Resume - Timed served Mechanic with safety certification and good leadership skills

Misco Jobs

Resume #77123

CONTACT INFORMATION:
View contact information...

As a former military mechanic with the Royal Electrical and Mechanical Engineers (R.E.M.E) I have a sound technical knowledge regarding the inspection, maintenance and repair of Diesel engines, B vehicles and tracked plant. Combined with the management and organisational skills that I have developed over the last 12 years both within the military and from setting up and running my own business, and also from handling small teams with a strict deadline, I bring with me both the experience of implementing health and safety on the shop floor and in arduous working environments and skill set to undertake various positions. Having gained certification in both OSHA and NEBOSH it has brought together my skill set and will allow me to progress further my health and safety portfolio. I have recently been accepted into the International Institute of Risk and Safety Management (IIRSM) also I am studying for my HNC in mechanical engineering ( correspondence course ).

Work Experience

Techno Service Nederland (T.S.N) - Current Position.

* Mechanic.
Service and general maintenance, of large vehicles. ( PSV)
Leyland DAF, Mercedes, Scania,

General Dynamics Land Systems. November 2007 – September 2008

* Battle damage repair of STRYKER variants (Middle East)
Working with a small team, rebuilding battle damaged STRYKER vehicles, within a large mechanical workshop.
Receiving vehicles with considerable combat damage, cleaning to remove any bio hazard materials, stripping the vehicle ready for hull reconstruction and a full rebuild to factory standard for resale to the US military. Due to the inherent risk involved from unexploded munitions, bio hazard and standard industrial risks, I was responsible for ensuring that a safe system of work was developed for each individual vehicle. Initially the vehicle was treated as a confined space and access restricted to only essential workers. All completed to a strict deadline to ensure immediate return to combat troops, and realising maximum profit from the task undertaken, with the minimum work week in excess of 80 hours in 30+ degrees.

TXM Recruitment- (ABRO-Sennybridge) – August 2007 – September 2007

* Service and repair of British Army equipment
Working independently within a busy workshop completing the mandatory regular servicing, repairs and major assembly replacement for the Army units. The workshop strictly enforced its health and safety policy and maintained a high standard of work at all times.

Allegis group: - April 2007 – August 2007

* Development and implementation of generator set maintenance schedule US military Germany.
Developing the maintenance schedule for an aviation unit within the U.S military and implementing it with the aim of completing the contract within 18 months, using both military and civilian workers from the local economy and overseas. The role involved tracking the equipment, building a database to incorporate both regular service intervals and complete overhauls within budget and time constraints permitted by the military, ensuring that equipment was available at extreme short notice for battle damage replacement.

Self employed (Al's ice cream) January 2005 to February 2007

* Set up and run a successful ice cream vending business.
Started Al's ice cream as a project to develop my business skills, starting with a garage full of second hand equipment I fabricated a vehicle and built up a comprehensive business plan and went on to run a profitable business on a small scale for two years.
I sold the assets for profit and wound the business up to return to a mechanical workshop environment.

Parts supply company (John Rickard Autos) January 2002 – December 2004

* Implementing service schedule- providing the company with 100% availability of delivery vehicles by providing a service schedule designed to work within a fast moving company.
* Technical advice – providing advice for customers on the options available for the service equipment and specialist tools available for a wide range of non commercial vehicles.
* Customer relations- Face to face contact with customers with regards to quality of service and deal with any issues they may have with the invoicing.

British army (Royal Electrical and Mechanical Engineers)
December 1995 – June 2001

* Stand in artificer vehicles Bosnia 1999- Ran a Light Aid Detachment for a Scimitar squadron having to maintain 100% availability on the tracked armoured vehicles for operational duties.
* Challenger MBT – service, recovery and repair of running gear and main assemblies.
* CVR (T) – Inspection, service, recovery and repair of every aspect of this tracked vehicle including the ability to strip and rebuild TN15 epicyclic gearbox. Also a member of the dieselisation team tasked with converting the J60 petrol driven vehicle to the Cummins diesel.
* L/Rover – inspection, service, recovery and repair of every aspect of the vehicle.
* 430 series of vehicles, Leyland daf, HVM Stormer and various other vehicles and equipment.
* Junior Military Certificate (JMC) junior management course in the management of people in arduous conditions, workshop environments and teaching/instructor skills.
As a junior NCO (non commissioned officer) within the R.E.M.E my role was varied and demanding ranging from maintenance within a large industrial type workshop to recovery of vehicles from mine fields in the former Yugoslavia. Also as an NCO I would be responsible for a team of men to undertake the above tasks, while maintaining high level of quality, also ensuring health and safety regulations were adhered to in the workshop environment.

