Resume - As a skilled excavator operator in most fields presently holding CPCS operators ...

Misco Jobs

Resume #79701

CONTACT INFORMATION:
View contact information...

PLANT DRIVER / OPERATOR

EXPERIENCE:
CPCS Card ID 01004265/1 NVQ Level
* EUSR Card ID 46585 Expires 2009
* Cross Country Pipelines Health & Safety Passport
* General Health & Safety training.
* Skilled in operating the following:
* Articulated Dump Truck all sizes
* 360 Excavator all sizes
* 180 Excavator all sizes
* Dozers (Limited Experience)

* Experience in the safe loading and unloading of construction materials.
* Temporary site Manager for 2 short term construction projects. Responsible for operators' time sheets, updating site records and daily liaising with client.

EMPLOYMENT: Walters UK,/ Minning South Wales UK Sept 2006/Present
360 Excavator Operator 20 – 90 tonnes

* Civil Engineering Works: J2 – M25/A2 Improvements (Joint venture Costain)
* Civil Engineering Works: A34 Wolvercote Via duct replacement (Client Costain)
* Civil Engineering Works New A354 Relief Road Weymouth Dorset (Client Skanska )

Jones Bros Ruthin Ltd, North Wales May 2001/ August 2006
360 Excavator Operator 13 - 75 tonnes
/ Dump Truck/ Dozers

* Prepared old harbour for new mariner: Deganwy Mariner North Wales, which included placing rock armour.
* Site managed / operated 360. Quarry overburdened strip. Macclesfield ( Client Hansons minerals)
* Building new quarry haul roads, excavating blue slate for aggregate market and green slate for landscaping market. Caernarfon (Client McAlpine Quarries)
* Site managed / operated 360. Loading mining spoil for capping landfill and engineering batters for new landfill. Chesterfield (Client Viola)

Outback Staff Agency Australia. Nov 2000 / Feb 2001
Agricultural and Construction Machine Operator

* Worked in various places through New South Wales.

.

EDUCATION: Holywell High School 1972 / 1977

Left with qualifications to CSE standard.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1097)

Go to Search Parameters...

Brief Description

Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.

I am a qualifies Inter provincial (red Seal) Industrial Mechanic (millwright), as well as a Interprovincial (red seal) welder certificate, with a all psition SMAW CWB and a 2 position GMAW CWB ticket.

Technical Project Manager

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

As you will see from the enclosed details I am a qualified and highly experienced hands-on Corrosion, Coating and Insulation Professional with + 20 years extensive onshore and offshore experience within the construction, oil & gas and petrochemical industries in both the Netherlands and abroad.

my jobs

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

I am Professional Logistician (CITT), Certified Purchaser, Journeyman H/D-Parts Technician and Warehouseman. I live and work in Fort McMurray (Warehouse Supervisor for Nexen Canada at Long Lake Project ($21 million inventory) -20 years of combined material distr.experience

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

over 11 years of heavy equipment operation experience in multiple industries.

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Workshop / Fleet manager over 20 years experience

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

Basic operational skills of the track hoe including safety procedures. Use of the engineer's level. Measurement of cross slope embankment and trench grade line using steel tape and level. Reading and understanding blueprints. Additional training on the backhoe and bulldozer.

Maintenance, water purification, reverse osmosis, materials, logistics, management

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

Welder or Welder Supervisor

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

I am a heavy equipment specialist. I repair all types of earthmoving equipment. My strong suit is welding and fabrication.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

Experienced Design Engineer

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

I desire a position as manager or associate manager to help grow and expand the company. My experiences so far include the former establishment of a home based import/export business with experiences in cultural behavior and product negotiations with foreign companies.

Channel sales, Institutional sales, Oem sales, Business development, International sales

Software Developer .NET, Java SQL

Crane operator and Driver

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Contracts Manager

Process Plant Manager, Metallurgical Management, Production Manager, Chief Sorter and Certified Flow-Sort X-Ray Machine operator.

Project control engineer with experience in planning and cost engineerig fields.

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out