Resume - testing, commissioning, construction and maintenance

Misco Jobs

Resume #70823

CONTACT INFORMATION:
View contact information...

Current Employment: United Group LTD. Hamilton
Company Address 89 Garnet Avenue, Te Rapa Road, Hamilton
Position Protection and Maintenance Technician

Job Summary: High voltage installation, Testing, Commissioning and Preventive
Maintenance.

Company name: Tihama Power Generation Company Limited / International Power

Company Address: P.O. Box 32212, 3rd Floor, Said business Centre 2, Prince Faisal, Bin Fahad Road, North Al Khobar, K.S.A.

Company Profile: Tihama Power is subsidiary of International Power with interest in 37 power stations in 18 countries around the world. The business is focused in five core regions – North America, Europe, Middle East
Australia and Asia. Able to operate a range of
Power plant technologies namely thermal, hydro
Pumped storage and wind. These technologies
Produce electricity using different fuel types that
That includes gas, oil, coal and renewable sources such as wind and water. The main objective are
Generating power, wholesale production of fresh
Water through seawater desalination and
Distribution of steam.

Project site: Middle East, K.S.A. Eastern Region

Position: Electrical Maintenance Engineer
Inclusive Date: Sept 2005 up to present
Job Summary
Maintenance of all Electrical equipment, Testing, Installation, Commissioning and Maintenance.

Responsible for the effective maintenance of all electrical equipment, controls and protections of the plant. These include electrical testing, calibration, commissioning, repair, overhaul, installation, inspection and trouble shooting to maintain electrical equipment's availability and reliability.
Conducts routine inspection and maintenance of all electrical equipment such as: 230 kV equipment, HVAC, protective relays, high voltage switchgears, motors and motor control centers, UPS systems, chargers and batteries.
Analyzes/troubleshoots electrical faults, failures of controls, protections operation, measurement discrepancy and PLC (Programmable Logic Controller) systems. Perform calibration/testing of all protective relays, transducers, metering and overload protection installed in the plant.
Performs switching, isolating, testing, applying fixed and portable earth in accordance with PTW system of high voltage equipment up to 230 kV.
Overhaul, condition, and conduct testing of low and high voltage/capacity motors and other electrical equipment during outage or corrective maintenance.
Responsible for the maintenance of 230kV disconnecting switches and SF6 circuit breakers including associated protection systems like over current, differential, distance and earth fault relays.
Promotes Health and Safety Environment. Ensures that regulatory and budget requirements are being met.
8. Responsible for the maintenance of barrier gates and card access.

Company Name: Masshore Joint Venture International Sdn. Bhd. (MJVI)
Company Address: Lot 5572 Spg.120 Jln.Pandan Empat, Kuala
Belait, Negara Brunei, Darussalam
Company Profile: Prestigious company that provides
Manpower services on all trades.

Project Site: BRUNEI SHELL PETROLEUM (OFFSHORE)
Position: Electrical Foreman
Inclusive Date: April, 2003 up to March 2004
Job Summary:
Supervise and assist sub sea cable laying, splicing, testing and terminating.

Duties and Responsibilities:
Assist on cable pulling of high voltage cable.
Construction on electrical as per work pack.
Upgrade motors and motor controls and Electrical Facilities.

Company Name: ISCOSA Industries and Maintenance Ltd.
Company Address: P.O.Box 1032 Dammam, KSA
Company Profile:
ISCOSA is subsidiary of Westinghouse Electric Corporation with offices in Riyadh, Yanbu, Kuwait, USA & United Kingdom. Its charter is to support industry throughout the Mid-East providing a broad scope of technical, management, training support, mechanical, electrical field engineering maintenance & manufacturing services. ISCOSA acts as the repair & service arm of Siemens Westinghouse in KSA & surrounding Gulf Countries. Consist of 100,200 workforce worldwide.

