Resume - I work offshore in the Gulf of Mexico contracted by oil and gas companies to mon...

Misco Jobs

Resume #77510

CONTACT INFORMATION:
View contact information...

Current career Details

RPS Energy (Formerly Hydrosearch) July 2006 to Present
350 Glenborough, Suite 200 Houston, TX 77067
Dietrich Landis 281-877-9400
- Performed both Lead MMO and MMO duties to maintain environmental compliance during seismic operations in the Gulf of Mexico
- Submitted bi-monthly reports on mitigation measures to the Minerals Management Service (MMS)
- Observed and recorded information about the ramp up of airguns and the effect on marine mammals located within (500m) to ensure compliance with NTL No. 2007-G02 guidelines
- 70-90 hours per week/ $210 per day

Year Client Location Contractor/Vessel Project
2008 CGGVeritas GOM Veritas Viking I 3D Seismic Survey – Wide Azimuth
Lead Observer
Western Geco GOM WesternGeco 3D Seismic Survey – Wide Azimuth
Toisa Crest Lead Observer
CGGVeritas GOM CGG Laurentian 3D Seismic Survey – Wide Azimuth
2007 British GOM Veritas Osprey 3D Seismic Survey – Wide Azimuth
Petroleum Lead Observer
Western Geco GOM Western Neptune 3D Seismic Survey
2006 British GOM Veritas Vantage 4D Seismic Survey
Petroleum

Previous Career Details

Fugro-GEOS August 2007 to November 2007
6100 HILLCROFT, HOUSTON, TX 77274
JORDAN PAYNE 713-346-3600
- Shipboard operation and shore-side maintenance of Acoustic Doppler Current Profilers (ADCP)
- Deployment and recovery of oceanographic equipment, use of power and hand tools and maintenance of equipment
- Demobilization of vessels
- Working closely with client representatives, Captain and crew of the vessels to provide timely, accurate oceanographic data and support
- 84 hour per week/ $18.00 hour

Year Client Location Contractor/ Vessel Project
2007 British Petroleum GOM Jonathan Chouest Current Monitoring using ADCP
British Petroleum GOM Commander Tide Current Monitoring using ADCP

Saltwater inc June 2005 to April 2006
733 N St, Anchorage, AK 99501
Diana Starr 907-276-3241
- Reported regulatory compliance relating to the Magnuson-Stevens Fisheries Conservation Act, the Marine Mammal Protection Act, the International Pacific Halibut Treaty, the Migratory Birds Treaty, and the Endangered Species Act.
- Completed a three-week certification course with an at-sea safety evaluation which meets the standards of the National Marine Fisheries Service and the United States Coast Guard.
- Working conditions consisted of 1 to 45 days at sea, sampling on open decks (cold and wet weather conditions), rarely sleep for 8 hours uninterrupted, lifting up to 90lbs multiple times a day, and reporting to National Marine Fisheries Service (NMFS) daily. 
- Responsibilities included sampling for species composition; identification and collection of fish, scallops, crabs, marine mammals and seabirds; collection of biological samples; monitoring for marine mammal and protected bird interactions; documentation and reporting of daily fishing activity to the National Marine Fisheries Service.
- 70-90 hours per week/ $133 per day

Year Location Vessel Type of Vessel
2006 Bering Sea American #1 Fishing vessel – Trawl 160ft
2005 Gulf of Alaska Ruff and Reddy Fishing vessel – Pot boat 86ft
Gulf of Alaska Hickory Wind Fishing vessel – Trawl 74ft
Gulf of Alaska Miss Sarah Fishing vessel – Trawl 100ft
Gulf of Alaska Irene H Fishing vessel – Pot boat 96ft
Bering Sea Alaska Warrior Fishing vessel – Trawl 250ft

University of Texas Medical Branch, Dr. Chopra's Lab May 2004 to May 2005
301 University Boulevard, Galveston, TX 77555
Dr Vimlarani Chopra vchopra@utmb.edu
- General maintanence, ordering, and inventory of research lab
- Extraction of cRNA from cell lines HELA, SKOV3 and OVCAR converted into cDNA with the use of Reverse Transcriptase - Polymerase Chain Reaction (RT-PCR) then visualized through Gel Electrophoresis, Polyacrylamide/Agarose.
- Determination of survival rate of Ovarian and Cervical cancer cell lines SKOV3, HELA, and OVCAR was evaluated using the MTT test.
- Evaluate the viability and survivability of SKOV3, HELA, and OVCAR through the technique of Live/Dead Staining.
- Identifying vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF) via Western blot analysis in which these proteins were separated by electrophoresis, transferred to nitrocellulose, and reacted with antibody.
- Appling Reference Manager to organize and utilize bibliographic references.
- 40 hours per week/ $32,000 per year

