Resume - Emergency Response Manager Trainer and Health & Safety professional: NEBOSH, Tec...

Misco Jobs

Resume #70123

CONTACT INFORMATION:
View contact information...

HAYWARD TECHNOLOGY MIDDLE EAST – SHORT COURSE HSE INSTRUCTOR Haward Technology's courses/workshops/seminars meet the professional certification and continuing education requirements for participants seeking Continuing Education Units (CEU's) in accordance with the rules & regulations of the International Association for Continuing Education & Training (IACET).

KEY Achievements
* 30+ years Construction experience UK & Worldwide
* 12 years + HSE experience covering – Onshore fabrication & Offshore Pipe lay & hook up, Middle East oil, gas and generation systems, and platform revamp working in high H2S environments.
* 27 years overall Oil & Gas experience
* And 7 years - Instrumentation Commissioning on 3 Nuclear Power Stations in the 1970's and 80's
2006- 2008 SADRA / DOT – TEHRAN IRAN
HSE Advisor for STATOIL South Pars Phase 8 (designated HSE Manager) Jackets, main decks and ancillaries installation for Phase 6, 7 & 8, and SALMAN EPC Decks, Offshore and onshore.
Responsibilities
- Establish the HSE Plan and Security management Plan at Company's various onshore fabrication and offshore work locations for Loss Prevention
- Ensure that Project HSE Management policy, plans and HSE manual and safe working procedures are implemented effectively and are suitable for their purposes and use for which they are intended.
- Monitor work environment conditions and ensure regulatory compliance
- Implement site HSE and Security Training programs
- Approve the PPE and security equipment
- Conduct annual Inspections and Audit of the Fire Protection & Detection systems and LSA
- Prepare and conduct HAZID / HAZOP reviews with client for Hazards & Risk management, maintain and update the file.
- Conduct safety reviews with client and subcontractors, follow up on action points to completion
- Maintain and update the safety file for Engineering fire and safety
- Prepare Environmental compliance plan (to support EPR's)
- Provide assessments and training for the handling and storage of Hazardous materials and awareness of MSDS information.
- Prepare Project subcontractor interface bridging documents including ERP preparation and updates
- Establish Emergency Response procedures & Team training Level 1 & 2 & 3 onshore and offshore
- Conduct audits on design office construction sites and offshore – internal and external subcontractors, and conduct follow up audits to ensure corrective actions have been implemented.
- Conduct offshore audits on barges and AHT's IMS and ensure IMO (Solas) regulations are maintained
- Promote HSE and provide HSE advice to the project and Supervisors
- Organize monthly Management safety meetings
- Establish Permit to Work System; LO/TO, Scafftag, Ladder tag, Confined space entry and manage and train personnel.
- Keep up to date on the latest EU and Country directives, and inform the management & project team of changes
- Providing technical input into the formulation of the method statements and project risk assessments, and review prior to its distribution in site.
- Established training by Technician / Supervisor discipline for Hazard identification & Task Risk Assessment (for the Competent person)
- Conduct accident & Incident Investigation to determine the route cause, feedback to management & follow up on corrective actions
- Monitor and keep records of HSE activities of the project and report to the Project Manager and QHSE
- Develop and implement HSE programme, collect and report and analyze HSE performance against objectives and identify initiatives for improvement where necessary with training.
- Develop offshore Emergency Response Procedures Level 1 & 2 in coordination with Client emergency systems and conduct training and joint drills
- Liaison, reporting and regular communication with the Project Manager. Provide Training, advice and support concerning Health & Safety Issues to Senior Management
- Ensure compliance with the ISM system and ISO 9001, 14001, 18001
- Join with MWS for Compliance inspections of IMO (SOLAS) Regulations on Company's vessels
- Conduct periodic Health & Hygiene inspections at offshore barges & vessels,
- Arrange Occupational Health & Safety facilities and be responsible for the standards of medical facilities on Companies vessels, maintain (with strict privacy) records of health and medical fitness.
- Provide Personnel evaluations and career development recommendations

