Resume - For the past 11 (Eleven) years of my working experience as Equipment Site Superv...

Misco Jobs

Resume #77496

CONTACT INFORMATION:
View contact information...

My areas of expertise are Preservation, Installation, Inspection& Verification of Rotary Equipment, Static Equipment, Equipment Internals, Air fin coolers, Surface condensers etc.

Inspection for Preservation of Equipment include N2 pressure, Sacrificial Anode installation, Desiccants / VPCI Powder, Telltale hole grease lubrication, Paint Damage, Closed condition of Flanges/openings, Grease lubrication of machined parts, Bearing housing oil level, Periodic shaft turn, Storing of Plunger & valve components, Space heater energize of motor, Storing of spare rotor & parts, etc.

Installation & Inspection for Rotary Equipment include Padding, Elevation, Position, Orientation, Levelness, Pre.shaft alignment, Run-out, Void, Pipe Strain, Motor / Turbine solo run, Final shaft alignment, Prep. of Graph, Impeller & casing wear ring machining / clearance inspection at work shop, Lube oil Flushing Inspection, Mechanical Running test, Completion of inspection records etc.

Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Pressure Testing, Loading of catalyst, chemicals, Support balls, Vessel Box-up, etc.

Installation & Inspection of Air Fin Cooler & Air cooled surface condenser include Alignment of setting plate, structure, tube bundle, louver, shaft, pulley, Blade Angle, Tip clearance, Belt tension, pressure testing / Dew point inspection for tube bundles, solo run of motor, Completion of inspection records etc.

Experienced in issuing of NCR/DR against non-conforming products/methods during construction activities.

Experienced in preparation/verification of ITP, QCP & Method statements for the Installation & Inspection of Equipment.

Familiar with code & standards Borouge API, Aramco. QP, Shell DEP, PIP VEFV, Tema etc.

Rotary Equipment Experience with: -
Turbine / Compressor ¡V GE Thermodyne, Siemens, Manessman-Demag-Delaval, Dresser Rand, Ingersoll Rand, Mitsui, Kobelco, Man Turbo, Mitsubishi, Nuovo Pignone, Thomassen, BC Howden, Elliott Ebara, GE Rotoflow, Technofrigo etc.
Pumps ¡V Flowserve, Gabbioneta, Sulzer, Ebara, Nikkiso, Sundyne, Sundstrand, Teikoku, Goulds, Viking, Nippon, Cryostar, Gorman-Rupp, MTH, Thompson, HMD Kontro etc.

Work Experience September 2008 ¡V Till Date
ABS Group Inc. (EU 2 Project, Borouge 2, Ruwais, Abu Dhabi).

Technical Representative (IPMT Inspector) ¡V Static & Rotary Equipment
EU 2 Project for Borouge is a Joint Venture of Adnoc & Borealis.

Duties & Responsibilities
1 Reporting to QA/QC Regional Verification Manager.
2 Review & verification of ITP, Method statements etc.
3 Field inspection of the installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
4 Accepting/Rejecting the inspection result based on standard criteria
5 Attending IPMT weekly meeting on construction & QC overview.
6 Preparation of NCR & following up if necessary.
7 Conduct Frequent Audit on material storage, Preservation, Construction, Inspection etc.
8 Review & verification of all records during final closure & hand over.

September 2006 ¡V August 2008.
JGC Arabia Ltd., Rabigh Olefin Plants Project, Kingdom of Saudi Arabia.

Senior QC Inspector ¡V Static & Rotary Equipment
Rabigh Olefin Plants Project for Petro Rabigh is a Joint Venture of Saudi Aramco & Sumitomo-Japan, which consist of HOFCC & EC.

Duties & Responsibilities
1 Reporting to Field QA/QC Deputy Manager.
2 Verify documents attached to RFI, if it's comply with the drawing & document revision
„X Field inspection of the installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
3 Accepting/Rejecting the inspection result based on standard criteria
4 Attending QC meetings with all updated status.
5 Preparation of NCR & following up.
6 Review & verification of all records during final closure & hand over.

March 2005 ¡V July 2006
Consortium-Astaldi Arabia Ltd & NSH Co. Ltd. C/O Technip Italy S.p.A.
ORYX GTL Project ¡V Raslaffan. Qatar.

Lead Supervisor ¡V Static & Rotary Equipment
ORYX GTL (Gas to Liquid) project is a Joint Venture of SASOL & QP, which consist of Liquid Oxygen, Hydrogen Production, Hydro Cracking, Syngas Production and Utilities.
Duties & Responsibilities
1 Organize & direct the site Installation & alignment activities.
2 Verify the latest revision of Drawings & Documents.
3 Preparation of Method statements for Equipment installation.
4 Field installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
5 Conducting daily Safety toolbox talks.
6 Updating the Installation status for Progress meetings.
7 Coordinate with QC & Field Engineering Section.

June 2003 ¡V January 2005
Seeyen Engineering Co. Pvt. Ltd. Digboi Refinery ¡V Phase II, Assam

QC Supervisor ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Reporting to QA/QC Manager
2 Preparation of QCP, ITP etc. for Installation & Inspection of Static & Rotary Equipment.
3 Supervising the Inspector's activities & verification of records.
4 Attending QC weekly meetings.
5 Solving the site installation problems based on related standards/other relevant documents.
6 Verification of Method Statements submits by construction.
7 Bore scope Inspection for Centrifugal compressor internals & any necessary rectification.

