Resume - Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC ac...

Misco Jobs

Resume #78983

CONTACT INFORMATION:
View contact information...

Employment

16/06/2008 – Present Granite International (GSI), Central Europe

I am currently hired via GSI and utilised on various GE owned businesses, predominantly Aero. I am presently assigned to Installation & Commissioning on-site training of GE's LM6000 packages with the prospect of becoming a TA for GE installations worldwide. I previously spent 6 months in GE Energy service workshops based in Rheden, The Netherlands. Though relatively new to working with the internal components I gained knowledge and experience whilst applying my skills working on all aspects of their LM6000 Gas Turbines. From time to time I also assist GE Water Technologies on their mobile water treatment purification trailers as an Operations & Maintenance Technician. As an experienced tradesman and Gas Turbine operator, I am considered for contracts with GE Energy Rentals to further provide skilled labor on both Engine Maintenance Support, and Operations & Maintenance of their TM2500 Mobile Power Plant.

01/04/2008 – 10/05/2008 NRG Global, Pakistan

Working self employed I was utilised in planned maintenance of seven General Electric LM2500 Gas Generators. Having previous experience of the site and equipment on the original installation and the operations, I was approached to assist Aero representatives in carrying out removal of engine, top casing and blade changes, as well as hot sections and nozzle changes. In between maintenance periods I was also required as an Operations and Maintenance Technician to ease pressure from longer term site staff.

13/09/2007 – 31/03/2008 Granite International (GSI), Central Europe

I was recruited predominantly to work alongside GE Aero Derivatives on European contracts. I have assisted Aero in the removal of engines (and in cases the Power Turbine) from the package for major overhaul. Re-installation & alignment, and pre commissioning of land mounted units, generally LM2500. Having an appreciation and experience of Operations and Maintenance of their TM2500 power plant as a package for GE Energy Rentals, I gained further experience solely on the LM2500 Gas Generator itself. Working to GE guidelines and procedures, fulfilling Aero FSR expectations, I now have a greater understanding of Engines and the strict mechanical work required, particularly on installs.

To become more flexible for Granite I accepted a request to attend classroom training for GE Water Technologies. I then worked on operations and maintenance within Europe on GE Mobile Water Treatment plants, providing various levels of purified water to suit client specification based upon plant requirements. I have gained further knowledge of chemistry and the direct use in water treatment. I have obtained operations and maintenance experience of mobile plant including 6 stage Filtration Systems, Reverse Osmosis, De-Aerators and DI Trailers and their effectiveness and efficiency within the water purification and treatment industry.

08/06/2007 – 03/08/2007 NRG Global, Kuwait

Installation Supervisor: Working Self Employed as PB Globetech Ltd, however sub-contracted to TC Power via NRG Global on a rotating shift basis. Working as a team member my role is to oversee and assist in a new installation of six General Electric LM6000 gas turbine units. Responsibilities include liaising with client on a daily basis regarding progress, safety concerns if applicable and relevant issues. Accountable to Project and Installation Managers I am supervising a team of ex-patriots, and local labor of up to 20 personnel.
Additionally
* Responsible for install progress and updates
* Responsible for implementing health and safety measures
* Ensuring all mechanical lift machinery are operational and available
* Progression of installation and commissioning movements
* Identification and rectification of problems

08/12/2006 – 27/05/2007 NRG Global, Pakistan

Mechanical Technician/Turbine Operator: Working Self Employed however subcontracted to General Electric Energy Rentals via NRG Global I was part of a team responsible for the installation, operation and maintenance of seven TM2500 mobile gas generators utilised on a WAPDA Power Station in Pakistan.
Additionally:
* Self motivated mechanical technician and turbine operator
* Key team member within specialist install team
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Condition monitoring of package machinery
* Contribution towards operator training of local personnel and ex patriots
* Familiar with relative local and remote HMI computer operations software
* Team empowerment and inspiration. Also able to contribute greatly on own initiative

28/04/2006 – 01/12/2006 NRG Global, South Africa

Mechanical Lead/Turbine Operator: Operating via NRG Global I was subcontracted to General Electric Energy Rentals for a period of seven months. I was responsible for the installation, operation and de-mobilisation of three TM2500 mobile gas generators based on a PetroSA Oil Refinery.
Additionally:
* Contribution towards achieving install deadlines as a key member
* Shaft alignment technician utilising Pruftechnik Rotalign Pro
* Ensured effective maintenance of relative machinery
* Ensured client dispatch requirements were fulfilled
* Maintaining a very good client relationship
* Appointed leading mechanical hand relative to de-mobilisation
* Achieved record de-mobilisation target, whilst ensuring health and safety requirements were the optimum goal throughout

