Resume - maintenance millwright-28yrs. from trainee to maint. superintendent

Misco Jobs

Resume #69971

CONTACT INFORMATION:
View contact information...

I am looking forward to the opportunity to broaden my horizons and contribute to the growth and profitability of a stable and dynamic company such as yours.

I enjoy the challenge of maintenance, fixing unsolved problems and increasing production. I have been successful in this arena by increasing production by 30% as a Maintenance Supervisor. I believe my experience and knowledge can be utilized and enhance your company work production. I hope you allow me the opportunity to prove my abilities and work ethics for this position.

HIGHLIGHTS OF QUALIFICATIONS

Works well independently and with others.
Excellent supervisory and training skills.
Successfully reduced "downtime" and increased productivity by 35% by implementing maintenance programs.
Over twenty-six years Millwright experience in the sawmill environment

RELEVANT EXPERIENCE

Supervisory Experience
Supervisor of maintenance: twenty-four full time employees.
Developed preventive maintenance program to reduce "downtime" and increase productivity.
Scheduled all work; tracked employee hours; established annual department budgets.
Inventory Control and ordered all parts required to operate maintenance program.
Conducted safety training of employees.
Over saw powerhouse maintenance.

Millwright Experience
Repair of all sawmill equipment; installation of new equipment, rebuild and modify existing equipment.
Comply with all safety and lock-out procedures.
Millwright construction from demolition of old mill sight and construction of new sight from ground up; including sub-frame work, to setting alignment of all equipment and maintenance.

Equipment Operated
Arc and gas welder, gas and carbon cutting, air lancing, track cutter
Press, drills, pipe threader, double shaft and laser alignment, PVC pipe welder and cutter.
Fork lifts, boom trucks, mobile hydraulic cranes.
Pipe locator and sand blaster.

Equipment Maintained
Bandmills: Kockums, Salem, Letson Burpee
Edgers: Shurman, Mark 50, Salem
Debarker: Kockum, Sodderham, Nicholson
Trimmer: Prescott, Moore-Oregon, Irvington Moore
Planner: Stetson Ross
Sorter: Irvington Moore
Cherry Picker: Prentice
Overhead Berger Crane: 120 Ton
Black Clausen Quad

Environmental Maintenance/Monitoring
Potable water for turbidity and chlorine
Maintained sewage treatment plant
Powerhouse emission to ensure compliance
Implemented storm water run-off plan
Monitored leachate from landfills
Developed waste minimization for sawmill plant site
* Set up Haz/Mat plant sight and remediate Haz/Mat materials

EMPLOYMENT HISTORY

Present – July 2003 Sierra Pacific Industries, Lincoln, CA
June 2003-March 1998 Silver Bay Sawmill-Wrangell, Alaska
1998-1997 Louisiana Pacific-Ketchikan, Alaska
1997-Jan. 1995 Seley Sawmill-Ketchikan, Alaska
Dec. 1994-May 1982 Alaska Pulp Corporation-Wrangell, Alaska
April 1982-June 1979 Portac- Tacoma., WA
April 1979-Dec 1977 Alaska Pulp Corporation- Wrangell, Alaska
Aug 1977-June 1973 Times Mirror Press, California

EDUCATION AND PROFESSIONAL TRAINING

Verdugo Hills High School-High School Diploma 1973
L.A. Trade Tech-Offset Press person
Trained and Certificated for the following:
Haz/Whopper Certificate- 48 training up to and including Field Supervisor
Certified Crane Operator, TSS, TLL
First Aid and CPR Certificate
Maintenance Certificates
AmFAC Hydraulic Course: Nicett IIA Temp card
Fire extinguisher Certification for Inspection
Commercial Application Licenses for Restricted Pesticides
California CDL

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 1032)

Go to Search Parameters...

Brief Description

Revit Architecture, Auto LISP, Architectural Drafting, Auto CAD Drafting (2007 and 2008)

22 years in operations.

Experienced frame and finish carpenter with cabinet experience and management experience

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

Extensive expirence on multiple pieces of heavy equipment: track-hoe,dozer,back-hoe,scraper,8-15 ton carry deck cranes,fork-lifts&Lull/JLG,manflifts,Class "A" CDL A - NCCER Millwright,boilermaker,and rigging expirence as well

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

Caterpillar Dealership, Surface and Undergound Mining Experience.

Qualified Electrician- experience with pneumatics, air conditioning,smoke ventillation,contract plumbing, security and fire alarms,data wiring in domestic,commercial and industrial settings.

Experienced Mechanic, Have a wide range of experince from small engine to large diesel.I have a comercial drivers license and current DOT physical. Licensed Classes ABCD. Endorsements Hazmat, tanker, doubles and triples. I am also an experienced driver.

Looking for a plumbing position overseas

My functional areas of expertise include process improvement, risk management, regulatory compliance, accident reduction and claim investigation. In addition, I directed programs for Workers’ Compensation, EHS and DEP, ensuring compliance with State and Federal guidelines.

Electrician

Skilled Rigger and Crane Operator specializing in structual steel and installation of industrial machinery seeking challenging work 3 Years experience

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

ivil superintendent willing to travel owns fifth wheel current us passport

I HAVE BEEN INVOLVED WITH EQUIPMENT MAINTAINENCE ALL OF MY LIFE,AG/CONST BACKROUND 10 YEARS HEAVY EQUIPMENT EXPIERENCE 6 AS A FIELD TECH. LOOKING FOR AN OVERSEAS OPP.

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

PMP certified, PM and General management skills

Qualified Plumber & Gasfitter, Experience in Industrial Mining, Roofing and pipe work. Commercial Plumbing & Roofing,

pipe welder and structral welding

15 years as QA QC inspector from first piece lay out to final inspection of all machanical parts. Have been QA/QC manager as well as Operational Support Manager

Mechanical Fitter with 8 years of Experience

QUALIFIED, EXPERIENCED, OPERATOR

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

Objective: To work for a company as a Supervisor/Foreman/Journeyman carpenter. To use my skills to the best of my ability.

Construction Supervisor for Electrical and Instrumentation

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

HEAVEY DUTY DRIVER. (U.A.E) DUBAI, LIC.HOLDER

Just graduated from AVTEC Technical College in Seward, AK.

Commerical Truck Driver

Heavy Duty Diesel Mechanic/Fitter. 12 years experience with Volvo trucks and buses, hard working reliable skilled diesel technician.

Experienced Nine Year Superintendent Commerical / Residential

Application for the post of Excavator Operator

Employed as Sales Applications Engineer, I have supplied industrial, marine, mobile construction, process plant and aerospace markets pumps, valves, hydraulic & pneumatic components and systems since 1986.

maintenance millwright-28yrs. from trainee to maint. superintendent

My sckills cover a broad range of heavy equipment. Along with this I have made sure I have the safety skills needed to work in the Extreem Alaska enviroment.

C.A.W.I. PRESENTLY SEEKING C.W.I./BOILERMAKER FOREMAN

Industrial Construction Project Management

Fiber optics schooling

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Over 34 Years of experience in NDE Field.

Caterpillar diesel mechanic.

Field Service Mechanic

Free! Equipment Maintenance; Mechanical Experience; Fork-lift Certified; CDL

Electrician 309A

Sir, I have Passed Apprenticeship for 3yeas as Lineman (NCVT)and having 5years experience including 3yrs overseas experience in Maintenance and construction of 440v,11kv,22kv,33kv,110kv,132kv,220kv overhead Transmission & Distribution line.

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Experienced heavy equipment operator

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out