checking a number of operations including: specifications, quality manual, project procedure, drawing, material and certificate, welding procedure, welder certificate, welding consumable and certificate, fit up and dimensional, welding process, NDT (non destructive test) report, including painting and coating inspection, until completed manufacturing data report/dossier.

3. Saipem Malaysia Sdn Bhd for Carigali Hess. May 2007~August 2007. Transportation, installation of jacket, top side, riser of BMA, BLA, SYA field development project, Malaysia and Thailand offshore.

Job title: QA/QC Painting/welding Inspector

Job description
„X Preparation of weld maps, NDT maps drawing.
„X Checking and Inspection of painting/coating process as per approved procedure.
„X Preparation of procedure qualification test of painting/coating system
„X Final inspection and visual check after completed of painting/coating.
„X Review certificate and calibration of equipments and consumables. Ensure that be used still valid.
„X Interpretation and implementation of Inspection requirements, NDT requirements and acceptance criteria for the project.
„X Carry out weld visual inspection after completed welding as per code and specification.
„X Prepare weld visual inspection reports and co-ordinate with NDT sub-contractor for arrangements for NDT.
„X Review UT, RT, MT and any other NDT reports and approve the same.
„X Keep a track of the progress on NDT joints for acceptance by the client.
„X Ensure that all the joints marked for repair in NDT are repaired and retested in NDT as per original acceptance criteria.
„X Check and monitor of welding techniques, process variables affecting weld quality and monitor in process welding.
„X Ensure that all touch up points marked for rectifications are attended and MPI tested.
„X Issue NCR on Fabrication department when the work quality is substandard or below the required quality and ensure that the corrective action is implemented before close-out of NCR.
„X Assist Welding Engineer in conducting Welding Procedure Qualification and Welder Qualification tests, when required.
„X Prepare all QC inspection report, compiles, for compliance dozier.
.

4. Leighton (Malaysia) Sdn Bhd for Woorley Persons. March 2007 ~ May 2007. Diversion of submarine Pipeline between Pasir Panjang and Pulau Bukom offshore Project, Singapore.

Job Title: QA/QC Coating /Welding Inspector

Job Description:
„X Supervision, conduct the welding procedure specification and welder test as per code and specifications
„X Carry out inspection on material identification and verification. Review relevant mill certificate and ensure the material type and classification.
„X Carry out inspection on coating, before, during and after application.
„X To review of document such as WPQT, WQT, WPS and all procedure of the project.
„X To ensure that welding parameter are being followed and carried out by welders qualified to relevant welding procedure.
„X Perform inspection of in process goods such as dimensional and fit up check, visual inspection, arrange for non destructive examination and monitoring.
„X Assist in the development and maintenance of company system.
„X Preparation of final documentation and summary report sheets and lease out for representative.

5. PT Survindo Dwi Putra.. February 2006 ¡V Feb 2007. It is one of independent surveyor, engineering appraisal, verification and certification company services. In charge at NIPPON STEEL BATAM for Total Indonesia Sisi Nubi project Phase 1,

Job Title: Certified Authority (CA) /Third party Inspector

Job Description:

Behalf from DITJEN MIGAS (department of oil and gas Indonesia).To ensure that all activities of platforms (jacket, pile and deck) fabrication comply with code, standard, specification and Indonesia regulation. Its will include reviewing, approval, monitoring, verification and checking a number of operations including: specifications, quality manual, project procedure, drawing, material and certificate, welding procedure, welder certificate, welding consumable and certificate, fit up and dimensional, welding process, leak test, loading and sea fastening, NDT (non destructive test) report, including painting and coating inspection, offshore installation until manufacturing data report/dossier.

Project Involved:

Total E&P Indonesia (TEPI). Sisinubi Phase1 Project, Manifold Wellhead Platform MWP-N, WPN2, and MWP-S, Sisi and Nubi Island, East Kalimantan. Indonesia. The location of fabrication is at Nippon Steel Batam (NSB).

6. JGC (Japan Gasoline Company) Cooperation. August 2005- February 2006. Tuban. East Java. JGC Cooperation is engineering and construction services as main contractor of Trans Pacific Petrochemical Indotama (TPPI).

Job Title: Piping Inspector

Job Description:
„X To ensure that all fabrication and assembly followed specification and to arise punch list if any noncompliance with requirement.
„X To follow up punch list that being done and closing punch list after completed and meet requirement (including expeditor).
„X Review document before hydrostatic test (including expeditor).
„X Pipeline check and inspection.
„X Visual check of welding and painting on piping and structural refinery plant
„X Steam tracing line check and inspection.
„X Monitoring and inspection of painting and welding process of piping and structure refinery plant.

Project involved:

Tuban Aromatics Facility (refinery) Project for PT. Trans Pacific Petrochemical Indotama (TPPI). Tuban, East Java. Indonesia.

7. PT. PATRA Fab. February 2004 ¡V August 2005, Batu Ampar, Batam. PT PATRA Fabrication is one of Fabrication Company with product Boiler, pressure vessel, cooler, heater, structure and other product oil and gas equipment.