Qualifications

* City and Guild motor vehicle craft
* R.E.M.E Certificate of trade proficiency
* NEBOSH IGC Certificate (to be confirmed)
* OSHA safety officer
* OSHA 30-hour General industry safety and health
* OSHA 30-hour Construction industry safety and health
* Medic first aid ( CPR )
* Medic first aid ( Blood borne pathogens )
* Basic fire warden as per NFPA standard
* Crane operators certificate of competence o Gantry o AFV 434 HIAB
o B-ford 8t CALM (ATLAS)
* Part 2 signals RAC AFV
* Junior military certificate ( military junior management and instructor/teaching skills )
* ADR-Vocational training certificate for drivers of vehicles carrying dangerous goods-
Other than in tanks class 1, 2 and 3. ( expired 27/11/2002 )
* GCSE ( Maths, Chemistry, Biology, Physics, English, Welsh, Art, Geography, CDT)
Relevant personal experience

* Initial planning, funding and logistics of Cape to Cape challenge, racing from Nordkapp, Norway to Cape Tariffa, Spain. (Winning team)
* PADI Advanced open water diver
* Integral part of extensive over landing expedition to Southern Africa. ( Kenya, Tanzania, Zambia, Botswana and South Africa ) Initial vehicle procurement, full expedition service and maintenance and local parts purchasing within budget limitations.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1094)

Go to Search Parameters...

Brief Description

Scaffolding supervisor, 12 years experience in oil and gas projects, international experience, 200+ staff on last project, teaching to locals experience

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

Crane Driver, Rigger, Scaffolder, Dogman, Multi-skilled operator, Shutdown & Construction experienced.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Good analytical mind, good communication skill, result oriented and team player.

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

a young engineer who has versatile knowledge in mechanical engineering , marine engineering and electrical wiring/installation(domestic and industrial)

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.Familiar with Material Inspection, dimensional check and documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516etc.

Underground hardrock miner common core

Yokogawa- Centum CS-3000,CS1000 DCS,Triconex(Invensys) – Tricon & Trident PLC (Emergency Shutdown System),HIMA PLC (Emergency Shutdown System),Emerson Process Management -Delta-V DCS,Yokogawa-Prosafe PLC ( Fire & Gas Detection System, Emergency Shutdown System ),ESD,F&G

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations supervisor or as an inspector. I have over 25 years experience in the natural gas transmission and distribution pipeline industry.

Skills: electronics mech (technician) S.M.t component repairing and touch up through whole component assemble, soldering work and production supervision , testing of electronics tuner with the help of oscilloscope, fault finding etc Qualification: Under Graduate and 2 year diploma in electronics

8 Years extensive experience in QA/QC inc: India and overseas.

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Looking for any position with good pay and benefits

Sales and Office Administration for Steel Manufacturing Firm

I have worked in natural gas and oil production plants where duties included both operating and repairing associated equipment. I know how to operate most tools, heavy equipment and can fabricate a lot of my own parts.

Biomedical Engineer

Repairs, maintenance, wiring, troubleshooting schematic diagrams of cattlepillar control panel, wiring of the three phase starters e.g. star delta, rotor resistance starters, auto transformers, direct online starters, servicing and installing three phase motors, service of caterpillar alternators.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

I've almost 15 years of experience in inspection (construction like pipeline onshore, offshore, fabrication of pressure vessel, plant piping, and structures component.

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

OSHA, Honesty, Windows, Ability to work with others, MSDS, Multi-tasking, Word, Detail Oriented, Forklift, Patience, Excel, High work standards & ethics, Safety Awareness, Leadership, Access, Results Oriented

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Quality dozer/blade/excavator operator in all aspects of construction

Rigger crane op scaf

Catering Management

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

Buyer/Purchasing Administrator, Planner/Scheduler, Sub Contract/Coordinator

With over 4 years experience in Quality Control & Assurance also in Inspection application & method. Demonstrated capability of technical expertise to ensure the quality of work accodance with Specification, code or standard, and to make sure the schedule of work on time.

Process/Electronic Technician

Other than my recent employment my background includes but not limited to: 5+ years in drilling and work over rig experience, I’ve spent at least 1 or more years working or training in every position, 1 year as floor and motorman, 3 years as derrickman

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

NDT

Administration, Marketing, Operations & Computers

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management ,Purchase / Supply Chain Management,Business Development,,Material Management

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Supervision, planning, scheduling, coordination, operation & maintenance (proactive & reactive), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities, Auto CAD, ISO 9001

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Heavy Eqiupment Operator,Construction,

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out