Resume - Millwright Supervision

Misco Jobs

Resume #73192

CONTACT INFORMATION:
View contact information...

Objective
Desire to play a key role in ensuring quality, safety, communication and commitment.

Qualifications
Quality Control and safety management Familiar with regulatory and safety compliance (OSHA, HAZMAT). Site inspections, product acceptance, documentation and reporting. Skilled in the methods and practices of industrial maintenance and mechanical repair in the construction and in-plant maintenance industries. Preventive maintenance. Familiar with test equipment and precision test instruments. Interpret and work from schematic, isometric and orthographic projection blueprint drawings. Ability to draw field sketches to communicate ideas. Layout and setting base and sole plates. Pre-alignment for drilling and tapping. Installation, troubleshooting and repair of heavy equipment, precision coupling alignment and installation. Overhaul of pumps, steam and combustion turbines, fans, gear boxes, generators, and various rotating equipment. Replacement and installation of bearings, seals, packing and fabrication of shims and gaskets. Alignment, conventional, reverse, laser and optical. Design and fabricate specialty jigs and or tools. Installation, troubleshooting, repair and maintenance of hydraulic and pneumatic systems, repairs on compressors. Building and installation of conveyors, repair and maintenance of belt and chain drives. Vibration analysis and pipe stress. Use of SMAW equipment for welding, cutting, heating and tool fabrication. Rigging-light, chain hoists to more heavy complex rigging and gantries. Operation of forklift, small and overhead cranes. Own hand and precision tools. Good physical strength and co-ordination with sufficient strength and stamina. Professional, honest, organized, dependable and punctual. Valid Driver's license. Available for travel and flexible shifts.

Education
Attained Millwright Apprenticeship.
Certified with BE&K.
Certified with Fluor Daniel.
NCCER National Certification.
8 hour OSHA.
NCCER Craft Trainer
Attended AWS Seminar for D1.1 and API

Relevant Experience
Millwright Supervision for Fluor Corporation, Immediate supervisor Joe Perry (Construction Manager) for the Wateree Operating Station for the SCE&G S02Compliance Project located in Eastover, SC. My responsibilities included but were not limited to daily reporting and inspections on work in progress. Coordinate problems and solutions between the site supplier, equipment Vendors and contractor. Coordinate work with piping Superintendent and other area Superintendents. Ordering of tool crib and any necessary tools and supplies. Oversee BOP and other maintenance of all rotating equipment on project. Review and oversee the storage, preventative maintenance and cleaning equipment prior to and during installation. Work under supervision and direction of the Project Superintendent during the construction, testing and startup of S02compliance equipment.

Millwright Supervision for Fluor Corporation, Immediate supervisor Gary Dobbins (Superintendent ) The Oak Grove Project a 1,600-megawatt, lignite-fired power plant in Robertson County. Much of the infrastructure is already in place from 30+ years prior. Much of the equipment is from the previous uncompleted project. My responsibilities include but are not limited to the installation of 27 coal pulverizers; some are B&W and some are Alstom. Installation of various fans and 2 preheaters. Maintaining and filing written reports and documentation, troubleshooting and quality control.
I am also a craft instructor for the NCCER Millwright Apprenticeship program on site.

Millwright Supervision for The Shaw Group, Inc., Immediate supervisor Lee Dowdy (Construction Manager) Installation of two scrubbers and Installation of nitrogen oxide control equipment on three units at Chesterfield Power Station in Chester, Va. for Dominion Power. Chesterfield power Station is an eight-unit, coal and natural gas fired co-generating station in Va. with a capacity of more than 1,700 megawatts. This equipment will lower the station's nitrogen oxide and sulfur dioxide emissions. My primary responsibilities included but were not limited to maintaining and filing written reports and documentation. Workflow and scheduling, troubleshooting and quality control. Ordering necessary supplies and tools, setting up tool trailers and parts inventory controls. Working with engineers and construction manager on schedules and 3 week look ahead.

