Resume - Heavy Eqiupment Operator,Construction,

Misco Jobs

Resume #77259

CONTACT INFORMATION:
View contact information...

I am compiling this resume in order to enable my perspective employer to fully understand the range and scope of my skills and experience. As well as to show my use of and skills with a variety of complex, complicated and possibly dangerous tools safely, Also to exhibit my ability to supervise as many as (7) skilled craftsman while performing my own tasks.

RELATED EXPERIENCES:
From 05/08 to 11/08:
I worked for A and B Marketing: 6500 Bowden Rd. Jacksonville FL. 32254 Ph.904-268-0033. I worked as a Lead Generator for this Rainsoft Distributor under Shirley Murphy. I also for a short few weeks sold Rainsoft water conditioning systems. I found that I was not suited for this line of work.

From: 04/06 to Present:

As a self-employed remodeler I provided my clients with most aspects of the field:
Plaster/ Sheetrock: Install, repair and as well as prime and paint.
Flooring: Repair and restore Hardwood floors; Prepare surfaces and install ceramic, porcelain and stone tile.
Plumbing: Replace copper and galvanized pipe with PVC and CPVC. Change out, repair, and replace and install kitchen and bath fixtures, sinks, toilets, bathtubs, and showers.
Basic Electrical: Run wire from a junction box down the wall to a switch, then back up to a new ceiling fixture. Replace switches, outlets and anchored and installed ceiling fans.
Transform a (2) car garage into a studio office with a shower bathroom, including pouring a concrete floor with a crew, supervising Electricians and Plumbers while managing a crew of (3). At one point I was overseeing the removal of the electrical panel from the house to an outside wall, while 220 service was being run under ground, to accommodate a tankless water heater, and a crew of plumbers were repairing and connecting the sewage pipes from the house and studio to city service. And getting the sheetrock mudded, the carriage doors installed on the face of the garage, and the Lord knows what else!

From: 03/03 to04/06
Under Nick Humphress of Neighborhood Nick @ 2759 Green St. Jacksonville Fl. Ph# 374-9505 or 509-6121 (cell) I performed all aspects of home repair and remodeling, including trim carpentry I also acted as On-site manager for up to (3) craftsman.

OTHER EXPERIENCES;

From 05/00 to 03/03:
Florida Rock Ind. Inc. 700 Palmetto Dr. Jacksonville. Fl.32236
Plant Manager: George Newman ph# 545-2643 (home)
I operated a concrete mixer truck at all hours of the day and night on residential and commercial pours.

From 01/00 to 05/00:
Various jobs; Burger King (cook) and Amelia Island Plantation (housekeeper)

From 08/99 to 01/00:
Personnel Department Inc. 1234 Williston Rd. S. Burlington Vt. Ph# 802-865-4243
Temporary labor: stocking shelves for Office Depot and Bon Ton.

From 06/98 to08/99:
Professional Nursing Services: Pace Office Building, Suite 100B. S. Winooski Ave. Winooski Vt. Ph#802-655-7111
Title: Traumatic Brain Injury Certified, Licensed Nurses Assistant.
Supervisor: Fran Greenhalgh RN. AS. TBI.
I assisted TBI. Clients in redeveloping life skills with the goal of enabling them to return to self sufficiency.

From 01/91 to 06/98:
Green Mountain Nursing Home, 1102 Ethan Allen Ave. Colchester Vt. 05446 Ph# 802-655-1025
Title: Licensed Nurses Assistant
Supervisor: Betty Rhoades RN. DNS.
All areas of Long term care on (3) shifts.

REFERENCES:
Professional: Roger A. Moss, Pacific Bridge Realty. 2755 Riverwood Ln. Jacksonville Fl. 32207 Ph#904-887-4166. Olin Cannon, Cannon Plumbing Inc. 217 Trout River Dr. Jacksonville Fl. Ph#904-343-4344.
E. Shane Whitemore, Property Manager CSX Transportation. Ph# 904-556-4426.

Personal: Tina Anderson, (Mentor) Ph# 904-389-5125. Chris and Lori Terpak-Smith (Friends) Ph# 904-389-4669.

Equipment Operated:
Farm Tractors: Massey Furgeson, International Harvester, Allis Chalmers, Belarus.
Other Farm Equipment: Grain Mixers, Hay Mowers, Rakers, Tedders, Balers, Harvest Wagons and Manure Spreader, also Silo Feeders and Fillers, as well as Milking Machinery.
Other Equipment: Front-/end Loaders,Scrapers/Pans, Vibratory compactors, Forklift, and Bob Cats.

