Resume - My capabilities have been achieved through many experiences which include traini...

Misco Jobs

Resume #80378

CONTACT INFORMATION:
View contact information...

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
The support includes the use Microsoft and CAD software. My experience spans the use of excel functions, such as logic equations and tools such as data links, assisting in the migration of data to and from CAD, reducing the need of redundant data entry.
A primary objective has been to focus on the improvement of productivity. By stream lining the design process; understanding local & regional jurisdictional standards and UBC codes. By using specific tools; road sections can be created, specific singular modifications can be made, benches at right of ways can be extended, cut/fill slopes modified,… as break lines are imported defining centerlines, flow lines, curbs and daylight boundaries. Subsequently; in highway design, drainage problems are identified, super-elevated curves are manipulated as speed changes effect site distances and in residential design, pad elevations projected. A 3D model is created,… rendered. With minimal effort you now can then provide volume calculations, quantity takes-offs and area tables using CAD tools and VBA/lisps.
My recent experience has allowed me to model in excess of 80 existing pipelines (tile drains); created within 5 pipe networks. In addition, proposed sewer, water and storm drain networks. The model included multiple surfaces; existing ground, multiple proposed rough and finish grade surfaces derived from a tentative tract map of a master planned community encompassed by of 3 major arterials. As well as the natural water level since the project was located at a negative surface level. The key purpose was to show the impact each existing pipeline had on the proposed and how each surface impacted each other. By cutting sections across model we were able to identify the multiple impacts, enabling us to alter specific pipelines, utilities and roadways as needed.
My experience includes many public works projects, from sewer and water extensions, to roadway widening, culvert crossings along with miles of overlay. I have assisting in the process identifying cost savings by eliminating excessive removals with the use of survey data verse proposed designs. This was achieved by manipulating roadway designs, adjusting site distances and other vertical design criteria.
Additionally, I am familiar with military environment and I have over ten years of experience working in the compressed gas industry; including the design, installation and maintenance of automated control systems for piping, storage vessels, cryogenic pumps, and vaporizers. Including the use of analytical hardware and processes used to maintain component purity.

In this brief summary, my objective has been to give you a small explanation of how my level of experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

OBJECTIVE

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.
My objective has been to give you a small explanation of how my experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

EXPERIENCE

2008- Present Sr. Cad Technician
Engineering Consulting Services, Inc. Lexington, KY

Responsible for the design and creation of surface mining maps for permitting the extraction of geologic coal seams. Using design methods and Cad standards as defined by the state standards and other specific requirements defined.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for initiating in house design standards and continuing advancements towards bringing the latest Cad technologies on line and in use. Lead and coordinate user as advancements are established.
Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2005- 2008 Project Engineer \ Sr. Designer
K & A Engineering, Corona, CA

Responsible for the design and creation of TTM's, on through the production of rough grading, street, sewer and water…etc. Using design methods and standards as defined by jurisdictional standards and other specific requirements defined. Responsible for the direct transition into production as a final design is approved.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for coordinating design teams, ensure smooth, correct and timely production of workload.
Responsible for continuing advancements towards bringing Civil 3d (2008) on line in our office. Lead and coordinate user lunch and learning events, coordinate training on site or off site. Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication from clients.
Responsible for communication and coordination to maintain client relationships.
Responsible for billings and budgets.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2000- 2005 Designer / Project Engineer
Nolte Associates, Corona, CA

Responsible for training, Cadd support, project file structures and design standards for Corona office.
Design and processing of subdivision and public roadway projects.
Responsible for keeping projects within budget.
Responsible for dealing directly clients.
In charge of maintaining the CSUF Master Plan. Working directly with CSUF engineering department. Point of contact for all new projects for ongoing CSUF expansions. (Projects to date; Parking structure I, & II, College blvd. realignment and the addition of the new Law college expansion)

1997-2000 Computer Design/Engineer, Partner
Gas Technology Systems, LLC

Designed, programmed, built and installed Automated Compressed Gas filling & Analytical (data acquisition) systems into regional Gas plants.
Gas Systems automated the complete process from the Storage vessels, the cryogenic pumps, vaporizers, to the single cylinder filling manifolds to pallet filling of air gases (Ar, N2, O2) and other components (CO2, He & H2) to mixtures.

