Resume - Safety Manager

Misco Jobs

Resume #77295

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To obtain a position with a well established company that recognizes potential based upon performance and achievement, that can best use my skills in the safety and construction industry.

EXPERIENCE:

4/2007- 11/2008
Barnhart Crane and Rigging
Oakridge, TN
Industry: Construction
Safety Manager
Ran safety program building wind turbines in NW Missouri, Michigan, Texas, southern California, Oklahoma, Oregon and New York. Duties included: New hire orientations, daily safety walks, OSHA and state paperwork, company paperwork, medical management, weekly safety meetings, daily Plan of the Day meetings. ETC.

1/2007- 4/2007
Roadtex Transportation
El Reno, OK
Industry: Transportation
Driver
Hauled produce from California to New Jersey, and back again

4/2006- 12/2006
Lu Greg Trucking
Kingfisher, OK
Industry: Oil Field
Driver
Ran pump truck on location. Usually pulling water of bottom of oil tanks and hauling to disposal. Hauled oil to refineries.

8/2005- 4/2006
Weatherford Fracturing Technologies
El Reno, OK
Industry: Oil Field
Operator
Operated chemical additive unit during downhole fracturing jobs. had to drive to location, Rigg up, pump job, Rigg down. give me a good understanding of the oilfield industry

8/2004- 7/2005
Atlanta CSO Constructors
Atlanta, GA
Industry: Construction
Safety Representative
Helped manage safety program on a 210 million dollar tunnel project in downtown Atlanta. Work consisted of daily job walks/ inspections, OSHA/ company paperwork, Weekly Safety meetings, Medical Management, fall protection inspections, Etc. Just worked 60,000 manhours with no lost time or recordables.

12/2003 - 8/2004
Western Summit Constructors Inc.
Denver, Co
Industry: Construction
Safety Management
Came back after graduation, to serve as safety manager on the water treatment plant until it's completion. Did all paper work, jobsite inspections, etc. I was the only safety on the job.

5/2003 - 8/2003
Western Summit Constructors Inc.
Denver, CO
Safety Intern
I helped run safety program on an industrial water treatment facility in Buford, Ga. Really helped put all the book work to the field and experience I already had.

10/2001 - 5/2002
Oakridge Builders
Tulsa, OK
Field Engineer
Helped Superintendent make sure work was done according to Blueprints and Specifications gon3/2001 - 10/2001
BRYAN ADAIR CONCRETE CONSTRUCTION
Broken Arrow, OK
Carpenter/ Superintendent
* Build, tear down forms
* Layout
* Supervision

2/2001 - 5/2001
CAPSTONE BUILDING CORPORATION
Birmingham, AL
Internship
* Helped build 5 building residential project on campus.
* Layout
* Supervision

11/1998 - 5/1999
LANGSTON'S WESTERN WEAR
Oklahoma City, OK
Salesman
* Sales
* Employee training
Supervision of new employee's

5/1997 - 10/1997
SAYLER HARVESTING
Artas, SD
Operated and maintained heavy machinery
* Operated harvesting equipment
* Traveled from Oklahoma to Manitoba, Canada
EDUCATION: 12/2003 Northeastern State University US-OK-Tahlequah
Bachelor's Degree
Studied in depth the safety profession.
Hazard Analysis, msds, etc.

8/2001 Oklahoma State University- Okmulgee US-Oklahoma-Okmulgee
Associate Degree
Learned the office part of the commercial construction industry, Estimating and bidding, to Interior Finishes and final close out.

QUALIFICATIONS First Aid CPR trainer
Trenching shoring certified
Crosby Rigging Trained
Confined space training
OSHA 500 (train the trainer)
Preparing to sit for ASP/CSP

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1085)

Go to Search Parameters...

Brief Description

An experienced planner, purchaser and qualified welder/instructor as per NAVSEA/DoD standards in SMAW, GMAW, GTAW. With eleven years of US military experience, a Bachelors Degree in Mechanical Engineering (Inter-American University of Puerto Rico, 1998), fully bi-lingual (English/Spanish)

I am skilled in carpentry, concrete forming, metal studs and drywall, scaffolding, etc. However, I also have expeirence in reading blueprints and filing out reports.

With Engineering degree and experience in Construction of Petrochemical, Gas Plant and MODU (Jack-up and Semi--Submersible) in the field of Piping, Welding and Painting. Can be able to work either in Engineering, Supervision and Inspection works.