01/09/2004 – 23/02/2006 IPM Industries, Thornaby

Service Engineer: Employed on a permanent basis to overhaul client pumping equipment, whether on site or in the IPM workshops. When necessary I was also subcontracted out to local and national refineries, steelmakers and chemical industries. I was also utilised overseas installing and demobilising mobile power generation equipment for General Electric.
Additionally:
* Rotating equipment specialist
* Competent in maintaining heavy plant machinery and equipment
* Rotalign Pro laser alignment technician
* Maintaining good client relationship via personal conduct
* Health and safety awareness

02/04/2001 – 27/08/2004 Ceetak Engineering Ltd, Middlesbrough

Service Engineer: Employed on a permanent basis to overhaul a wide range of client pumping apparatus and rotating equipment both on site and workshop based. Responsibilities included quotations, recommendations and sourcing of spares and replacement units. Within this role I was required to assist the workshop manager and area sales engineer by taking on some of their duties on a regular basis.
Additionally:
* Rotating equipment specialist
* Optiline laser alignment technician
* Administration
* Knowledge of working in petrochemical, chemical, oil & gas and pharmaceutical industries
* Health and safety awareness o
* Management of workshop and stores

16/11/1998 – 30/03/2001 SLD Pumps Ltd, Chester le Street

Diesel Pump Fitter: Employed on a permanent basis to overhaul a range of diesel and electric driven Godwin self priming pump sets within the company fleet. Based in the central repair centre I was responsible for the repair/overhaul for a range of diesel engines, self priming pumps, compressors and vacuum pumps, as well as rectifying any chassis damage. All serviced pump sets were performance tested in house prior to release from the centre.
Additionally:
* Rotating equipment specialist
* Manufacture of 12/24v engine wiring looms
* Knowledge of Volvo, Cummings, Perkins, Ford and Lister-Petter diesel engines
* Manufacture of brackets and steelwork
* Occasional management of stores and stock levels
* Compliance with company and OEM standards

16/06/1992 – 13/11/1998 Clydesdale Forge Co, Hartlepool

Mechanical Technician: I was initially recruited as an apprentice on a permanent basis, and retained as a fully qualified Technician following completion of my apprenticeship. Responsible for repairs and maintenance of all company machinery, and ensuring all plant equipment was kept in good operating condition. I was selected to be part of a product improvement team for my mechanical input and system modification suggestions. I also set up a PC controlled routine maintenance schedule to aid prolonging component life and reducing machine downtimes.
Additionally:
* Knowledge and competency in maintaining a range of forging and stamping machinery
* Control of PC assisted routine maintenance
* Knowledge of pumps & valves, hydraulics & pneumatic systems, brake & clutch systems, cams and followers
* Enthusiastic team player

Skills

* Capable, competent, reliable and responsible
* Ability to work on own initiative or as a team member
* Methodical and able to apply fault finding techniques
* Very good communication and administration skills
* Trained alignment technician
* Computer literate
* Welding and fabrication
* Basic electrical skills
* Basic lathe skills

Education

1987 – 1992 The English Martyrs Comprehensive School, Hartlepool
(GCSE'S) Mathematics, Modular Science, Art and Design, Graphic Design, English Language,
English Literature, History, French, Religious Studies
1992 – 1993 Stockton & Billingham Technical College, Stockton
BTEC First Certificate in Engineering
1993 – 1995 Hartlepool College of Further Education, Hartlepool
BTEC National Certificate in Mechanical & Production Engineering
1995 – 1997 Hartlepool College of Further Education, Hartlepool
BTEC Higher National Certificate in Mechanical & Production Engineering

