Resume - 15 years as QA QC inspector from first piece lay out to final inspection of all ...

Misco Jobs

Resume #71887

CONTACT INFORMATION:
View contact information...

EXPERIENCE
07/2006 to 03/2008; QC/ QA Manager/ Manager Operational Support
Applied Fiber, 25 Garrett Drive Havana Fl. 32333
John Steadman, 1-850-539-7720
Responsible for entire Quality program of company. Wrote Quality Procedures and Quality Work instructions. Supervisor of 18 person production staff. Supervisor of machine shop. As Machine Shop Supervisor set up and ran Lathe and milling machine for repairs and manufacturing of company products. Plant Maintenance Supervisor,as Plant Maintenance Supervisor diagnosed electrical problems in various machines using Volt Meter,Ohms Meter and Ampere Meter. Able to follow electrical schematics. As Manager of operational Support, reduced company scrap from $5000/month to $500 month. Assisted in the plant lay out to streamline production area with skills learned from previous Kazann projects. This included the placement of machines and personnel to best fit the production level of the plant. Certified in tensile testing on Instron machine. Program writer for Instron machine.
2-2006 – 5-2006 Production Supervisor
Alcoa Aluminum, Tifton, Georgia
Supervise 5-person crew in the extrusion of aluminum products for various companies around the world. Used my Supervisor skills to increase the production on machine from 13,000 pounds in a 12 hour shift to 22,000 pounds. Using motivational skills and training in lean manufacturing. Used my Quality background to reduce the amount of scrap produced on press from 25% to less then 5% on my shift on press.
07/2001 to 12/2005; Metrology department/Lay-out Inspector
T.E.C.T.,
1211 Old Albany Road Thomasville Ga.31792
Kevin Lehman, 229-228-2612
Precision lay out of aircraft intake blades for P&W Engine Company and other jet engine manufactures. Responsible for complete layout for Government approval of entire order quantity of blades. Using surface plate, height gages, indicators, sine plates', comparator and C.M.M. to verify process sheets and Blue Print requirements in accordance with Customer Specifications and A.N.S.I.-14.5. Also responsible for the correlation of gages for the floor to hard lay out and C.M.M. Preformed gage R&R studies for production of large quantities of blades. Wrote programs on Measure Max software for the inspection of various stages of the machining process. Both in manual mode and in automatic mode. Have used some Cad Path files to create programs from customer-supplied models. Have basic use of Sheffnet C.M.M. systems, PC-DMIS software, and Basic skills in Form Fit. Have extensive Blue print interpretation skills. Have high level of calibration skills for comparators and Moment Weight Scales. Calibration of pressure gages and Torque wrenches as well as other measuring devises. Have written instructions for the proper use and calibration of inspection test equipment such as Indicators, Calipers,Micrometers,Digital Height gages and other hand inspection tools. Have extensive use of Gage calibration software Gagetrak. Worked hand and hand with Q.A. Engineering Department on corrective action for non-conforming gages and product.
04/1993 to 11/1993; C.M.M. Programmer;
Clarion Metals, Alcovy Road Covington Ga.30209;
Program C.M.M. using PC-DMIS software for the inspection of sheet metal components for the auto industry and other small manufactures of household products. Using Cad files and 3D pictures of items to do on line and off line inspections. Conducted audits on suppliers of raw materials for company, such as sheet stock and hardware for the assembly of finished products.
03/1992 to 05/2000; First Piece Inspector;
Jarco Airfoils, Boggs Road Duluth Ga.;
Layout Inspector and in process Inspector for Quality Department. Responsible for daily inspection of all products ran during the course of the day. Preformed inspection at various stages of product machining during day. Ran Brown & Sharpe C.M.M. for department on large aircraft intake blades for General Electric Company. Preformed process audits during the day to insure customer conformance. Proficient use of all hand tool and airfoil-tracing machine.
03/1987 to 04/1990; QC Manager;
Fluidionics, Glen Street West Babylon New York;
Inspection of all products manufactured by company with the use of hand tools. Reviewed all company contracts with both Government and small business for completeness and QA specs. Conducted all audits for outside vendors. Wrote all cause and corrective action reports for company. Reviewed all nonconforming products from out side vendors and conducted the material review board meetings. Handled all Source inspection from Government agencies and other companies for which contracts were granted.
07/1980 to 02/1985; Machinist C.N.C & manual machines;
Grumman Aerospace, Bethpage New York;
Set up and operate C.N.C. machine centers for production of aircraft wings and assemblies. Ran multi spindle machines as well as single spindle. Set up and operate manual lathe and milling machine for complex machine operations. Work in tool and die area as set up man for jig and fixture department.