Analytical System also automated the process of analyzing the components validating the specific specifications for different products (industrial, food, high purity and medical grades). The automated process controlled trace oxygen, moisture, hydrocarbon analyzers measuring specific components to part per million levels. The system controlled gas chromatographs with differing columns to quantify percent of ingredients.
Create customized software allowing single point selection of component, or mixture from a customized database.
Created new programs to facilitate the processing DOT requirements for Medical Gases.
Provided 24/7 support, including onsite training for end users and
Administrators.
Linked filling process to second party tracking software.

1993 - 1997 Computer Design/Engineer, Owner
MJK Analytical Systems

Designed, programmed, built and installed Automated Compressed Gas filling systems.
Automated the process of pumping cryogenic (liquid) air gases (Ar, N2, O2) and other mixing components (CO2, He & H2) using high pressure cryogenic pumps, ambient and high temperature vaporizer to fill high pressure cylinders. The process used pressure vs. temperature and/or weight to measure the appropriate volumes.
Create software allowing single point selection of component, or mixture from a customized database.
Created programs to facilitate the processing DOT requirements for Medical
Gases.
Provided one-on-one onsite training for users and administrators.

1990 - 1993 Technician
Air Liquide, Inc
Santa Fe Springs Ca & Walnut Creek, Ca

Responsible for maintaining plant processes.
Responsible for designing and installing new processed upgrading existing plant design.
Investigated existing plant production for funding of production enhancements.
Responsible for training, production crew for OSA requirements, basic operation and plant updates.
Worked globally with Air Liquide headquarters USA, Canada & France, enhancing and developing worldwide production methods.

EDUCATION

1980 - 1983 USMC, Paris Island, SC Combat Engineer
Camp Lejuene, NC Journeymen (Engineer Training)
Camp Pendleton, CA Demolitions (Combat Engineering)

1983-1985 University New Hampshire, Industrial Electronics
Associates in industrial Electronics
Durham, N.H.

1986 Beta Technical Institute
Computer Added Drafting Technologies,
Bellflower, CA

2003-2005
2008 Fall Mount San Jacinto Community College,
Continuing my pursuing for an EIT
Menifee, CA

Ongoing Courses in AutoCAD, Land Development Desktop, Civil 3D, 2006, 2008
Carlson, Civil
Microstation, Inroads
Microsoft: Word, Excel, Access, PowerPoint

*Private & Public Project Experience and Referrals upon request.

SKILLS

Software AutoCAD, Land Development Desktop, Civil 3D, thru- 2008
Carlson, MapCad, Microstation, Terramodel
Haestad Methods; Storm CAD - Storm & sewer Systems
Microsoft: Word, Excel, Access, PowerPoint

Areas of Design Commercial, mapping, grading, drainage, engineered waste management plans Land Development, residential tracts, grading and earthwork,
Mapping, Final maps, Tentative Tract Maps, Permitting
Public works, utility extensions, roadway widening, rehab/overlays
Road design, widening, striping, rehab/overlays
Utilities; sewer & water, storm Drain.

During the time I worked with Engineering services I used core samples to identify coal seams within 4 adjacent permits. With client input the specific mining types were identified by seam. Using aerial topography a collective 3d model was built. Using contour, area or augur mining, an undercut surface was built projecting from down from upper most seam with defined slopes and benches. With the subsurface built a post surface is projected from the lowest seam matching the preexisting terrain unless added criteria were defined. Volumes were the extrapolated for spoils, reclamation and coal for each permit.
When I began with K & A Engineering I assisted in providing initial engineering services preparing lot studies, land use plans, utility layouts and tentative tracts maps, in addition to providing mapping. I lead the generation of a continuously evolving 3d surface with infrastructure for eight of twelve concurrent tentative tract maps for the Boulder Springs project.
Once final engineering was underway, I assisted in the prepared Rough Grading Plans, Street improvement Plans, Sewer and Water Improvement Plans. These plans included off site Sewer Lift Stations, 8,000 feet of off site sewer main with 5,000 feet being a force main.
Once Final engineering was underway on the Boulder Springs South project I began working on as the project engineer. This project was similar, starting with 334 lots on the tentative map. This project was intricate because the project was split by a 300' wide water course being crossed by a 6 lane arterial. The crossing requiring three 40' by 9' arch culverts. Additionally in order to provide secondary access to the second half of the project it was necessary to run an arterial to the nearest primary county route three miles away. This added a lot of coordination since the undeveloped land had existing tentative tract maps owned by multiple developers.
Working with Nolte Associates I worked on Canyon Heights which is a 400-lot subdivision rated as rural mountainous, which has slopes of 25% or greater. Beside the normal challenges, it was necessary to make drastic changes to the adjacent primary access road after new county ordinances upgraded its speed and capacity. In turn it became necessary to minimize right of ways, super elevated the cross-section to met speed requirements and enable site distance requirements to be met.
The project design included: constructing a grass-lined, trapezoidal, channel section in an existing unnamed stream bed; the construction of drop structures; a rip rap revetment to protect proposed homes; off-channel water quality basins and an existing, "in-channel", 65-acre-ft, detention basin.
Another stimulating project was for the City of Poway making improvements to Poway road (one mile). The project included the widening, the construction of landscaped center medians, pavement rehabilitation, restriping for increased street capacity and the reconstruction of an adjacent earth channel. Additionally, as part of the widening, the expansion of & addition of a box culvert, doubling the capacity was necessary.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1094)

