Resume - Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha...

Misco Jobs

Resume #77701

CONTACT INFORMATION:
View contact information...

Application for offshore Hydraulic crew post/ Riggers post

I would very much appreciate a chance to work in the offshore oil industry. Although I am a Qualified Hydraulic Specialist I have done an Off Shore Survival Course, and SAMTRAC through NOSA. I would like to enquire as to the possibility of employment as E.H.S. Officer, or, as part of a Hydraulic Crew or ROV Trainee, or any other position your company would suggest, on one of your offshore installations. I am more than willing and prepared to begin at the bottom and work my way up in your organization. As can be seen by my credentials I am a fast and willing learner.

At present I have no offshore experience and am thus very eager to actively participate in any training course(s) you expect me to attend and complete successfully in order to achieve my goal.

In Short:
I am an easygoing type of person and I get along with most people. I can and will work well under pressure alone or as part of a team. I also do not mind working away from home for extended periods of time. I can be trusted to do my work alone, as part of a team or as head of a team without any supervision. I am conscientious and responsible and can take and effectively carry out orders. I am hard working and I am prepared to undergo any drug test and medical examination your company requires. My past work and credentials indicate that I can be an asset to your esteemed company.

My Curriculum Vitae is attached hereto for your perusal, trusting that my qualifications equates to your high standards of employment. Certified true copies of my certificates are available at your request.

Personal Details
Nationality: S.A. Citizen by Birth
Marital Status: Married. (No dependents)
Language Ability: Fully Bilingual
Health: Excellent
Criminal Record: None
Religion: Dutch Reformed Church
Reliable Transport: Motor Vehicle.
Valid licenses: Code A & EC (Prof. Driving Permit: General &
Personnel. Expire 10.06.2009
School: Monument High. Grade 10. 1974

Education & Training Grade 10 & Post School
1. Trade courses and Trade test 02.01.1975 –
27.10.1978: Qualified as Aircraft Fitter
2. Petrols, Oils and Lubricants Quality Control
Completed 29.10.1981
3. Nosa Safety for Supervisors Completed
22.10.1982
4. Nosa Teletuition Safety training Course
1985
5. Senior Technical Course for Non Commissioned Officers 1986
6. Senior Technical Non Commissioned Officers Development Course 1986
7. Quality Management 1986
8. Life Enrichment Course 1988
9. Official Languages Testing Course (Africans & English) 1988
10. Quality Evaluation Course 1990
11. Life Enrichment Course 1990
12. First Aid Course 1991
13. Labour Relations Course for Supervisors 1993
14. Inspection, Preservation and Packaging Course. 1994
15. Aircraft Corrosion Control 1994
16. First Aid Course ?

Decorations and Medals: 1. Propatria Medal
2. Service Medal
3. Long Service Medal Bronze 10 Years
4. Long Service Medal Silver 20 Years
5. Unitas Medal

Commendations: 1. Colours Parade for Freedom of Hopefield
Signed by Mayor Baard 1989.
2. Expression of Thanks by AFB Langebaanweg for Good Service Signed by Col. Labuschagne

Computer Literacy: 1. M.S. Word
2. Excel
3. Internet & Email

Employment History / Job Description:

1. South African Air Force 1975 – 1996.

I. Qualified to work on following Aircraft, Airframe and Engine

Cessna 185 1st Line Servicings.
Kudu 1st and 2nd Line Servicings.
Dakota 1st Line Servicings.
Impala Mk1 Up to and Including 6 Monthly Servicings.
Bosbok 1st and 2nd Line Servicings

Competency for following Tasks on above Aircraft.
a. Marshalling b. Towing and Ground Handling c. Refueling d. Operating of Hobart Starters e. Ground Run f. 1st Line Servicing of Elect. Equip. as fitted to Kudu Aircraft. g. Removal and replacement of Safety Pins on Mk AS 06A Ejection Seats h. Operating and Driving Following Bowsers:
i. Bedford 4x4 4500LT ii. M/Benz 5000LT iii. Man 16000LT iv. M/Benz 26000LT i. Operating and driving Forklifts 3-7 T

Experience Gained in the Following Sections a. Head of Section Flight Line and Flight Line Servicings b. Aircraft Servicing Sections c. Base Aircraft Servicing Section d. Squadron Safety Officer at Air Force Base Langebaanweg for Three Years e. Acting Head of Section for Six Months Air Force Base Hoedspruit Mirage Engine Workshop f. Head of Section Wheel Bay Two Years Air Force Base Hoedspruit.