Position: Electrical Engineer
Electrical Field Services
Inclusive Date: September, 1997 up to September, 2001
Job Summary:
Installation testing and commissioning of electrical switchgears. Supervise and monitor the completion of the project. Plan and control all preventive & corrective maintenance work on site.
Duties and responsibilities:
Supervise the installation, testing & commissioning of electrical equipment such as Power Transformer, High Voltage, and Medium Voltage & Low Voltage Switchgears.
Make design revision on projects for execution as dictated by field condition & materials availability & other technical considerations.
Prepare schedule & assign construction crews & equipment needed in the construction project base on workload & target date of completion/energization.
Check & requisition line materials & equipment needed in the construction project.
Study, plan, schedule, prepare & coordinate the request for electric circuit power interruption related to the execution of construction projects.
Coordinate with other functional organization regarding materials availability & delivery to job site, assists equipment & crew to facilitate work execution
Update promptly & regularly work accomplishment reports & files through the computer-based programs for monitoring, performance, evaluation, future planning & management advisory purposes.
Conduct regular inspection of on-going projects to ensure crew compliance to work safety procedures, adherence to design specifications, work accomplishment as to projected and planned schedule & to anticipate or identify possible construction problems for proper proactive actions.
Conduct functional tests on GIS, 380 Kv, Hipotential test on medium voltage cables & Power Factor Insulation Testing of 380 KV Capacitor Voltage Transformer.
Perform Power Factor Insulation Testing of 380/230 Kv & capacitor voltage transformer.
Conduct relay testing, power transformers, circuit breakers, transformers, load break switch, voltage & current transformer.
Testing of new switchgear 4.16 Kv,TP3 Offshore

Supervise the installation, testing and commissioning of substations and other projects including relays & overhauling of busducts.
Supervise maintenance engineers to effect efficient & reliable transmission and distribution of electric power
Conduct test of power transformers and
Distribution transformers of different ratings (i.e. winding & insulation resistance tests, polarization index test, ratio test, power factor test and die electric test).
Conduct test of power circuit breakers of
Different ratings (i.e. Insulation test, contact resistance test and breaker motion test)
Conduct test of lightning arresters and bus
Supports (i.e. insulation test).
Conduct test of current & potential
Transformers (i.e. winding and insulation resistance tests and ratio test).
Conduct test of disconnect switches (i.e.
contact and insulation resistance test).
Project Handled:

KEMYA Jubail Petrochemical
Masaco/Hitachi Ghunan Substation 380Kv
Asia Brown Boveri Sceco Fhadili
Al Bilad Catalyst Jubail Industrial
Walls Dammam 1st Industrial-Dharan,KSA
Aramco /JGC Juaymah Gas Plant,Juaymah
Saudi Chevron KFIP JUBAIL
SWCC/Mitsui Aziziah,AlKhobar)
SAIS (Saudi Arabia International School Dharan,KSA)
SAFCO (Saudi Arabia Fertilizer Company, Dammam,KSA)
BGP (Berri Gas Plant) ( JUBAIL )
Arabia-American Company (ARAMCO)
SWCC Fire Protection Project (Yanbu,KSA )
14. Saudi Parson/KEMYA major Projects (JUBAIL)
15. ARAMCO PROJECT, HAWIYAH

Company Name: Euro Mechanical & Electrical Contractors
Company Address: P.O. Box 46153 Abu Dhabi, U.A.E.
Company Profile:
Prestigious company that provides both mechanical & electrical field service engineering maintenance, management & supply personnel to different industries around the country. It employs 400 trained personnel. Entered into Contractual agreement with GASCO Bu HASA Industries on their Super High Yield Project.

Position: Electrical Foreman
Gasco Bu Hasa (Super High Yield Project)
Inclusive Date: May 1996 up to April, 1997

Job Summary:
Conduct routine preventive maintenance services on phases of electrical department workload. Give instructions to all electricians on site. Read and interpret & schematic diagrams.

Duties and responsibilities:
Supervise electricians in the underground & overhead cable laying.
Oversee the installation of electrical conduits/cable trays for instrumentation, lighting & power conductors, pipes for electrical and instrument cables, shutdown panels, wiring interposing relays and inter panel connections.
Supervise electricians in performing electrical tests such as insulation resistance test, impedance test, surge comparison test, direct current high potential test, dielectric breakdown voltage test, polarity/phased relation test, insulation power factor measurement and other test that may be necessary to ensure the quality of all fabricated, manufactured, repaired and reconditioned machines, equipment and accessories.
Oversee or perform cable laying/pulling from local panel to control, relay MCC and switchgear room.
Termination of control and power cables.
Conduct sequential/functional testing of newly installed electrical equipment. Control, instrument and devices.
Estimate the length of cables needed. Insulation test on cables and conductor continuity test.
Involve in the termination glanding and tagging of cables.
Maintain and upkeep inverters.
Monitor inventory and recommend stock levels for electrical materials needed.
Prepare daily report on job completion.