Millwright Supervision for The Shaw Group, Inc. phone, Immediate supervisor Leon Carpenter (Superintendent) Installation of flue gas desulfurization equipment-commonly know as scrubbers for Duke Energy's Marshall Steam Station in NC. Marshall Steam Station is a four-unit, coal fired generating facility with a capacity of 2,090 megawatts. This equipment will lower the station's sulfur dioxide emissions by approximately 95 percent. Projected scheduled completion in 2006. My primary responsibility is overseeing the building and installation of the ball mill for this project. Other responsibilities included but were not limited to; training and instructing others on precision equipment and techniques in other areas of the project where needed. Maintaining and filing written reports and documentation. Workflow and scheduling, troubleshooting and quality control. Enforcement of codes and safety regulations. Close to 2 million safe man hours and ahead of schedule.

Millwright Supervision for S&B Construction phone, Immediate Supervisor Lonnie Greene (Superintendent) S&B and Bibb and Associates, Inc. executed this combined cycle project as a joint venture for the Hines Energy Complex Power Block III for Progress Energy near Bartow, FL. The project comprised the installation of two Siemens Westinghouse 501FD combustion turbines, two Nooter/Eriksen supplementary fired heat recovery steam generators with SCR and CO catalyst, a Siemens Westinghouse HE steam turbine, and dual fuel (natural gas and light liquid fuel). S&B had overall project management, purchasing, and construction responsibility. My primary responsibilities were the installation of various components on the combustion turbines and final stages of installation of the steam generators.

General Foreman for L-Con a division of Lexicon Inc. phone, (Superintendent)
Installation of a new Flue Gas Scrubbing System, 2-140,000 #/hr CO boilers, Deareator, Boiler Feedwater System, Cat Feed Hydro-Treater, Gas Compressor, Make-up Water System, FCC Gas Duct System and many other modifications, expansions and additions to the operating Valero refinery in Ardmore, OK. My primary responsibilities were all aspects in the installation of the Gas Compressor and the Deareator and Make-Up Water System on the Scrubber. Other responsibilities included but were not limited to; interpreting blueprints and drawings and schedule assignments to personnel assigned to my crew. Working closely with company reps and quality control inspectors. Maintaining and filing written reports and documentation. Enforcement of codes and safety regulations. Completed project on time despite some unexpected changes in design on an operating facility.

Other Experience
I have over 20 years of experience working in the industrial construction industry, from shutdowns to rebuilds and expansion projects, including grassroot projects. This experience includes but is not limited to working in chemical plants, refineries, geothermal plants, paper, power industries, and various processing plants. Some of the larger companies I have worked for are, Fluor Daniel, KBR, SW&B, BE&K, Midsouth Maintenance and Southern Industrial. Some of the more notable projects have been the installations of WFGD wet flu gas desulfurization equipment and ball mills of coal fired power plants. These installations were for Duke Power, Dominion Power, SCE&G and Progress Energy. Another notable project was the installation of three Westinghouse Co-Gen units in Harquahala, AZ for The Shaw Group, Inc.

Prior to working in the industrial construction industry, I worked several years in Millwright Maintenance for Dayton Walther Corporation in Dayton, OH. This is where I received my millwright apprenticeship and training. Responsibilities for this position included but were not limited to, preventive maintenance, troubleshooting and correcting mechanical problems which include pumps, compressors, valves and various rotating equipment and isolating electrical problems, including switch gears, motors and wiring.

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1024)

Go to Search Parameters...

Brief Description

Project Manager over $28 million project

Diploma in Industrial Safety Management , COMPUTER HARDWARE, SOFTWARE TROUBLESHOOTING AND NETWORKING

Estimator

I am a skilled and experienced heavy equipment operator with years of experience on various machine types. I have had asbestos training and would love to receive on the job training in crane operation..