2. SMC Joint Venture 1997 – 1998
Worked as Hydraulic Fitter on Construction of Saldanha Steel
Assist with Construction of the Continuous Caster Hydraulic Systems including:

a. Hydraulic Pipe work from Hydraulic Room Valve Stands to Ladle Turret, Tundish Turret, Continuous Casting Machine (Segments), Pendulum
Shear, Rollout Table and Dummy Bar.
b. Charging of Hydraulic Accumulators. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. e. Commissioning of Systems
Assist with Construction of Electric Arc Furnace Hydraulic Systems including: a. Hydraulic Pipe Work in Hydraulic Room from Pumps to Valve Stands b. Hydraulic Pipe Work from Valve Stands to Furnace 1 and 2, Roof Lifting Cylinders, Roof Slew Motors, Roof Loosening Cylinders, Roof Elbows, Emergency Hydraulic Panels and Electrode Arm Turret. c. Charging of Hydraulic Accumulators. d. Flushing of Completed Systems. e. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc. f. Commissioning of Systems. Assist with Construction of Ladle Heating Furnace Hydraulic Systems including: a. Hydraulic Pipes in Hydraulic Room from Pumps to Valve Stand b. Hydraulic Pipes from Valve Stand to Roof Lifting Cylinders, Electrode Arm Turret and Slew Motor. c. Flushing of Completed Systems. d. Tracing and Connecting of all Hydraulic Pipes to Cylinders, Motors, Pumps, Valves etc.

All of the above mentioned installations were done by bending 8mm up to 42mm stainless steel and carbon steel hydraulic tubing as well as installing ½" up to 24" stainless steel and carbon steel schedule piping. All pipe work was done with the assistance of coded welders.

My contract at SMC was ended upon the completion of the Steel Making Side of Saldanha Steel. An American Contracting Company – CBI, did the Iron Making Side of Saldanha Steel.

3. Fluid Flow Contracting up to 15 September 2008

Occupation: Hydraulic Specialist / Sales Manager.

