Resume - to obtaian a job

Misco Jobs

Resume #81084

CONTACT INFORMATION:
View contact information...

Objective

To obtain a job with your company
Work History
Crane Field Technician
Konecranes Inc, Tulsa, OK 2008 - Present
Maintain cranes at customer facilities, pm's cranes and installs of new cranes. Disassemble machinery and equipment to remove parts and make repairs. Repair and replace broken or malfunctioning components of machinery and equipment. Repair and maintain the operating condition of industrial production and processing machinery and equipment. Examine parts for defects such as breakage and excessive wear. Reassemble equipment after completion of inspections, testing, or repairs. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. Operate newly repaired machinery and equipment to verify the adequacy of repairs. Clean, lubricate, and adjust parts, equipment, and machinery. Analyze test results, machine error messages, and information obtained from operators in order to diagnose equipment problems. Record repairs and maintenance performed. Study blueprints and manufacturers' manuals to determine correct installation and operation of machinery. Record parts and materials used, and order or requisition new parts and materials as necessary. Cut and weld metal to repair broken metal parts, fabricate new parts, and assemble new equipment. Demonstrate equipment functions and features to machine operators. Enter codes and instructions to program computer-controlled machinery.

Maintenance Technician
Underwood Truck Repair, Pryor, OK 2006 - 2007
Adjusts working parts, such as fan belt tension, voltage output, contacts and springs, using hand tools, and verifies corrections, using gauges.
Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.

Platoon SGT
Thunderbird Youth Academy, Pryor, OK 2004 - 2006
Supervise Cadets attending the thunderbird training program. Supervise 25
male cadets and 6 female cadets. I followed the Bravo SOP and work well with other cadre on my shift and all other shifts, I report to the Shift supervisor and enforce the rules and regulations and keep total control at all times.

Maintenance Electrical Journeyman
Orchids paper products, Pryor, OK 2001 - 2004
Maintain winders, wrappers. Motor controls, Variable speed Drives, Voltage 460 &
below, set up machines, maintain electrical services for all equipment.
Installation of new equipment and maintain it. Adjusts working parts. Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic.

Heavy Machinery Mechanic
Oklahoma army national guard, Pryor, OK 1992 - 2001
Maintain military equipment and vehicles. Adjusts working parts, such as fan belt tension, using hand tools, and verifies corrections, Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.
Disassembles defective unit, using hand tools..

Education
Pryor High School - Diploma
Orchids electrical classes, Oklahoma state university
Electrical and electronics degree

Certificates & Licenses
US Army -Heavy duty machinery mechanic (62B) Army -
Plumber/ pipe fitter (52K) Army - Combat lifesaver (92B)

Driver's License
Type: Commercial, Class A
Endorsement: Passenger
Restrictions: Air Brakes, School Bus

Volunteer Experience
I love to volunteer for my kids sporting events; I have coached soccer, baseball & football.

Military Service
Oklahoma National Guard August 1992 to Aug 2001. - Honorable Discharge.
Specialist first class - heavy Equipment mechanic.
Commendations: Merit Awards and Unit Awards.

References
References provided upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1094)

Go to Search Parameters...

Brief Description

Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.

Contract Safety and Construction Inspector for companies ,such as Conoco Phillips and Shell

Objective: My main objective has always been to construct any job in a timely manner, excellent quality, and safety conscience. I like to work about 20 hours a week overtime, and I feel like I have gone as far with this company as possible.

Over ten-years of progressive experience and responsibility in the areas of Heavy Equipment Operation & Landscaping at various organizational levels

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Experienced frame and finish carpenter with cabinet experience and management experience

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

HVAC Skills

MBA and graduate Electrical Engineer with 19 years experience in EHV installations. Specialized in O&M and Project Management of mega projects like power, steel, refinery, etc.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Caterpillar Dealership, Surface and Undergound Mining Experience.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

Truck Driver/ Construction Superintendent /Customer serves /Quality /Safety Inspector

Looking for a plumbing position overseas

CAD Manager for Microstation and AutoCAD

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

COATING INSPECTOR CV

Instrument Supervisor

I HAVE BEEN INVOLVED WITH EQUIPMENT MAINTAINENCE ALL OF MY LIFE,AG/CONST BACKROUND 10 YEARS HEAVY EQUIPMENT EXPIERENCE 6 AS A FIELD TECH. LOOKING FOR AN OVERSEAS OPP.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

I know I could be a good asset to your company. I have 9 years of experience working in commercial, industrial. I have skills in various fields such as electronics, PLC work, carpentry, masonary, concrete work, mechanics, welding, and fabrication.

Electrician who posseses a wide variety of electrical knowledge

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Electrical Construction Supervisor, Electrical Superintendent, Project Management experience, 20 years experience, petrochemical, Power plant, Pupl & Paper,Hv Lv, Instrumentation, Project planning, Estimating & Tendering, HSE competent,

Front line supervisor, to train the trainer, mine development jumbo lead hand, OH@S,first aid certificate

Senior Mechanical Draughtsman(MEP)

I have multiple years of mining and heavy equipment operator experience. I am looking for a full time position.

Mechanical Fitter with 8 years of Experience

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

I have been working in the mine industry for the past 30 years. Recently reassigned to site services for DeBeers Canada Snap Lake Project. Currently gaining experience on the several sizes of Komatsu loaders, Bobcat, Dozers, Water and Fuel Truck.

Many years of experience, very detailed orientated.

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

I&C Technician with geothermal experience

Objective: To work for a company as a Supervisor/Foreman/Journeyman carpenter. To use my skills to the best of my ability.

Construction Supervisor for Electrical and Instrumentation

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

welder helper \ carpenters helper

Versatile, knowledgeable, exploration geologist

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out