Finish grade dozer op. expieriance w/loaders, excavators, pans, graders, and box-blade tractors in dirt and pipe.

Interested in Construction jobs.

Excavator, Showell, Dozzer etc. heavy machinery operator with 15 years of experience worked in India, Iraq, Kuwait, Dubai, Saudi-Arabia and Oman.

Masters degree in Management, 22years heavy construction

Licensed Journeyman welder, Interprovincial Red Seal attained. Alberta B Pressure WCB registered F3/F4 qualified, 4-position flux core (Flat, vertical, horizontal, ovehead), CSTS

NCCER/PLUS Pipefitter,boiler maker,iron worker...

Objective A position as Designer/Draughtsman/Estimator/Coordinator

Electrical foreman, superintendent, master electrician. Very familiar with NEC

Electical, plumbing, carpentry, building and ground maintenance as well as hvac experience

mig, 035 wire to 055 wire; fluxcore. 035 to 1/16 wire; stick. 7018 & 6011

I am searching for employment with a company that has satiability and longevity.

I am a CNC Operator and I can work through master cam or manual programming

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

Hard working person can easily adopt the environment and fast learner can also learn different fields of work and I am also willing to learn more for me to grow more as an individual

As a Laboratory Technician I have learned and trusted to operate the On-Site Analyzer machine, a first of its kind in my previous company. I also had an experience as a Vehicle Inspector Technician of both Heavy Equipment and Light Vehicle. From this, I become accustomed to maintain equipment and v

Certified journeyman plumber/pipefitter with overseas experience willing to travel

Welder-Fitter, CWB Supervisor, Millwright, CPR, First Aid,

Qualified Electrician, have management skills, 22 years post apprenticeship experience.

Millwright Supervision

Licensed Electrical Supervisor / Project Manager with 30 years experience

project in erection, maintenance and up gradation project of 40 MW power station and

5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines

I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.

MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.

I&E Supervisor/ Technician

Extensive experience in all phases of Industrial/Commercial Electrical Projects - Submittal Process - Project Specifications - Scope of Work - Manpower & Material Planning - Labor and Productivity improvement on budgeted hours - Timesheets and Construction Log Documentation - Strong knowledge of mec

I have 17 years experience in construction and mechanical applications and would like to explore overseas opportunities.

I have worked overseas and liked it. I have a pass port and a working visa for Brazil. I built a rollercoaster in Brazil. I had 30 carpenters and 15 helpers that didn't speak nor could i speak theirs. but we built the coaster.

See Attached Resume

Loading truck of material like gravel and sand

I am applying to your company in the hopes of securing a position as an excavator operator. Ten years as an operator has given me extensive experience on a wide variety of machines and I am extremely safety orientated. My time working along side the Ministry of Environment as well as Fisheries and

Currently have certifications as Certified Welding inspector AWS (CWI), Certified Mechanical Inspector per American Society for Quality Control (ASQC), PCI Level II (Precast/Prestressed Concrete Institute), and Level II Magnetic Particle (MT).

3 year Trade Certification course NCVT of Mech. Draughtsman in 1997, Last 10 years engaged in the field of HVAC. Experience of star hotels, hospitals, multi-storey buildings, pharmaceutical and chemical companies. Ability to explore and learn new things. Ability to design, plan and implement ideas.

Welding, fabrication, mechanic, maintenance, hydraulics, pipe fitter, painter, cpr, oshkosh heavy equipment operator, spill response training.

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent

My most recent experience was repair and maintenance on board a Tanker vessel, Livestock and Reefer Ship. I was responsible for all the hot work and repair, including the use of Manual lathe machine

Autocad drafter

Duties and Responsibilities:

Electricial field 18 years, licensed journeyman since 1992, residential, commercial and industrial

I am confident , professional heavy equipment operator , with over 15 years experience in a wide range of fields .

Electronics security engineer

JOURNEYMEN ELECTRICIAN

2D and 3D CAD proffecient

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out