Company Name: Asea Brown Boveri
Company Address: P.O. Box 8796, Riyadh 11492 K.S.A.
Company Profile:
ABB/AEIL is a world wide leader in electrical engineering, it can be found in 140 countries in which ABB/KSA is one of its leader in manufacturing & distribution of Power Generators, Transmission, Distribution Transformers, Industrial Automation, Transportation Systems Environmental Control Products, Low, Medium & High Voltage Switchgears and other related fields. There are 30,000 employees serving in Middle East, Africa, Asia and Latin America while 150, 000 are spread worldwide.

Position: Site Service Engineer
Department: Compact Substation
Inclusive date: September, 1995 UP TO May, 1996
Job Summary ;
Assemble compact substation, prefabricated substation & mobile electrical centers.

Duties and responsibilities:
Report Project Engineer.
Perform installation of compact substation according to design.
Coordinate with colleagues on safety rules, regulation and practice while on site.
Assist hi-pot testing and commissioning of high voltage switchgears & high voltage cables.
Perform splicing of high voltage cables from high voltage switchgears to transformer primary and bus bar connection from transformer secondary to low voltage switchgears.

Position: Assembler/Technician
Department: Compact Substation
Inclusive Dates: March, 1994 up to Septmeber,1995

Job Summary:
Install switchgears (low, medium & high voltage) and transformers.

Duties and responsibilities:
Assist in the installations of switchgears, load break switch or main ring unit.
Perform cabling, splicing and termination of high voltage cables.
Perform glanding and grounding, bus bar connection for low voltage.
Perform installation of current transformer and wiring for metering and protective relays.
Assist on simulation of ground fault sensor by injecting current on current transformer primary.

Company Name: Ever Electrical Manufacturing Inc.
Company Address: 44 Malaya Street, Barrio Malanday Marikina City
Company Profile: Manufacturer & distribution of quality panel boards, programmable controllers, motor controls center, distribution transformers, switches, circuit breakers and others electrical products for industrial automation, lighting for household and vehicles. It has 5 five branches around the country and sole distributor of Klockner- Moeller Products of Germany.

Position: Panel Board Section Supervisor
Inclusive Dates: May,1991 up to February,1994

Duties and responsibilities:
Encourage subordinates to excel in their work to carry out department objectives relating to continued workforce improvements.
Demonstrate and explain to apprentices the process of assembling panel boards.
Participate in the explanation of procedures of products assembly during seminars and field trips conducted by different schools and universities in the country.
Handle the master issuance and transfer slip of orders.

Position: Quality Controller
Electric Meter Department
Inclusive Date: March, 1990 up to April, 1991
Duties and responsibilities:
Uphold high quality standard of electric meter.
Carefully analyze proper output as specified in the design.
Conduct final test & ensure quality and accuracy of finished products.
Assist workers in calibration of electric meter.
Make reports on all defective items.

SEMINARS and TRAININGS ATTENDED:

Illumination and House Wiring Design
6 hours/day on day's session
Manila, Philippines

Power Plant Instrumentation
6 hours/day on 2 days session
Manila, Philippines

Tropical BOSIET (Basic Offshore Safety Induction Emergency Training) Including Travel Safely by Boat
8 hrs. /day on 3 days session
Megamas Training Center Sdn Bhd.
Mumong, Kuala Belait, Brunei

Managing Hazards at the Workplace Course
Conducted by MEGAMAS TRAINING COMPANY SDN BHD
8 hrs / day on 3 days session.
Megamas Training Center.Sdn Bhd.
Mumong, Kuala Belait, Brunei

Permit to Work for Supervisor Course
Conducted by MEGAMAS TRAINING COMPANY SDN BHD
8 hrs / day on 3 days session.
Megamas Training Center.Sdn Bhd.
Mumong, Kuala Belait, Brunei

EDUCATIONAL BACKGROUND:

Bachelor of Science in Electrical Engineering
Technological Institute of the Philippines
March 1990

LICENSURE EXAMINATION TAKEN:

PRC License Registered Electrical Engineer: 0023689

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1030)

Go to Search Parameters...