a. As Hydraulic Specialist I did the flushing of the pipe work at the Corex at Saldanha Steel in conjunction with Raur Rine Chemicals for CBI b. As Hydraulic Specialist I did repairs on various Hydraulic Pumps, Motors, Cylinders and Valves directly for Fluid Flow Contracting. These were done in the workshop as well as on site. (The main make names dis- tributed by Fluid Flow are Parker, Vickers, Eaton, Charlyn, Bosch and Danfos, and thus I know them very well.)
c. I visited Industrial Sites to look at jobs, determined what spares will be needed, calculated how long it will take to do, considered safety aspects and all special equipment that will be needed to carry out particular installation or repair. d. Assisted with building of Hydraulic Power Packs and test Benches at Fluid Flow Workshop e. Assisted with planning, developing and manufacturing of a new Accumulation System at Pendulum Shear Hydraulic System at Continuous Caster at Saldanha Steel.
f. Worked on Shut Downs and Breakdowns at all hours of day and night. g. Was head of the day shift working on the repair (reinstall all hydraulic, pneumatic, water and grease pipes) at the Saldanha Steel Electric Arc Furnace Shell 1, after a Burn Through. Also lead the night shift repairing all of the same pipes at Saldanha Steel Electric Arc Furnace Shell 2, after a Burn Through.
h. Made up Hydraulic Hoses from single wire to multispiral hoses. i. Was part of the team Installing new Clay Gun and Drill on Furnace 2 at
Namakwa Sands Saldanha j. Designed and assisted in manufacturing of a Portable Tap Floor Drill for the Corex at Saldanha Steel. k. Modified Grease piping, Hydraulic piping and Water piping on Continuous Caster Segments to ensure quicker and easier changing of Segments on Breakouts and standard Maintenance. l. Was part of a 2 man team installing a 3" Pneumatic line complete with Dryer / Heater at Iron Granulation Plant at Saldanha Steel.
m. Designed 3" Refill line for Oil from Total Bulk Area to Continuous Caster Bulk Tank. (+/- 420m). Engineered Installation, Cleaning and Commissioning of line. n. Designed, contracted outside company for manufacturing, and was part of the 2 man team installing the Bin Opening & Closing Mechanism for
Tail end Bins on Mine at Namakwa Sands Brand se Baai.
o. Overall did various large Hydraulic, Pneumatic, Grease and Water Instal- lations at Namakwa Sands Saldanha, Namakwa Sands Brand se Baai, Saldanha Steel, Duferco Steel Processions, Southern Seas Fishing, Marine Products, Oranje Vis and Saldanha Fish Canning Factory. a. As Sales Manager all Incoming and Outgoing Sales were handled by me. I made sure that prices quoted corresponded with prices on delivery notes. I made sure that deliveries to the Stores were done on or before the dates stated on the clients official orders. I worked closely with the Workshop Manager to make sure that delivery notes for completed jobs went out in time to be signed off by the Client. b. I did Field / Site trips to look at jobs, ascertain what spares will be needed, calculated how long job will take to do, considered all safety aspects and special equipment needed to carry out installation or repair. c. Communicated with Clients to ensure that I know exactly what the client wanted done and made suggestions on how to do work in the Fastest, Safest and most Cost Efficient way. d. Also informed New and Existing Clients on what services and products we could provide them. e. Assisted Store Personnel at times when high volume of equipment was received from Suppliers and booked out to Clients. f. Did Quality Control Inspections on items received. Made sure that items were in sealed containers that part numbers, prices and quantities corres- ponded with order placed with Suppliers. g. Did Quality Control Inspections on items being booked out to Clients. All items specially manufactured by the company was to have Job Number stamped on it, must be sealed in a container, and must be accom- panied by a test certificate where applicable, in the correct quantities. h. Did Quality Control Inspections on items being booked out to Clients. All items received from Suppliers and supplied directly to Clients, were checked against the Clients Order to make sure that correct items, quantities and pricing were received. I also made sure that goods such as pumps, motors, valves and cylinders had test certificates supplied by the Main Supplier. Furthermore, I made certain that all threaded parts were protected. i. I followed up on orders and late deliveries and communicated with Client i.c.w. expected arrival date etc. j. Wrote official failure reports to Suppliers if goods supplied did not conform to standard of quality. k. Attended meetings at Distributors to keep up with latest equipment and procedures. l. Where items could not be obtained from local Distributors, I went on the internet to source goods from other Distributors, both in South Africa and Overseas. m. Sent enquiries to various Distributors / Suppliers to obtain the best Prices and Contracts.

Please Note.
1. All certificates and proof of training mentioned in this C.V. is available on interview.
2. Remuneration will be discussed during interview.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1093)

Go to Search Parameters...

Brief Description

Graduate Civil Engineer from a reputed institution of India having experience in Quantity Survey & Contracts in projects across the Gulf, currently working with one of the premier infrastructure companies of the Middle East, seeking suitable long term career opportunities.

20 plus years of experience in all aspects of the electrical field, last 17 in Industrial work.

Maintenance Specialist

To secure a challenging and rewarding career in the Electronic Repair Industry that puts emphasis on increasing responsibilities, personal growth, professional achievement, continued education and a company that offers opportunities for career advancement.

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player. Years of experience in the industry, available for work anywhere, longing to work oversea's, reliable and felxible.