2001 – 2005 Mahanakorn University of Technology - Bangkok
HSE Instructor - introduction and training in discipline fundamentals for under-graduates and technical and computer studies teacher (English)
1995 – 2000 HSE Supervisor Zakum Development Company
Managing a team of 7 on Arzanah Island on behalf of Satah Business Unit and Development and Training for Emergency Response Team
1993 - 1994 Commissioning Project Engineer with (HSE) Safety Responsibility – Salman Field (Iran)
DB-27 McDermott Int'l
PTW control, Process Modules Fire & gas commissioning, oil field start up and operation for phased hand over of (turnkey) replacement 220,000 BPD central complex, generation and accommodation to the Iranian Offshore Oil Company (commissioning team 18 with 4 safety officers)
1990 – 1992 Cost Control & Company Check bids training of local staff – Oman
Petroleum Development Oman
(Shell Pet Dev) Projects & Engineering Department – Muscat
1987 – 1990 Engineer - N. Ireland (FPSO) Harland & Wolff PLC Belfast
Tender proposals and estimating for non-ship projects, mostly oil production conversions and Military defense projects; earlier position involved PTW Safety procedures and planning & cost control for the oil production module of the BP SWOPS Ship.
1986 Project coordinator – India McDermott Int'l
Based in Calcutta as project Advisor to new local Company beginning Steel fabrication for offshore platforms; Training of local nationals
1986 Estimating Engineer – Dubai McDermott Int'l
Offshore / Onshore Modules and pipelines bid coordinator for major projects Middle East – Iran – Qatar - Egypt – India - Singapore
1985 Project & Safety Engineer - Offshore Dubai DB-17 McDermott Int'l
Installation, pipe lay to central complex, hook-up and start up assistance of the Rashid B Offshore Gas production facility for DPC; Supervision and control of safety of a Multinational hook up work force of 200+ men.
1983 – 1984 Project & Safety Engineer - offshore Abu Dhabi DB-17 McDermott Int'l
JAPANESE NKK built modules inspections before loadout Yokahama, Offshore BUNDUQ field re-vamp. Replacement process systems on 14 satellite well head platforms, infield pipe lay and installation of new well head platforms and the commissioning of the Process central complex and living quarters. Very High H2S environment; PTW control with 4 safety officers
1982 – 1983 Senior Instrument Engineer - Offshore Abu Dhabi Intermac-260 McDermott Int'l
ZADCO Upper Zakum oil field, hook up and pre-commissioning of remote well head production facilities; 200+ man multinational work force
1982 Instrument Field Engineer – Scotland Howard Doris - Kishorn
Pre-commissioning of the Phillips Maureen Hi Deck, PTW Control, task sheet preparation and control
1981 Instrument Engineer - Lowestoft Leman BT - Shell Exploration & Production
Leman offshore Gas field; Design and engineering of new hydraulic Block and vent safety shutdown system; Offshore supervision of installation and commissioning during shutdown period
Other projects:
OFFSHORE EGYPT ALEXANDRIA HOOK UP
NUCLEAR BRAZIL ANGRA DOS REIS UNIT 1 LEAD I & C
OFFSHORE UK NINIAN SOUTHERN INSTR FIELD ENG
ONSHORE NORWAY HAUGUSEND MODULES ESTIMATING
ONSHORE LIBYA ZELTEN GAS COMPRESSION INSTR Fire & gas
ONSHORE GERMANY ESSO REFINERY INSTR Fire & gas
OFFSHORE UK SHELL LEMAN GAS COOPER BESSEMER
NUCLEAR S.KOREA KO RI UNIT 1 INSTRUMENTATION
ONSHORE SAUDI ARAMCO LPG INSTRUMENTATION
NUCLEAR UK DUNGENESS - B INSTRUMENTATION

Education
BA Bachelor of Arts - Business Studies (UK Degree)
City & Guilds - Mechanical Engineering Part I &II (Engineering Diploma)
5 year Time served apprentice (Budenburg Company)
NEBOSH Construction Certificate (UK Ordinary National Certificate)
Cambridge Teaching Certificate – Cambridge University
Certified Safety Training Specialist (STS) National Association of safety professionals (Authorized to issue NASP Diplomas and cards)
Certified Safety Auditor (SAC) National Association of Safety professionals (Includes Accident Investigation, Hazard analysis and safety inspections)

Certified Environmental Health and Safety Management Specialist (EHS)
National Association of Safety Professionals
Includes:
"OSHA Compliance and Inspection Priorities"
OSHA 29 CFR 1910.1200 Hazard Communication Standard "HAZMATS"
"DOT Emergency Response" Understanding the Material Safety Data Sheet (MSDS)
"OSHA Recordkeeping Requirements"
"Ergonomics"
"Bloodborne Pathogens"
"PPE"
"Lockout/Tag Out
"Major Provisions of the Act and Regulations"
"The Montreal Protocol"
"The Clean Water Act"
"The Safe Drinking Water Act"
"HAZWOPER" "HAZWOPER" 29 CFR 1910.120
"Fire Safety"
"Fire Protection, Exits, and 1st Aid"
"Welding, Cutting, Brazing"
"Confined Space"
"Comprehensive Environmental Response, compensation and Liability Act;
"Site Specific Plans and Programs"
"OSHA Requirements for Plans and Programs"
"LOTO Program"
"Bloodborne Pathogens Exposure Control Plan"
"Emergency Response Plan"
"Spill Prevention, Control, and Countermeasures Plan"
"Guide to Federal Environmental Laws and Regulations"
"Community Right to Know Audit Protocol"
"CERCLA/SARA Audit Protocol"
………….
Certified Fall Protection and Elevated Structures Safety technician (SLT) National Association of Safety professionals
Certified Material Handling Safety technician (MHT) National Association of Safety professionals
Certified Trenching and Excavations Safety technician (TET) National Association of Safety professionals
Certified Welding Brazing Safety Technician (TET) National Association of Safety professionals