Training Courses

Jun 1993 Entra (Engineering Training Authority)
NVQ Level 1 & 2 Mechanical Maintenance Skills
Jan 1996 Clydesdale Forge Engineering Company
Slinging and Pendant Controlled Overhead Crane Driving
Oct 1996 Entra (Engineering Training Authority)
NVQ Level 3 Engineering Maintenance - Mechanical
Oct 1999 SLD Pumps Limited
Counterbalance Fork Lift Truck Operator Certificate
Sep 2001 Ceetak Engineering Limited
Glandless Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Centrifugal Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Vacuum Pump Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Progressive Cavity & Positive Displacement Maintenance Competency Certificate
Sep 2001 Ceetak Engineering Limited
Mechanical Seal Maintenance Competency Training
Jun 2002 Pruftechnik AG
Optiline Laser Alignment Training (Uncertified)
July 2002 AES Seal Plc
Mechanical Seal & Systems Training Course
Sep 2002 AES Seal Plc
AES Seal Correspondence Course – Bronze Award
Jun 2003 Pruftecknik AG
Vibrotech Condition Monitoring Training (Uncertified)
Sep 2004 IPM Industries – In House
Rotalign Pro Laser Alignment Training (Uncertified)
Jun 2006 General Electric – Non certificated EHS Training in accordance with GE policy (NRG)
May 2007 NRG Global – In House
Rotalign Ultra Laser Alignment Training (Uncertified)
Sep 2007 General Electric – Non certificated EHS Training in accordance with GE policy (GSI)
Nov 2007 General Electric – Non certificated mobile flow school, GE Water (GSI)

Hobbies

* Motorbikes
* Travel
* Cycling
* Running

References

* Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 1097)

Go to Search Parameters...

Brief Description

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Extensive and progressively responsible hands-on management experience.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Highlight: Thirty-Six Years Continued Experience in the petro-chemical, power generation, mining and commercial industrial sectors, working with several major companies at various levels of responsibility in the procurement/supply/distribution/and management of materials.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To obtain a challenging position that utilizes proven experience and skills.

E&I QC Inspector

Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman

Mechanic/Welder Field, shop, underground

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

For the past 11 (Eleven) years of my working experience as Equipment Site Supervisor/ QC Inspector/QC Supervisor, I had gained experience & Knowledge on Quality Awareness. Performing Hold, Witness & Surveillance inspections based on standard requirements and other related presentations

Paramedic with 22 years experience in emergency care , Remote Site Medic certified, ACLS Provider, BLS Instructor, HSE Safety Coordinator, Divemaster/Rescue Diver. Work experience includes managing muti national task force in middle east, and provision of clinical care in south asia remote sites

I am a target oriented person with vast experience in Oil and Gas Construction Projects, I have experience in the safe Erection, Dismantling and Modifications of all Scaffolds in accordance with BS 5973 Standards, Inspection of scaffold materials and fall protection systems, documentation of scaffol

A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.

Project maintenance manager/planner/trainer

Complete Facility Maintenance

I am working as an instrument technician in KSA through Al-Hugayet contracting Est. since January 2000. My job includes Installation, commissioning and Maintaining Process Control Instrumentation, associated with Oil, Petrochemical, Polymer, Packaging Lines with 10 years Experience.

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Primavera 6 certified planner

Communicator, negotiator, manager, natural leader

20+ years in culinary field,client pleaser,professional with a sense of humor

IT PROJECT MANAGEMENT

Logistics Manager, Rig Manager, Materials Manager

Manager / Engineer ( HW / SW / QA / Training )

Working on projects for various E&P Companies and Contractors

To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Africa specialist - 25 years Africa experience, 16 years work experience, general management (production, materials, logistics and international transport fields), 14 of which are at managerial level, the last 11 years being spent as an expat in West Africa and West-Central Africa.

Qualifications: S.S.C., Intermediate, NCTVT - Vocational Diploma In Motor Mech, A.M.I.A.E. (India, Auto Engg).

Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word

9 Yrs Experience in Oil & Gas Estimation, Civil Construction, Architectural Facades, Construction Chemicals.

Cad design, cnc machine operation, electrician residential, commercial and power company

Cad Operator

audits – compiling safety meeting data – safety meeting presentation – worker’s Three (3) years experience in Safety – accident/incident reports – safety compensation – drafting Emergency and Fire Prevention plans – OSHA regulations and logs Three (3) years experience in Purchasing/Warehousing.

I am an experienced welder/fitter.

Electrical Eng./Supervisor - Power Plant

MAINTENANCE ENGINEER, GAS TURBINE, FITTER

QA/QC welding isnpetion experience on US & overseas projects. CWI, Level II MT, UT, PT, RT film interpretation

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

I'm mechanical engineer specialized in hydraulic and pneumatic installations, with a large experience in design, maintenance, reparation for this equipments in various industry(civil, constructions, marine, production)

Experience of GE LM2500 & LM6000 Installations and GT's. Educated to BTEC HNC academic, and GNVQ 3 Trade Certs. I have installation & Commissioning of both LM2500 LM6000 packages and Operations & Maintenance of GE's trailer mounted LM2500 Gas Turbine.

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out