June 2002 ¡V May 2003
Seeyen Engineering Co. Pvt. Ltd. Tinsukia Fertilizers, Assam

QC Supervisor ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Reporting to QC Manager
2 Preparation of QCP, ITP etc. for Installation & Inspection of Static & Rotary Equipment.
3 Supervising the Inspector's activities & verification of records.
4 Attending QC weekly meetings.
5 Solving the site installation problems based on related standards/other relevant documents.
6 Verification of Method Statements submits by construction.

November 2000 ¡V March 2002
NSH Co. Ltd., C/O Joint Venture - Snamprogetti S.p.A. & Hyundai Engg.Co.Ltd.
NGL-4 Plant ¡V Umm said-Mesaieed ¡V Qatar, QATAR PETROLEUM.

QC Inspector ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Reporting to Lead QC Engineer.
2 Verify attachments of RFI, it's comply with drawings & document revision
3 Field inspection for installation & alignment of Static & Rotary Equipment as per the related standard/documents.
4 Coordinate with client for final inspection.
5 Preparation of all inspection records.
6 Review & verification of all records during the final closure & hand over.

March 1999 ¡V October 2000
Seeyen Engineering Co. Pvt. Ltd. Guwahati Refinery - II, Assam
Supervisor ¡V Static & Rotary Equipment
Duties & Responsibilities
1 Organize & direct the site Installation & alignment activities.
2 Verify the latest revision of Drawings & Documents.
3 Field installation & alignment of Static & Rotary Equipment with respect to the related standard, specifications, ITP & vendor manuals.
4 Conducting daily Safety toolbox talks.
5 Coordinate with Field Engineering to solve any non-conformance.
6 Classroom training & Coordinating on job practical training on precision alignment to an assigned group of technicians.

February 1998 ¡V January 1999
Star Constructions ¡V Mumbai. Jindal Strips Ltd., Mumbai.
Millwright supervisor - Equipment
Duties & Responsibilities
1 nstallation & alignment of Equipment for Skin pass mill, zendzimer mill & auxiliary equipments, Annealing & Pickling Line, Coil Build up line, Coil Galvanizing line etc.
2 Preparation of Relevant documents for Inspection.
3 Coordinating with QC & Field Engineering section.
Training / Seminars
Attended * 1999 - Training in API Recommended practice 686 ¡V 1ST Edition 1996 for Machinery Installation & Installation Design by Hyprecision Hydraulik Pvt. Ltd. (Proj.Div.) Mumbai, India.

* 2000 ¡V Training in Installation, Alignment & Inspection of Horizontal & Vertical pumps, Reciprocating & Centrifugal Compressors by Bharath Pumps & Compressors Ltd., Kanpur, India.

* 2006 ¡V Seminar & Training attended for Incident Investigation & Reporting by JGC ME FZE

* 2007 ¡V Seminar & Training attended for PMI-Arcmet 8000 by SANCO, UAE.

Personal Data Nationality: Indian Province: Kerala
Date of Birth: March 29, 1975 Civil Status: Married
Passport No: F 7768382 Date of Expiry: 30-July-2016

Education 1994-1997 State Board of Technical Education, Kerala, India.
Diploma in Mechanical Engineering (3 years).

1990-1992 M.G. University, Kerala, India. Pre-Graduation course (2 years)

Computer Skill Operating Systems- Windows 2000, XP, and Vista including EDIS, LOTUS NOTES, Documentum 5 and MS Office.

Languages Known English, Hindi, Malayalam, Tamil.

Driving License
LMV ¡V Indian International
NOC for Saudi Available.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1097)

Go to Search Parameters...

Brief Description

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Extensive and progressively responsible hands-on management experience.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Highlight: Thirty-Six Years Continued Experience in the petro-chemical, power generation, mining and commercial industrial sectors, working with several major companies at various levels of responsibility in the procurement/supply/distribution/and management of materials.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To obtain a challenging position that utilizes proven experience and skills.

E&I QC Inspector

Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman

Mechanic/Welder Field, shop, underground

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations

Paramedic with 22 years experience in emergency care , Remote Site Medic certified, ACLS Provider, BLS Instructor, HSE Safety Coordinator, Divemaster/Rescue Diver. Work experience includes managing muti national task force in middle east, and provision of clinical care in south asia remote sites

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.

Project maintenance manager/planner/trainer

Complete Facility Maintenance

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Primavera 6 certified planner

Communicator, negotiator, manager, natural leader

20+ years in culinary field,client pleaser,professional with a sense of humor

IT PROJECT MANAGEMENT

Logistics Manager, Rig Manager, Materials Manager

Manager / Engineer ( HW / SW / QA / Training )

Working on projects for various E&P Companies and Contractors

To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Africa specialist - 25 years Africa experience, 16 years work experience, general management (production, materials, logistics and international transport fields), 14 of which are at managerial level, the last 11 years being spent as an expat in West Africa and West-Central Africa.

Qualifications: S.S.C., Intermediate, NCTVT - Vocational Diploma In Motor Mech, A.M.I.A.E. (India, Auto Engg).

Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word

9 Yrs Experience in Oil & Gas Estimation, Civil Construction, Architectural Facades, Construction Chemicals.

Cad design, cnc machine operation, electrician residential, commercial and power company

Cad Operator

audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.

I am an experienced welder/fitter.

Electrical Eng./Supervisor - Power Plant

MAINTENANCE ENGINEER, GAS TURBINE, FITTER

QA/QC welding isnpetion experience on US & overseas projects. CWI, Level II MT, UT, PT, RT film interpretation

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out