EDUCATION
Lindenhurst High, Lindenhurst, New York; 1978 High School Diploma
Lewis A. Wilson Technical School, Deer Park, New York; No Degree in Airframe and Power Plant Certificate, 1978; out of GPA; Hours

PROFESSIONAL TRAINING
Giddens and Lewis, C.M.M. Programming basics,40 hours, spring 2003
Able Scale Company, Calibration and rebuilding,40 hours, summer 2003
Jones and Lamson, Comparator Calibration class, 15 hours fall 2003
Instron Testing, Set up program of tensile test machine Summer 2007 24 hours of training.18 mos. on job experience.

PROFESSIONAL LICENSES/CERTIFICATES
Certified in C.M.M. programming on Measure max software.2/2004
Certified in Tensile testing programming from Instron Corp.9/2007

U.S. Military Service Information
08//1978 to 05/1987 US Air Force
Honorable Discharge
Disabled Veteran
Retirement rank: SSGT 05-10-1987

OTHER INFORMATION
U.S.A.F.R. basic training on electrical tools and systems. Approximately 15 hours of oscilloscope training, testing of instrument panel clusters.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 1032)

Go to Search Parameters...

Brief Description

Revit Architecture, Auto LISP, Architectural Drafting, Auto CAD Drafting (2007 and 2008)

22 years in operations.

Experienced frame and finish carpenter with cabinet experience and management experience

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

Extensive expirence on multiple pieces of heavy equipment: track-hoe,dozer,back-hoe,scraper,8-15 ton carry deck cranes,fork-lifts&Lull/JLG,manflifts,Class "A" CDL A - NCCER Millwright,boilermaker,and rigging expirence as well

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

Caterpillar Dealership, Surface and Undergound Mining Experience.

Qualified Electrician- experience with pneumatics, air conditioning,smoke ventillation,contract plumbing, security and fire alarms,data wiring in domestic,commercial and industrial settings.

Experienced Mechanic, Have a wide range of experince from small engine to large diesel.I have a comercial drivers license and current DOT physical. Licensed Classes ABCD. Endorsements Hazmat, tanker, doubles and triples. I am also an experienced driver.

Looking for a plumbing position overseas

My functional areas of expertise include process improvement, risk management, regulatory compliance, accident reduction and claim investigation. In addition, I directed programs for Workers’ Compensation, EHS and DEP, ensuring compliance with State and Federal guidelines.

Electrician

Skilled Rigger and Crane Operator specializing in structual steel and installation of industrial machinery seeking challenging work 3 Years experience

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

ivil superintendent willing to travel owns fifth wheel current us passport

I HAVE BEEN INVOLVED WITH EQUIPMENT MAINTAINENCE ALL OF MY LIFE,AG/CONST BACKROUND 10 YEARS HEAVY EQUIPMENT EXPIERENCE 6 AS A FIELD TECH. LOOKING FOR AN OVERSEAS OPP.

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

PMP certified, PM and General management skills

Qualified Plumber & Gasfitter, Experience in Industrial Mining, Roofing and pipe work. Commercial Plumbing & Roofing,

pipe welder and structral welding

15 years as QA QC inspector from first piece lay out to final inspection of all machanical parts. Have been QA/QC manager as well as Operational Support Manager

Mechanical Fitter with 8 years of Experience

QUALIFIED, EXPERIENCED, OPERATOR

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

Objective: To work for a company as a Supervisor/Foreman/Journeyman carpenter. To use my skills to the best of my ability.

Construction Supervisor for Electrical and Instrumentation

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

HEAVEY DUTY DRIVER. (U.A.E) DUBAI, LIC.HOLDER

Just graduated from AVTEC Technical College in Seward, AK.

Commerical Truck Driver

Heavy Duty Diesel Mechanic/Fitter. 12 years experience with Volvo trucks and buses, hard working reliable skilled diesel technician.

Experienced Nine Year Superintendent Commerical / Residential

Application for the post of Excavator Operator

Employed as Sales Applications Engineer, I have supplied industrial, marine, mobile construction, process plant and aerospace markets pumps, valves, hydraulic & pneumatic components and systems since 1986.

maintenance millwright-28yrs. from trainee to maint. superintendent

My sckills cover a broad range of heavy equipment. Along with this I have made sure I have the safety skills needed to work in the Extreem Alaska enviroment.

C.A.W.I. PRESENTLY SEEKING C.W.I./BOILERMAKER FOREMAN

Industrial Construction Project Management

Fiber optics schooling

15 years of experience in design, technical assistance and consultancy for railways, highways, motorways, bridges, metallic structures, consolidation of slopes, arrangement of platforms. Experience in setting out, cost estimates and materials engineer.

Over 34 Years of experience in NDE Field.

Caterpillar diesel mechanic.

Field Service Mechanic

Free! Equipment Maintenance; Mechanical Experience; Fork-lift Certified; CDL

Electrician 309A

Sir, I have Passed Apprenticeship for 3yeas as Lineman (NCVT)and having 5years experience including 3yrs overseas experience in Maintenance and construction of 440v,11kv,22kv,33kv,110kv,132kv,220kv overhead Transmission & Distribution line.

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Experienced heavy equipment operator

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out