Volunteer work

Habitat for Horses November 2004 to April 2005
Hitchcock, TX 77563
Rebecca Williams 409-935-0277
- Dispensation of medical and dental care, grooming, diet and general maintance of horses.
- Dealt with Ranchers, farm hands, and sizeable farm equipment.
- 10 hours per week/ Volunteer.

University of Texas Medical Branch, Dr. McBride's Lab September 2003 to April 2004
301 University Boulevard, Galveston, TX 77555
Dr. Kuyler Doyle 409-747-2498
- Identification and localization of specific regions of protein molecules that are recognized by the immune system by the process of Epitope Mapping
- Amplification of DNA through the practice of Polymerase Chain Reaction (PCR)
- 25 hours a week/ Volunteer

Other information

Education
1. Iver C. Ramum, High School Degree. 1999
2. Texas A & M at Galveston, Bachelor of Science, Marine Biology. 2003

Specialty Courses
1. License to go Offshore, BP 6 in 1. British Petroleum. 2007
2. Offshore/TRAP/SafeGulf SafeLand, Fugro-GEOS. 2007
3. Water Survival/ Helicopter Underwater Egress Training (HUET), Acadiana Safety. 2006
4. MMS Marine Mammal Certification. Geocet 2006.
5. Cold Water Survival, National Marine Fisheries Service. 2006
6. Open Water Scuba Certification, PADI. 2002

Reference
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1093)

Go to Search Parameters...

Brief Description

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

Master Mariner and have experience as Senior Officer on LPG Carriers

! have 23 years in the oil and gas industry with the last 10 in the pipeline control room. Handling 10000 miles of pipeline reciepts and deliveries.

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

QAQC Inspector. I have Experience on both LNG Termals and Oil Refineries

I have Masters Degree in Geology with experience in Coal Exploration.

My experience have given me a broad adaptation of works in various areas. I can and will succeed in almost every area of work as I am a practical and fast learner. I have sufficient knowledge in computer basics and literacy. I am a fast typist and can create text documents

This letter is to express my interest in applying for an oil rig job. I have an Irish national craft certificate and over 7 years experience as an electrician. Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up wi

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Draughtsman - Piping / Architectural / Civil. with extensive number of years experience

Instrument Technician with Overseas Russian Experience.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Professional Objective: To continue working as a Quality Assurance, Construction Representative, Pipeline Welding Inspector, Non Destructive Testing Inspector, Radiographic Interpreter, for a major proactive organization.

Mining & construction Equipment, Oil field production, Power generation

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Familiar in Auto cad (2D&3D), Microstation & Ms Office. Strong practical knowledge of Electrical. Good team player with supervisory skill

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

29 Yrs + Contracting within Materials Management & Logistics, Onshore, Offshore & Overseas currently employed upon a consultancy basis by Rolls-Royce having just completed a contract with “NSSE” where I had been their Materials Manager (see CV)

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

Mining underground mucking hauling bolting and screening leading shotcreating and construction

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Man of many trades

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

Quality Control Senior Chemist

My qualification are heavy equipement technician specially on hydraulic system ,trouble shooting,repair modification and commisioning

4 years experinece in electronincs and electrical related works and in embeddeded sytems

17 years Electrical/Instrument experience including full-term 8000 hour apprenticeship with Electrical Trade Certification. Strong International background with involvement in the Power Generation, Petrochemical, Mining, Chemical Recovery and Off-shore Oil and Gas projects.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Would like to personally discuss my qualifications and personal resume in greater detail and look forward to scheduling a personal interview with you in the near future. I have my T.W.I.C. Industrial safety Training. 24 hour Hazwoper/Forklift Certification. Confined Space Training;

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

Planning/Schedule Engineer,Maximo IMplementor,

Scaffolding supervisor, 12 years experience in oil and gas projects, international experience, 200+ staff on last project, teaching to locals experience

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out