Accreditation
MA Cost E. Member - Association of Cost Engineers (UK)
National Association of safety Professionals (NASP)
World safety Organization – Assoc member
Institute of Occupational Safety & Health (IOSH) Member

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 1031)

Go to Search Parameters...

Brief Description

Experienced Ops Engineer

“Specialist in material management with a reputation of extraordinary retention level”

Drafter

Sales, Engineering Project Manager

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I have 25+ years experience in the Instrumentation/Electrical field in construstion and maintenance

AWS Certified Welding Inspector

I have work with heavy equipment all my life and have been in construction for many years

Electricain

Heavy Equipment Operator

Very strong experiance in the international business, export, business development, project handling, managment skilles, computer skilles, problem solving

My qualifications are reinforced by over 20 years as a front line supervisor in the construction, rejuvenation, revamp of Oil and Gas, Petrochemical and Nuclear Power Plant Projects specifically in the field of Insulation Works.

Emergency Response Manager Trainer and Health & Safety professional: NEBOSH, Tech IOSH (NASP) Certified Safety Auditor, Certified Health & Environmental Management Specialist 2005/2006 and other technician certificates. 12 + Years HSE experience, 30 + years overall experi

Twenty two years of hands on electrical construction, Ten years commissioning start-up supervision & QA/QC

I have a lot of experience in many different industries. I am a fast learner and a hard worker. I have good organizational and management skills. My employers and fellow employees consider me a pleasure to be around and easy work with.

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Free! A multi disiplined Construction Superintendent with a proven track record of completing difficult projects to the satisfaction of Client and Contractors on time, often in harsh and demanding environments.

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

AWS-CWI 30 years in the Welding Field - Pipeline, Fabrication, Piping/Structural - Onshore and Offshore - Domestic and International

Maintenance Supervisor\HVAC Mechanic\Controls Technician

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

my jobs

Project Management / Inspection / Procurement / Quality Assurance

GPS, IT Technician and Manager

Looking for a postion in Service/Operations management based in the Baltimore area. Excellent platform and presentation skills.

Journeyman Electrician Red Seal Endorsement

Workshop / Fleet manager over 20 years experience

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Highly qualifed Interior tradesmen experenced in all interior trades with over ten years experience including managment level.

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

Basic operational skills of the track hoe including safety procedures. Use of the engineer's level. Measurement of cross slope embankment and trench grade line using steel tape and level. Reading and understanding blueprints. Additional training on the backhoe and bulldozer.

Working as HSE Mngr. /Eng. /Supervisor postions in RoK and Ex-Soviet Republics, on both oil field and construction HSE managment and supervision for multi-national companies, BSc Civil Engineering and 10 years civil engineering background,reside in RoK, holder of Residence and Work permit for RoK

I have been working in the mining industry for the past 29 years. I have gained a large amount of experience using several types of mining equipment over the years. I have been commended on my attention to detail, safe work practices and team work. I know I would be an asset to your company.

Expert in basic and detail engineering services for EPC execution of Power and Oil/Gas Plant. Global exposure from concept to commissioining support.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Electrician - Certified

Industrial Electrician by trade who is now working as a Commissioning Operations Maintainer in Explosives and LNG facilities.

Supervised main LNG works from Administration and Utility Area

A qualified engineer with an exceptional and extensive track record in managing large maintenance infrastructures systems for diverse industrial setups

I am a heavy equipment specialist. I repair all types of earthmoving equipment. My strong suit is welding and fabrication.

* PROJECT / PROGRAM MANAGEMENT * OPERATIONS * ENGINEERING *

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

Firefighter, Search and Rescue Instructor, Safety Instructor, First Aid Instructor, Emergency Response Coordinator, Team Leader, Crew Chief,

Crane operator and Driver

My experience includes the Superintendent level managing maintenance crews for a nickle smelter. I have a trades background of 25 years which includes millwright; welding and machinist. I am currently working for a large Nickel Project overseas and have extensive experience with RCM.

MECHANIC/WELDER/GENERAL MAINTENANCE & REPAIRS

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out