Tools Used:
Proficiently: Chain, Circular, Jig, Reciprocating, Miter, and Wet/Tile Saws, Drills, Grinders, Sanders, including Drum and Orbital floor Sanders, Buffers, Trim Nailers, Ladders, and Scaffolding.
Familiar With: Table saws, Routers, Jackhammers, Floor Jacks and Paint Sprayers.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1093)

Go to Search Parameters...

Brief Description

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

Crane Driver, Rigger, Scaffolder, Dogman, Multi-skilled operator, Shutdown & Construction experienced.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Good analytical mind, good communication skill, result oriented and team player.

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

a young engineer who has versatile knowledge in mechanical engineering , marine engineering and electrical wiring/installation(domestic and industrial)

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.Familiar with Material Inspection, dimensional check and documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516etc.

Underground hardrock miner common core

Yokogawa- Centum CS-3000,CS1000 DCS,Triconex(Invensys) – Tricon & Trident PLC (Emergency Shutdown System),HIMA PLC (Emergency Shutdown System),Emerson Process Management -Delta-V DCS,Yokogawa-Prosafe PLC ( Fire & Gas Detection System, Emergency Shutdown System ),ESD,F&G

My objective is to secure a challenging position in the natural gas, oil or petroleum pipeline industries as an operations supervisor or as an inspector. I have over 25 years experience in the natural gas transmission and distribution pipeline industry.

Skills: electronics mech (technician) S.M.t component repairing and touch up through whole component assemble, soldering work and production supervision , testing of electronics tuner with the help of oscilloscope, fault finding etc Qualification: Under Graduate and 2 year diploma in electronics

8 Years extensive experience in QA/QC inc: India and overseas.

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Looking for any position with good pay and benefits

Sales and Office Administration for Steel Manufacturing Firm

I have worked in natural gas and oil production plants where duties included both operating and repairing associated equipment. I know how to operate most tools, heavy equipment and can fabricate a lot of my own parts.

Biomedical Engineer

Repairs, maintenance, wiring, troubleshooting schematic diagrams of cattlepillar control panel, wiring of the three phase starters e.g. star delta, rotor resistance starters, auto transformers, direct online starters, servicing and installing three phase motors, service of caterpillar alternators.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

I've almost 15 years of experience in inspection (construction like pipeline onshore, offshore, fabrication of pressure vessel, plant piping, and structures component.

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

OSHA, Honesty, Windows, Ability to work with others, MSDS, Multi-tasking, Word, Detail Oriented, Forklift, Patience, Excel, High work standards & ethics, Safety Awareness, Leadership, Access, Results Oriented

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Quality dozer/blade/excavator operator in all aspects of construction

Rigger crane op scaf

Catering Management

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

Buyer/Purchasing Administrator, Planner/Scheduler, Sub Contract/Coordinator

With over 4 years experience in Quality Control & Assurance also in Inspection application & method. Demonstrated capability of technical expertise to ensure the quality of work accodance with Specification, code or standard, and to make sure the schedule of work on time.

Process/Electronic Technician

Other than my recent employment my background includes but not limited to: 5+ years in drilling and work over rig experience, I’ve spent at least 1 or more years working or training in every position, 1 year as floor and motorman, 3 years as derrickman

I have over 27 yrs Elect/Inst experience on industrial and commercial projects throughout the US and Saudi Arabia.

I've worked the oilfields for a very long time off and on, I know pretty much everything there is to know, I'm a leader and do the best I can do

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

NDT

Administration, Marketing, Operations & Computers

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management ,Purchase / Supply Chain Management,Business Development,,Material Management

Cost Engineering / Schedule development and control, Estimating, perfect computer knowledge (programming level). AACEI member. English, Russian, Japanese languages knowledge. 7 years of working experience. Degree in international business administration.

I have qualified N3 in 1998, I worked for Catterpillar and worked my self up to Service Manager, I've been a Group Plant manage, Currently working in the DRC on the Copperbelt as Maintenance Manager.

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Supervision, planning, scheduling, coordination, operation & maintenance (proactive & reactive), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities, Auto CAD, ISO 9001

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Heavy Eqiupment Operator,Construction,

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out