Water well driller, T4, TH60, CP RT1800, Air & mud rotary, DTH, Under reaming

To collect quotations from parties. Mainly three quotation for single items And prepares relevant comparison sheets.

Electrician management

•A proven track record of success in international construction projects spanning 14 years. Highly capable in any role from hands on tradesperson to Project Management. Certification in a trade (Plumbing) and a Civil engineering diploma.

Over 20 years experience in the coating’s industry. I have extensive experience in supervision, project management, and inspection of coatings.

Working as a Site manager / Supervisor / Inspector of Scaffolding & Rigging. Having extensive 20 years working experience in the respective fields.

Thorough knowledge of the operational characteristics and capabilities of heavy construction equipment to include, but not limited to cranes, backhoes, front – end loaders, dump trucks etc.

Experienced HVAC

My employment at present involves preventative maintenance, fault diagnostics and repairs on loading equipment and terminal automated system (TAS) within a fuel storage area.

Responsible for Receiving, Storing, Issuing, Stock Inventory for all types of Materials for M/s TECHNIP, BECHTEL, GASCO, NPCC (Piping, Instrument, Electrical, Structural steel, Equipments etc. Maintaining uptodate stock Records updating stock

Auto Electrician, Auto Mechanic, Heavy Equipment Mechanic

Safety Manager

Quality control inspector

I am seeking a responsible position that is both challenging and an opportunity to share in the rewards of successful performance in an area where creativity and business experience will be of an immediate value to the organization. I have 25 years of electrical experience

Senior Construction Project Manager

Worked In Cama Motor ¡V A¡¦ bad as Diesel & Petrol Mechanic under Apprentice Act 1956 for 1 year [i.e: 01/10/2005 to 30/09/2006].

Time served and fully qualified NVQ 3 Rigging & Lifting Supervisor, appointed person, trained trainer, with over 30 years behind me in the industry on and offshore, on many world wide locations.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

Preparation of documents, materials,and equipments.hauling of materials., Schedulling works. fabricate, erection, installation.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

Heavy equipment operater excavater,backhoe any controls, all dozers, scrapers, finish blade hand project manager,estimater, under pipe line superintendant,mass grading superintendent

Coatings Contractor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning both at home and abroad, onshore and offshore.

API-510 / AWS-CWI

profficient in construction administration: forrensically challenged change orders, estimating, cosy analysis, site supervision, pre con and pre bid meetings, bid analysis, plan reading, and quality assurance

Safety Director, Electrical Construction

Construction Resumé

Welder ***16 Years Experience***

Coordinating the efforts of the technical staff assigned to the project, planning, assigning, reviewing, evaluating and training staff in work procedures;

I have Thirty (30) years of experience in the surveying field, to include Boundary surveying,

Fork Lift Operator and Material Handler

Seeking work as heavy equipment operator. Willing to travel. Excellant references.

Electrician Technician

QUANTITY SURVEYOR

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

I’m experienced metal fabricator/boilermaker with skills in fabrication, assembling, constructing, installing, erecting, demolish, repair, marking out, aligning and maintaining a wide variety of vessels, tanks, towers, boilers, hoists and other structures.

Qualified welder 10 years experience ( QC, NB, AB) pipe welder , willing to travel

I am a 29 year old white Kenyan. I am a Logistics consultant specializing in Warehousing and Mechanical handling training.

looking for work in the electrical field. 19 years exp. 3yrs. as an owner

Heavy Equipment Operator

Arc welding all positions all 60 series, 70 series, and 80 series welding rods. Torching and brazing. Rigging of all materials over head either from crane or chain falls or sky track indoor and outdoor. Certified in erecting scaffling. Excellent in layout for installations. Certified in rigging, aer

Journeyman Plumber and Gasfitter

Maintenance Manager/Welder Skills include Management, Design, welding, machinist, hydraulics, electrical, HVAC, mechanical, fabrication,and construction.

Responsible all electrical installations, wiring, piping, motor control

More than 18 years of experience of welding operation such as Supervision & QA/QC Department in Power Plant, Refinery Plant, Petrochemical Plant, & GAS plant.

Graduate Civil Engineer from a reputed institution of India having experience in Quantity Survey & Contracts in projects across the Gulf, currently working with one of the premier infrastructure companies of the Middle East, seeking suitable long term career opportunities.

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out