Resume - with Australia Visa Class BN Subclass 136 Skilled-Independent

Misco Jobs

Resume #70915

CONTACT INFORMATION:
View contact information...

Australian Visa: Class BN Subclass 136 Skilled - Independent

Certificate of Competency #: 0513160338389
Issued: November 10, 2005

Driver's Licensed: N04-93-272560
SSS No: 33-6084913-1

Objective: To give superior service to the company and serve willingly for any job task assigned

License Attained

Title: BUILDING WIRING ELECTRICIAN
Certificate of Competency #: 0513160338389
Issued: November 10, 2005
License Authority: TECHNICAL EDUCATION and SKILLS DEVELOPMENT AUTHORITY [TESDA]
Location: TESDA Complex, East Service Road South Super Highway, Taguig, Metro Manila

Work Experience

AAC [Arabian Air-conditioning Contracting]
HVAC, Plumbing, Fire Fighting, Electrical & Maintenance Services
GRADE A Electro – Mechanical Contractors
P.O. Box 40688, Doha, State of Qatar
Tel. #: 4317488/ 4317489 / 4316345
Fax: (0974) 4317487
Email: arabianyork@qatar.net.qa or contracting@aac.com.qa
Web Site: aac.com.qa
October 14, 2006 – July 03, 2007
July 04, 2007 – October 16, 2007

Position: Electrical Foreman
Jobsite: Tower F, Parcel 2A Pearl Qatar Tower
Date: July 04, 2007 – October 16, 2007

DUTIES and RESPONSIBILITIES:

1. Supervise rough installation of RSC, IMC, EMT & PVC Pipes for power, lighting, telephone and auxiliary system (Fire Alarm, BGM/pa, Intruder Alarm, Clock, CATV & CCTV System) and installation of various types of devices such as power outlets/sockets, lighting fixtures, telephone outlet, wiring and auxiliary devices. (Smoke Detectors, F.A Bell F.A. manual station, Speakers, Door Detectors, motion detectors) from Level 4 - Level 15 Parcel 2A Tower
2. Plan, prepare daily task schedule, call meetings for distributions of responsibilities to each staff under my supervisory
3. Prepare materials take off prior to slab concreting
4. Coordinate through meetings with the Project Mgr, Project Engineer, Civil Engineer, Safety Engineer. and Project Consultants with regard to project development
5. Make daily, weekly and monthly written reports and submit to the Proj. Engr. with regard work status per floor bldg level basis
6. Coordinate via meetings with other trades: Steal Fixer Foreman, Post Tensioning Foreman, Carpenter Foreman and Project Consultants to avoid conflict and delays at work

Position: Electrical Foreman
Jobsite: Karh-amaa Substation [PSS2 and PSS5]
Date: October 14, 2006 – July 03, 2007

DUTIES and RESPONSIBILITIES:

1. Roughing – in layout of RSC, IMC, EMT & PVC Pipes for power, lighting, telephone and auxiliary system (Fire Alarm, BGM/pa, Intruder Alarm, Clock, CATV & CCTV System)
2. Wiring & termination works for power, lighting, telephone and auxiliary system
3. Installation of power outlets/sockets, lighting fixtures, telephone outlet, wiring and auxiliary devices. (Smoke Detectors, F.A Bell F.A. manual station, Speakers, Door Detectors, motion detectors)
4. Testing and commissioning of all system. (Installation test, continuity test)
5. Installation of low voltage Switch gears, Panel Boards, Distribution Board, Motor Control Center and low voltage distribution Transformer including its cabling, raceway and termination.
6. Installation of Cable trays including fabrication of its support system
7. Laying of High Voltage and Low Voltage feeder Raceway. (Laying of 2"0 PVC to 6"0 PVC)
8. Meeting and planning with the Project Engineer with regards the project status and activities
9. Supervise electricians and helpers in the jobsite
10. Make daily activity reports and accomplishment

United Neon Ever Corporation
4F HPL Bldg. 60 Sen. Gil Puyat Ave. Makati City
April 03, 2006 – September 23, 2006

Position: General Building Electrician/ Building Maintenance

DUTIES and RESPONSIBILITIES:

1. Develop as-built plans of the electrical system of the building
2. On call 24/7 on emergency electrical problem that may arise anytime
3. Determine proper balancing of load on 3-phase supply
4. Maintain all electrical apparatus of the building
5. Installation of Electrical Devices such as, convenience outlet switches and circuit breakers
6. Installation and repair of Lighting fixtures
7. Maintain and repair various types of electrical equipments such as fan blowers, A/C Motors and transformers air conditioning
8. Label all circuit breakers / panel boards
9. Lay out of cables and electrical conduits
10. Regular Monitoring of elevator controls
11. Replacement of busted light bulbs of the building's hallway
12. Rehabilitate existing electrical system that have been worn out due to wear and tear
13. Supervise other contractors that will perform repair
14. Monitoring of PABX
15. Termination of wires inside the panel boards
16. Regular check up of loading of electrical system
17. Daily check up and inspection of electrical rooms of the whole five floor building

RERA Material Handling Corp.
RERA Material Handling Corp. Molino –1, Bacoor, Cavite, Philippines
16th August 1999 up to March 24, 2006

Position: Senior Electrician

DUTIES and RESPONSIBILITIES:

1. Makes an ocular inspection of the Job Site
2. Consults and meets with the Project Engineer with regards to the Project Planning
3. Lists of Materials needed to be purchased for the said Project
4. Installs of Panel Board, safety fuse box, cut-out box and circuit breakers
5. Installs/Replaces/Repairs light bulb sockets, wall outlets and switches
6. Supervises in pulling of wires inside the Electrical Conduit
7. Rewires of grounded circuits
8. Measures the current, using clamp meter, make sure that each circuit is not overloaded
9. Replaces and repairs existing fuse box and circuit breaker
10. Make a final inspection before putting the main switch on
11. Rewinds of A/C motors/Replace capacitor and bearings
12. Installs Electrical appliances such as fans (all types), water pumps and A/C units
13. Conduit layout and wiring termination
14. Cable layout
15. Power Panel board wiring and termination
16. Cabling and conduit layout for Service Entrance
17. Cable splicing for Service Entrance
18. Wiring and perimeter lighting installation
19. Connects annunciator, telephone and intercom system

DM HERNANDEZ ENGINEERING
19th of June 1995 – 31st of July 1999
129 Lourdes dr. corner N. Domingo St. San Juan Manila

Position: Electrician

DUTIES and RESPONSIBILITIES:

1. For INSTALLATIONS

* Installs, replaces/ repairs of lighting fixtures
* Replacement of busted starter, ballast, fluorescent holder and light bulb
* Install, replace and repairs of lights switch and electrical sockets
* Mounting of panel boards, from 30-600 amperes
* Layouts of cables from #14 to #200 mcm
* Layouts of pipes from half inch (1/2 inch) to 4 inches

2. For HOUSE WIRING

* Layouts of electrical wiring
* Installs/Replaces/Repairs of safety switch and circuit breaker
* Installs/Replaces/Repairs fuse box, cutout box, circuit breakers
* Replaces/Repairs defective wall socket, switch, light bulb sockets and lights

3. For REPAIRS

* Repair of Electrical appliances
* Washing machine and Dryers – rewind of motors. Replacement of capacitor, repairs of switches, re-shafting and re-bushing. Change of belts and other spare parts.
* Electric Oven, Flat iron, Microwave – Trouble shooting and replacement of defective parts
* Water pump – Rewinding of motors. Replacement of capacitor, bearing, shaft seal
* Electric Fan and exhaust fan – rewinding of motor, re-shafting and re-bushing, replacement of capacitor, fan blades, repairs of switches, Change of gears and other spare parts.
* Pulling of cables inside electrical pipes
* Rewinds/Repairs/Installations of A/C motor from ½ horse power to 5 HP (horse power)

4. Makes a final inspection before turning the main switch on.

PSALMS 23 ELECTRICAL SERVICES
1st of April 1987 - 31st of May 1995
8th of September 1986 - 31st of March 1987
111 N. Domingo St. San Juan, Metro Manila, Philippines

Position: Electrician
Inclusive dates: 1st of April 1987 - 31st of May 1995

DUTIES and RESPONSIBILITIES:

1. Survey of location and planning
2. Install Panel board, safety fuse box, cutout box, and circuit breaker
3. Connection of wirings in Panel Board
4. Layout of wires and electrical pipes such as Conduit and PVC Pipes
5. Determine the route, number and connection of wires as per plans or drawing specification
6. Tightening, splicing copper conductors, weather proof switches, receptacles and plugs
7. Maintaining of meter base and services
8. Check all Electrical fixtures like lights, switch, wall outlet, circuit breakers and fuse box if properly installed and functioning
9. Install and repair fans (all types), A/C Unit, water pumps and other electrical appliances
10. Test ad correct circuit if it is grounded or not functioning
11. Replace defective fuses and circuit when discovered to be in malfunctioning status
12. Rewinding of A/C Motors and coils
13. Make a final inspection before turning the main switch on

Position: Apprentice Electrician
Inclusive dates: 8th of September 1986 - 31st of March 1987

DUTIES and RESPONSIBILITIES:

1. Prepare tools and material needed in the project.
2. Assisting in assembly of scaffoldings and ladders
3. Assist in layout of wires and electrical pipes such as Conduit and PVC pipes
4. Chisel walls in preparation for utility box, junction box and electrical pipes
5. Putting guide wires inside the electrical pipes
6. Assist in pulling of wires and cables (electrical)
7. Install lighting fixtures, switches and wall outlets
8. Disassemble appliances needed for repair and maintenance
9. Provide assistance like holding, lifting, pulling whenever needed by Senior Electrician
10. Make sure that all tools are kept, secured and cleaning the workplace before leaving the Job Site

Trainings/Seminars:

Title: OCCUPATIONAL SAFETY Date Taken: November 10, 2005
Institute: MERALCO Foundation, Inc. No of Hours: 3
Location: Meralco Foundation Inc. Building Ortigas Avenue, Pasig City, Philippines

Title: ELECTRICAL SAFETY Date Taken: July 19, 2004
Institute: RERA Material Handling Corp. No of Hours: 8
Location: RERA Material Handling Corp. Molino –1, Bacoor, Cavite, Philippines

Title: BLUE PRINT READING Date Taken: January 6, 2003
[A basic hands-on program for Electrical Plan Layouts & Schematic Diagram Familiarization]
Institute: RERA Material Handling Corp.
Location: RERA Material Handling Corp., Unit 302, Reans Bldg., #93C Jose St., Malibay, Pasay City, Philippines

Title: BUILDING WIRING INSTALLATION Date Taken: October 2, 2002
Institute: RERA Material Handling Corp. No of Hours: 96 [on the job training]
Location: Mornese Center of Spirituality, Mamon Road, Pansol, Calamba City, Laguna, Philippines

Tools Managed:

* PLIERS
* LONG NOSE PIPES
* SIDE CUTTER
* SCREW DRIVER
* PHILIPS SCREW DRIVER
* HAMMER
* HACK SAW
* ALLEN KEY
* OPEN WRENCH
* BOX WRENCH
* COMBINATION WRENCH
* VICE GRIP
* CHANNEL LOCK
* MULTI TESTER
* ADJUSTABLE WRENCH
* SOLDERING GUN
* SOCKET WRENCH

Skills:

Basic typing (MS WORD)
Basic Internet

Educational Background

Highest Education

Vocational Course Taken: BUILDING WIRING INSTALLATIONS and MAINTENANCE
Name of School: MERALCO FOUNDATION, INCORPORATED (MFI)
Year Taken: September 11, 2005
Year Graduated: October 30, 2005
Location: Meralco Foundation Inc. Building Ortigas Avenue, Pasig City
Philippines

Short Course Taken: CALL CENTER PROFESSIONAL TRAINING in
COMMUNICATIONS SKILLS and AMERICAN ACCENT
Name of School: Informatics Computer Institute
Date Taken: June 2006
Date Graduated: July 2006
Location: 2/F Security Land Bldg., 6797 Rufino St., corner Ayala Ave., Makati City
Philippines

Character Reference:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1048)

Go to Search Parameters...

Brief Description

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! I have 28 years of production and reorganizing operations to maximize their production and maintenance.