Brief Description

Deep knowledge in motor engines and auto-eletrical , eletronic Injection , and etc. I've got trade qualification as mechanic and deep background.

I&C Technician with broad experience

Electrician, Air Conditioning & Refrigeration Mechanic with Industrial, Commercial and Residencial Experience, Currently working for an Industrial Switchgear and Automation specialist in the Electrical Industry as a sales engineer.

Instrument Engineer / Supt

Energetic and versatile Quantity Surveyor (QS) with proven expertise, working with an International Airport Construction Company.

Professional Heavy Equipment Operator rated with Class B+, Professional Driver for both cars and Heavy Vehicles, Knowledge in Purchasing, Surveying.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.

Water & Wastewater Specialist searching for a challenging position overseas.

Production, Laborer, Auto Detailer, Assembly

34 years in instrumentation industry.

MEng. In Mechanical Engineering,career as a Sales Executive Manager,Capable of using Microsoft Word, Excel, Power Point, also Enterprise Resources Planning SAP R3, Graphic software Adobe Photoshop, Auto CAD. communication,leadership,work in both team-oriented and self-directed environments

Open Crane Operator and Advanced Rigger

Dynamic, self motivated and team player

Qualified Electrician,with 15 years experience.

Construction management, real estate development, heavy industrial construction, construction claims, cpm scheduling, fluent spanish, mining construction

Overall manager for M&E services on a large high school, including 2 boiler houses, heating, hot and cold water, gas, electrical & electronics, and directional drilling.

Welder looking for immediate full time position

Excavator operator ,matric pass, 2 years of experience

Professional Contract Chef / EMR Available

Experienced concrete superintendent

Advanced British CITB scaffolder / Supervisor / Foreman-16 years exp

I inspect equiptment for faults & malfunctions, determine repairs required, do the repairs required and test them.

A dedicated worker who is able to solve on job problems and leads the team with motivation

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Paramedic with urban/rural/industrial experience.

I can work as a carpenter, mason, cleaner (territories and premises), car driver and assist in other jobs.

Besic Welding Diploma HOlds 2 position stick SMAW and 1 position flux core tickets from Canadian Welding Bureau Certification....WHMIS, Fall Protection, confined space entry, hoisting and Rigging , forklift ticket, occupational health and safety, hydrogen sulfide (h2s) , CPR,

I have 12 years experience with working as a Diesel Fitter Mechanic, I am completly confident with working indepently or as part of a team. I have a certificate in HV mechanical & Electronic Systems, Maintenance and Repair.

Millwright/Industrial mechanic and industrial construction mauntenance mechanic

industrial instrument mechanic/building automation

I want to find work Overseas in the Tower Construction Field.

An experienced Rig Mechanic with high level knowledge on Mining industry

Installation, maintenance and repair of medical equipments

NACE-USA Certified Senior Corrosion Technologist & MICorr grading from Institute of Corrosion-UK, having 19years work experience in Cathodic Protection Technology Services & Corrosion Control Services is available for employment.

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Instrumentation Technician/Trainer/QA/QC

Installation, Maintenance, and Repair, Multi Site Cosmetic/Maintenance, Equipment Operators

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Excavator operator / loader

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Multi-skilled engineer

testing, commissioning, construction and maintenance

BGAS Certified Painting Inspector Grade -2 & Civil Eng. Diploma Holder working as Painting/Civil Inspector, with more than 18 years Exp. in the Engineering/ Construction Oil & Gas field & Industrial construction. My principle activities are Quality Controlling 'Inspection monitoring & Supervision

Instituteof management Diploma, NVQ management level 4, Certificate of professional competence national & international road haulage, Confined space certificate of competence,CITB health & safety certificate, Excavators, Loading shovel, Dumper Trucks, Road rollers, HGV1 licence

Experienced Ops Engineer

“Specialist in material management with a reputation of extraordinary retention level”

Drafter

Sales, Engineering Project Manager

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out