Job Title: QC INSPECTOR

Job Description:
„X Prepare and Review document before, during and after Project completed.
„X To review welding map.
„X Prepare and review paint system as per requirement and services
„X Welding and painting inspection before, during and after complete fabrication.
„X Dimensional control when marking, after cutting, fit up until final dimensional.
„X Monitoring shipping when provide deliver until completed.
„X To control and monitoring NDT (non destructive test).
„X Prepare and arrangement manufacturing data report and release certificate that fabrication met and followed code and specification required.
„X To make sure the product result meeting with quality requirements.
„X Material survey and inspection, so when material received good condition and meeting code and specification required (accepted).
„X Iso 9000, internal audit perform.

Projects Involved:
Structure of pull in Frame, Module, for Petro Brass. Brazil.
- Power Fluid Conditioning Units. Vertical and Horizontal Pressure Vessel. Perkasa Equatorial Sembakung LTD. Elnusa Petro Teknik.
- Cooler for Betara Complex Development Jabung. Jord International Petrochina International Jabung. Quantity cooler are 64 units.
- Hot oil Heater for Born Heater Canada. Betara Complex Development Jabung. Petrochina International Jabung. Qty 2 units.
- Separator and Reservoir Vessel. Citrayala. Elnusa Petro Teknik. Equatorial Sembakung. East Kalimantan. Indonesia.
- Cooler for Otway Gas Project Onshore Gas Plant. Jord International for Technip for Woodside Energy LTD. Qty 14 units.
- Hot oil Heater for NACAP MORLEY / PTT. Rayong Thailand. Qty 1 unit.
- Calm Buoy. Tuban Aromatic Project. Bluewater Energy Services (BES), for TPPI. Qty 1 unit.

8. PT. TRANSALINDO EKA PERSADA. June 2003 - February 2004, Batu Ampar, Batam. PT Transalindo Eka Persada is engineering and manufacturing of boiler, pressure vessel, piping and structural Manufacture services.

Job Title: Quality Control Inspector

Job description:
„X Inspect incoming raw material compared to the drawing requirement.
„X Review and check the construction drawing prior to fabrication.
„X Material identification, visual and dimensional checks for conformance result.
„X Identification and transfer heat number.
„X Dimension check before welding.
„X Review welding map prior to fabrication.
„X Prepare material trace ability, welding summary and final dimensional report.
„X Coordinate the NDT (non destructive test) process.
„X Prepare the document and activities for hydro test and leak test.
„X Prepare Manufacturing Data Report (MDR) and UIA for pressure vessel.
„X Internal audit document (daily report, summary report and files).

Projects Involved:
- South Jambi "B" Project Phase 3 Gas Plant Expansion, pipe rack, piping system. PT Istana Karang Laut for Petrochina International Jabung ltd,
- South Jambi Project Phase 3 Gas plant expansions, Skid #3# of Gas Pipeline Flow Control, PT. Istana Karang Laut for Petrochina International Jabung ltd.
- South Jambi Project Phase 3 Gas plant expansions, condensate product cooler (455-E-108). PT. Istana Karang Laut for Petrochina International Jabung Ltd.
- South Jambi Project Phase 3 Gas plant expansions. Skid 5 piping System (455-V-501/502, 455-F-105/106). PT. Istana Karang Laut for Petrochina International Ltd.
- Project" Shallow Gas Project". Gas Fiscal Metering System (1144-A-440). PT. Tripatra Engineering for Conoco Philips.
- Project " Shallow Gas Project". Condensate Metering System (1135-A-511). PT. Tripatra Engineering for Conoco Philips.
- Project" Shallow Gas Project". Teluk Rendah Gas Plant, De-ethanizer-reboiler, De-ethanizer-column, De-Buthanizer-Reboiler, De-Buthanizer-Column, and Overhead Drum Vessel and Piping System. Conoco Philips.
- Vessel Engine Driven Gas Compressor NARI-1 Project. Junathi field. Quantity of vessels is 27 units. Gas Service International (GSI) Singapore. Bp Pakistan Exploration & Production.
- Hyperbaric Chamber System Project. AM 692, AM 693, AM 694 (for 3 unit vessel), Advanced Marine.
- South Jambi "B" Shallow Gas Project. Diesel Fuel Day Tank (1147-T-600 ¡V A) and (1147-T-600-B). PT. Tripatra Engineering for Conoco Philips.
- Vessel Compression and Process Solution. Weatherford Gas Service International (GSI) Pte Ltd. Quantities of the vessel projects are 48 units' vessels. Vessels types are suction scrubber and discharge bottle.
- Piping Process and Structure for DPP B Sub Sea Development Project, South jambi. PT Sarku engineering for Conoco Phillips.

9. PT. CITRA TUBINDO, Tbk. March 2001- March 2003, Kabil Estate, Batam
Foreign Investment Company in pipes manufacturing.