Free! Working on projects for various E&P Companies and Contractors

Free! Mobile Crane operator,(Cert.) Production Controler,Driver, Boilermaker,Operating Machines

Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Free! instrumentation technician, control systems engineer, mining technologist

More than 20 years of exposure and experience in the construction, repair and maintenance of lighting and electrical power systems, and communication cables of buildings, yard lights, electrical motors, appliances, pumps, electrical equipment, transformers and gadgets;

What ever it takes to get the job done

Heavy Equipment mechanic with 30 plus yrs experience

Power Generation Manager / Technician

My education qualifications, career training, knowledge and acquired skills would be suited to position in your company (Former Soviet Union: Kazakhstan, Russia).

Structural/Pipewelder 20+ yrs.

Electrical Superintendent with 20 years of very diverse background

with Australia Visa Class BN Subclass 136 Skilled-Independent

experienced with service equipment, panelboards, breakers, fuses, disconnects,devices, conduit installation, branch circuits, lighting, motors, motor controls

Maintenance Supervisor/Maintenance Planner with 10 years experience. Proficiant in preventive maintenance and scheduling. Seeking employement on contract or time in & and out basis.

Solid skills in heavy equipment maintenance, pneumatic and hydraulics operations

I am currently employed as a contracts manager involved in all aspects of the mechanical piping industry. My back ground is Pipe Fitting and Welding.

Challenging position in Project Management in commercial, residential and government projects with career advancement.

Looking for Rig Welding work offshore

Sales /Marketing / New Business Development / Project /Product Manger .

Over 20 years of experience in diesel engines ,marine propulsion system and generator set working in the middle east and gulf region for more than 15 years U.A.E and Saudi driving license a valid resident in U.A.E read ,write ,speak English , Arabic ,German

Heavy Equipment Operator/Supervisor

Estimating project managing scheduling coordination with general owner to make sure schedule can be met purchasing preparing submittals laying out preparing ASI's RFI's RFP's completing project from start to punch list.

Master Carpenter with communication and management skills to provide quality work and services as a Floorhand for an employer.

Familiar with the local Plumbing Code. Have adept knowledge in operating required hand/power tools, test instrumentation and equipment required in a safe and approved manner. Understands and able to interpret piping CAD drawings/blueprints. Highly competent.

Strong organizational skills including efficient handling of administrative paperwork, and comprehension of verbal and written instruction. Collaborate easily with co-workers and work well independently. Excellent mechanical aptitude. Demonstrated ability to adapt to new equipement and technology.

Highly qualified, experienced & affiliated scaffolding coordinator/supervisor willing to relocate.

Able to perform awide variety of crafts

skilled tradesman.Mobile/Tower crane operator,Heavy duty equipment mechanic,Rigger,Inspector,Apprentice Millwright

Experienced design, layout & draftsman - architectural products, custom millwork & cabinet industry

I have experience in rigging, TIG (mirror welds), MIG, stick, fitting as well as blueprint reading and measurements, lead man, and safety experience.

Heavy equipment

After my apprenticeship training in Zimbabwe, I worked as a distribution electrician at voltages up to and including 132kV in various capacities. I was also involved in the training of apprentices, artisans and engineers, introducing them to the HV network. I am currently electrical tutor in the UK

Mill Operator, equipment operator, construction worker

Over 20 years experience in the coating’s industry. I have extensive experience in supervision, project management, and inspection of coatings.

Foreman Piping Installation (Australian Tradesman, Highly Skilled)

20 yrs welding, mig, flux, hard wire pulse, gouging, cutting torch, over head anduphill

Forklift, man lift, scaffolding, ladder, confined space entry personal protection equip. chlorine & h2s awareness, pre-task prevention & lock out / tag out

Mechanical Fitter

READY MIX CONCRETE

Experienced HVAC

My employment at present involves preventative maintenance, fault diagnostics and repairs on loading equipment and terminal automated system (TAS) within a fuel storage area.

Authorised to do switching linking safety testing and earthing upto 132kv. indoor swith gear upto 22kv

I am seeking a responsible position that is both challenging and an opportunity to share in the rewards of successful performance in an area where creativity and business experience will be of an immediate value to the organization. I have 25 years of electrical experience

Post of monitoring and evaluation Officer

I've attended Superior Traning in June 1987 and grauduated in June 1988. I have over 25yrs experince. And I attended Coastal Trucking in June 2006 and while I was in school I was driving for the company I work for, I have over 1yr dump truck driving and some tractor trailor experience.

Experience in Warehouse and Purchasing Activities for 5 years

Approved Electrician (BOSIT)

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out