Go to Search Parameters...

Brief Description

Operations Manager for Geological firm in drilling department. Organize jobs,order supplies,all banking,screening personale,training locals,public relaitons,senior diamond driller.

Unlicensed Engineer, Diesel Mechanic

Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3

Maintenance, HVAC, MAnagement and Supervision, Safety

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Fitter Including Machining and Diesel Fitting

Offering over 10 years of full and comprehensive experience in instrumentation works that includes Installation,Calibration,Loop Checking and Functional Checking, Pre-Commissioning, Commissioning Activities, Trouble Shooting and Repair. Maintenance works in

Operating front-end loaders & dozers in the waste industry

Offshore Advanced Rigger,experianced,heavy lift,200t capt,AB seaman

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.

NACE Level II Certified Coating Inspector, Certified Welding inspector

Free! Industrial construction electrician with two years maintenance in open pit mine

I graduated from Associated Training services for Heavy Equipment Operator .N.C.C.E.R Certification on a variety of excavating equipment .I have a Class A CDL with Tanker Endorsement.I am a hard dedicated worker and a fast learner..

Remote Paramedic, Firefighter, Paramedic

nvq level 3 in electrical installations, 17 th edition wiring regs, hv terminationsand splicing, supervisor experience

D.A.E. (Mechanical) 1970/3300 Second 1989

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

I am a Graduate in Mechanical Engineering with four years experinece in the field of Oil and Gas. Iam also a certified CWI by AWS and also got certification as Level-II in RT,UT,PT,MT.

Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate

I am an experienced HSE Professional knowledgeable with program-procedure development and implementation, accident-incident prevention and investigation, root cause analysis, supervision, contractor compliance, security programs, medical programs, health and food programs, environmental programs

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

MINING/TUNNELING/MECHANIC

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

Manager, Team leader, Computerized production management, International import-export, letters of credit, banking, assistant

To obtain a suitable position in pursuance of promising career where I can make use of skills and experience for the growth of the organization, in conjunction with recognition and encouragement for hard work and sincerity.

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Admisnistrador de sistemas, Systems Administrator, Ingeniero de Sistemas, Systems Engineer, Ingeniero de Software, Software Engineer, Ingeniero Telecomunicaciones, Telecommunications Engineer, Project Manager

My skills are in construction, fabrication, maintanence and electrical HV fitting. I have CN, LF and WP tickets. First aid cert.

HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp

A skilled and dedicated Administrative Assistant with more than 15 years’ experience in the oil & gas industry; coordinating, planning and supporting daily operational and administrative function. Able to provide comprehensive support for senior and middle management.

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.

Crane/Rigging Trainer, Crane/ Lifting Equipment Inspector, Safety Advisor, Crane/ Maintenance Engineer, Rigging Supervisor, Terminal Supervisor

Instrument and Electrical Technician/System Integrator with over 10 years of experience in Control Systems, MS SQL and Microsoft Office. Proficient in troubleshooting VFD’s, Process Control, HMI design, construction and troubleshooting of industrial servers and workstations/communications.

Dual Post Graduate Mechanical Engineer with 10 years of experience

Experienced Offshore Plater - Coded Welder. Norwegian Survival Certificate, European Survival Certificate, Mexican Work Visa

In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.

Mechanical Engineer with 4+ years of experince in construction of power and oil & gas sector

Perform other work as required. Excellent team worker, function well under pressure, highly motivated toward goal achievement, self motivated, eager to learn, honest and hardworking.

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor

Over 16 years of installation and troubleshooting experience within the instrumentation field in various chemical plants. Also have four years of process chemical operating, troubleshooting, and making recommendations for plant safety, quality and quantity of plant production.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out