Job title: Quality control

Job description:
„X To control and ensure the process of pipes manufacturing follow to the procedure.
„X To ensure the product satisfy the client specification and requirement.
„X To determine the quality acceptance of product, accepted or rejected.
„X To prepare the report and certification of product accordance with standard.

10. PT. PERDANA KARYA for PT VICO INDONESIA. 1998-2000 Samarinda, East Kalimantan, Indonesia. Mechanical and electrical contractor company for oil and gas services. Under contract services with VICO INDONESIA (Contractor Pertamina).

Job title: Welder Foreman

Projects Involved:

- Mutiara Handil II, Pipeline Project with approx. 20 km long pipe 6" OD
- Badak field project, repair storage tank of 30 units.
- Badak field project, repair pipeline 6" OD approx. 5 km long, including pipeline supports.
- Badak field, skid and platform fabrication.
- Welding Maintenance of Instruments and Equipment process in VICO INDONESIA PLANT.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1021)

Go to Search Parameters...

Brief Description

Sr. First Aid Instructor, and Safety Practitioner with knowledge and experience in oilwell drlling operation and safety management including H2S

Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati

Competent in Microsoft office 2000 , Turbo C++ , Pspice, Mathcad, Derive, Converge, MathLab, Advanced Design System for Wireless and Microwave, Internet, Fluent in Arabic, English, and French, Occupational safety rules, Marketing and sales skills in the moroccan market

Welding Inspector Certified CSWIP 3.1 with Certificate No 21379. TWI, Granta Park, great Abington, Cambridge, CBI 6 AL, United Kingdom.

Experinces in welding, mechanical and Rig at an Oil Company, CALTEX. With the latest position as Coordinator. I need a job weets wiith my experiences.

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Municipality Of Saanich- Solid Waste Services/ General Labour

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

I have worked in the mining industry for the last 15 years. I have performed several duties in the operating and maintenance field. As well as supervised crews and trained new employees.

Logistics, Technology, Transport and Management Professional

I have Masters Degree in Geology with experience in Coal Exploration.

Over 14 years of experience with various reputed organizations as Instrumentation & Control Engineer with proven success in the Erection, Installation, commissioning & maintenece of a wide spectrum of Instruments and Process Automation Systems as Yokogawa DCS systems (Centum CS3000, CS3000,

Fitter and Machanist, Rigger, Dogman, JLG, Welding coded, Mining exp (Awarded Apprentice)

Industrial Projects, Purchase, Procurement, Supply Chain Management,Contracts Management,ERP Implementation,Vendor Mgmt, Business Development.,Material Management.

Varied and accomplished background in materials control and logistics.

4.5 years in petro-chem document control: both engineering and construction (Pre-T/A, T/A & Post T/A) phases, being responsible for the governing of drawings, drawing lists, invoices, contracts, engineering standards, construction packages, distributions all management levels

Welding/NDT/QA/QC Inspector

QA/QC Mech.Engineer near about four years exp. in the field of Pipe Mfg.Company,Pipeline & Piping during project execution, construction, commissioning of m/cs, pipeline and piping & system implement, execution and maintaining related to all quality control and assurance dept.

Lead Naval Architect with 5 years FPSO conversion and new building experience

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Licensed fork truck operator

Heavy Equipment Operator

Overhead crane opperater, press cnc machines and forklift training

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

NDT Inspector ASNT level II in UT, RT, PT, and MPI

Special Skills: Years of experience in cost-cutting, budgeting, planning and projecting, great communication skills, the ability to work well in and under pressure, team player.Other: Excel, Microsoft word, OSHA

Investigation of electrical documents and scheme in refinery & NGL plants. Simulation files checking in basic & detail design phases.

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

QA/QC Inspector experiences both on client and contractor side, ensuring the installed works meet the specified requirements detailed in contract drawings and technical specification given by the client, pre commissioning and commissioning of the systems, acquainted with the international codes and

Mining & construction Equipment, Oil field production, Power generation

Over 12 years experience as an apprentice, technician, service engineer and senior service engineer, of Home Appliances also as a sales executive, procurement of spares both locally and overseas.

ROTATING EQUIPMENT/TECHNICIAN,MAINTENANCE/OVERHAUL OF GTG POWER PLANTS GAS TURBINE PROPELLTIONS&AUXILARIES

Experienced NCCER-CSST Safety Technician,Paramedic OSHA 10,30,500, Army Corps of Engineers, Near- Miss Hazard Recognition and Root Cause Investigation Reporting, AHA/CPR Instructor,

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

Construction Safety Manager

27 years of mechanical and process engineering

Electrical / mechanical service tech

Experienced electrical contractor, foreman, and electrician, with expertise in machine/process control, motors & controls, power distribution, general wiring. Worldwide experience, including work in Antarctica, Mexico, Iraq, Taiwan, and Mongolia

Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.

Man of many trades

A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

Mechanical Supervisor / Project Manager

911 Paramedic with 10+ years in emergency medicine to include former Army EFMB medic and USAF medical technician.

Ex Firefighter 18 years, Breathing Apparatus, Confined Spaces, Fully Qualified Pllease view my CV

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out