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Diploma mechanical eng.

CA State Certified General Electrician(Journeyman) with some Instrumentation training in Process Controls

Construction Superintendent

Construction Laborer Expert 0-2 years Customer Service Face-to-Face Support Expert 10+ years Engineering Applications / Technical Support Strong 5-10 years Engineering Electrical Strong 5-10 years Engineering Field Service Expert 10+ years Engineering Maintenance Expert 5-10 years

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

I am a multi field Estimator, Designer and Project manager, Electrical and Mechanical is my best fields, working knowledge of structural steel, concrete, IT and plumbing. I have designed and installed Power Distribution and generator systems. Safety and code compliance is a must.

I have 20+ years as a Welder. I have numerous certifications in Welding Procedures. I am willing to relocate and/or travel.

Moving to Georgia Thomaston Area need work.. by 4/01/04

Crane Operator

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

I can offer extensive supervisory experience in the oil and gas industry,

30 years experience in all types of heavy industry,the equipment used,predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects,overseen and implimented safety, inspection.

Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field. Skilled in all types of mechanical work- hydraulic, pneumatic, conveying systems

I am looking for a full time work, anywhere

Experienced electrician looking for full time employment.

Results oriented computer technician. Background includes seven years of experience in installation, testing, upgrading, configuration, troubleshooting, support, and maintenance of LANs, WAPs, and applications software and hardware devices.

Challenging and rewarding position in growth-oriented organization which offers diverse job responsibilities in vehicle maintenance and will fully utilize both my technical and managerial abilities.

4 years experience in Quantity Surveying, also exposed in construction management works.

Safe Operation of Cranes to 300 Tons

Below is my resume, it will show that I have worked in the United States as a pipefitter for over 20 years. I am interested in working overseas on a job in-which my wife can accompany me.

Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient.

21 years in construction

Multi-skilled Individual seeking long term employment with company that has stability, and is committed to caring for its employees.

Electrician

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Safety Officer, Mechenical / Electrical, 10 years exp

Project Manager/ Superitendent/Estimator

construction laborer/ operator -10 years experience- very dependable

Servicing and Repairing Electrical and Electronic Equipments. I have a Diploma in Electrical Engineering, a New Zealand Trade Certificate in Electrical Theory and Practice, and a New Zealand Registered Practicing Licence

Interested in Construction jobs.

Unlimited Welding Cert-(SMAW)/ 1/2" Dual Shield wire cert/ Pattern Layout/Parallel development

Excavator, Showell, Dozzer etc. heavy machinery operator with 15 years of experience worked in India, Iraq, Kuwait, Dubai, Saudi-Arabia and Oman.

Advanced air diver, subsea construction, wet welding, all aspects of construction, top notch employee.

Masters degree in Management, 22years heavy construction

Welder Fabricator/Plumber/Carpenter/Painting/NDT.None Destractive Testing

Construction manager /Foreman/carpentry background/Marine experiance

Superintendent Supervisor Manager

4 years hand on working in Pipe Manufacturing Plant Offshore and Water Injection Pump related to a medium and large engineering and construction project with client and engineering contractors. Extensive experience in Civil Work, Quality Control Inspection and operating computerized Document Control

Site safety inspection • Driving • Basic Investigation • Knowledge in Basic programming such as C++ and Visual basic and manipulating software in designing such as adobe photoshop and macromedia flash • Basic knowledge in PC troubleshooting • Can communicate with all types of people • Mange to wor

Electrical foreman, superintendent, master electrician. Very familiar with NEC

Industrial Journeyman Electrician-28 years

Steward, Strong Organized Working Foreman, CNC Operator / Programmer, Fitter/Welder, Iron Worker, Millwright, Shop Machinery Operator, Material Handler / Inventory Auditor, Maintenance / Repair Technician, Entry Level CAD Draftsman Computer Tech, Network Administrator

MicroStation 3D Modeler

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out