Resume - More than 17 years experience in welding inspection and NDT testing. Main duties...

Misco Jobs

Resume #81107

CONTACT INFORMATION:
View contact information...

Professional Certification
: CSWIP Welding Inspector 3.1 TWI, UK.
Cert No: 30348
CSWIP Radiography Interpretation Level 2
Cert No: 32072
Ultrasonic Level 2 PCN -3.1,3.2,3.8,3.9
PCN No: 203430
ASNT Level 2 Radiography Interpretation.
ASNT Level 2 Magnetic Particle Testing.
ASNT Level 2 Dye Penetrant Testing.

Course Attended: CSWIP Welding Inspector 3.1 conducted by TWI
OIS Malaysia in-house course in UT, RT, MT,
PT and Eddy Current.
OIS Malaysia in-house course in Radiation
Safety.
Basic NDT Principles.
Malaysia AELB Level 2 Radiation Inspection.
Lost Prevention System (LPS) organized by
Exxonmobil Kuala Lumpur.
Offshore Safety, Sea Survival, Basic Fire
Fighting.
And Helicopter Underwater Escape Training
(HUET) at MAS/SEQU Training Center Kuala
Lumpur (expired).
H2S Basic Course.

Computer Literacy: Microsoft Word, Excel and Power Point.
Point of origin: Kuala Lumpur, Malaysia
Home Airport: Kuala Lumpur International Airport
Preferred work location: Malaysia
Salary: Neg.
Availability: One week notice

EXPERIENCE BACKGROUND

About 17 years been in the Oil and Gas Construction Industry for upstream and down stream works. Involved in erection, fabrication and testing of steel structural, piping (carbon steel and low alloy steel), pressure vessel, gas and oil pipeline, offshore laybarge, offshore platform upgrading work and new refinery plants.
Build up the career starting with Training QC Inspector for Structural, NDT and Piping works. Lately for the past 4 years been as General Inspector post for Petronas Carigali, Exxonmobil (EMDC), Reliance Industries of India and Murphy Oil of Malaysia. Mainly work scope are inspection, installation and erection, monitoring for steel structure/piping fabrication of topsides modules and jackets, refinery plants, vessel, pipelines, FSO and subsea structure, piping and pipelines.
Work Site – AY Engineering, Promet Fabricator, Sime Sembcorp Engineering and Malaysia Shipyard and Engineering all are located at Johore state. The other location were at Naval Dockyard and KHL Engineering at Lumut Perak, Geahin Engineering at Malacca, Kerteh Oil and Gas Terminal at Kerteh Terengganu, GPP 5 and 6 at Kerteh Terengganu, TNB Power Station at Kapar Selangor and LNG 1 at Bintulu Sarawak.
As a General Inspector, the work scope are depending on service contracts.
Scope of work briefly:
* Witnessed Welding Procedure Qualification Test and welder qualification test.
* Experience in welding inspection on piping materials such as Stainless Steel L316 and 304, Chrome-Moly and Incoloy.
* Reviewed all procedures including welding and NDT procedures.
* Able to read ISO, P&ID and GA drawings.
* Perform site quality activities in accordance with Project quality Plan.
* Work with QA/QC Lead to address Project Inspection requirements.
* Implement quality surveillance and inspection activities at construction site both for structure and piping.
* Undertake stage inspection and monitor production process for structure and piping.
* Review contractors and suppliers completion files for accuracy and adequacy.
* Attend and contribute to site and project technical meeting as necessary.
* Ensure materials (structure and piping) supplied meet the requirements of the project specifications.
* Follow the safety rules and practices and assist the site team in promoting site safety.
* Review factory acceptance test and on final quality check prior to shipment.
* Monitor and appraise suppliers and contractors Quality Assurance and Quality control activities.
* Provide early warning of potential quality problems.
* Set up personnel's for site team.
* Set up project QC work execution plan.
* Coordinate daily inspection activities for various discipline.
* Site QC surveillance during construction activity for quality control compliance verification.
Documents Review
Review the project documents such as Project Quality Plan (PQP), Inspection and Test Plan (ITP), QA documents procedure such as NDT procedures, welding procedures, welding consumables control, mechanical test, record of welder performance, IFC and as built drawings, flushing, hydrotest, reinstatement procedures, distortion control procedure, Arc burn control procedure and etc.

Management Involvement
Participated in weekly QA/QC meeting, monitor of NCRs and follow up the close out, keep the QC matters update to QA/QC Lead, give the QC input for progress report and update. Participated in Company/contractor internal audit programmed and problem solving on QC matters.

Code and Standard
Familiar with AWS D1.1, ASME 1X and V, API RP2X, API RP2W/2Z, API 1104 and ANSI B31.3.

Personal Touch
Strength - Teamwork, good communication and ability to analyze.
Expectation - Construction Supervisor and QA Engineer.
Hobby - Soccer and badminton.

Job Attachment Currently
March 2008 – Present
* Fabrication of Murphy Sabah Oil Company Kikeh Subsea Gas Pipeline End Termination (PLET) at Aker Kvaerner Yard Pulau Indah, Pelabuhan Klang, Malaysia.
Appointed as Senior Fabrication Inspector seconded to Murphy Sabah Oil Co.

Work Scope
Reports to Company Site Representative for job progress updating.
Close monitoring on construction and NDT progress base on client and project procedures.
Familiarize with applicable Codes, Standards and Client Specification and also reviewed the approved drawing for the project.
Monitor the QC matter accordingly as per ITP/PQP.
Close monitoring on construction progress structure and piping duplex stainless steel base on client and project procedures.
Coordinate work of the site inspectors.
Issuance of CAR/NCR and follow-up until close-up.
Keep CSR updated with actions and quality issues.
Highlight the issue on upfront stage.
Reviewed all welding certificates including WPS, PQR and welder certificates and also all welding equipments calibration certificates such as welding machine, backing and holding oven and also the PWHT machine.
Carried-out material receiving inspection both structure and piping duplex stainless steel (checked size, type and condition of the materials) and make sure received a copy of genuine Mill Certificates.
Checked the consumables size, type and condition. Incase Basic Electrodes make sure the electrodes were baked as per manufacture recommended. And also check batch certificate for TIG filler wire.
Monitor and carried-out fit-up inspection both structure and piping duplex stainless steel.
Monitor the pre-heating and checked the pre-heat temperature prior welding.
Checked the welding position, weaving size and welding parameter such as current, voltage and travel speed as per approved WPS both structure and piping stainless steel. For piping duplex stainless steel need to check also purging gas.
Checked the consumables and filler wire condition and storage.
Checked the inter pass temperature and make sure the inter pass temperature as per recommended WPS.
Checked safety during welding.
Monitored construction punchlist and line check, outstanding work to carry over and monitor close up.
Checked the cleanliness of the joints must free from spatter, oil or grease and checked the welder and joint identification prior to visual inspection and NDT.
Carried-out visual inspection on both structure and piping, witnessed NDT activities and reviewed RT films.
Monitor compiling of final documentations.

WORKING HISTORY BRIEFLY

May2007 – Feb2008 Fabrication of Reliance KG-D6 Subsea Structure and Piping for Reliance Industries of India at KHL yard, Lumut, Malaysia.
Appointed as NDT/Welding Inspector seconded to Bechtel PMC as a representative to Reliance Industries of India.

2006 –2007 Installation of Sumandak B Pipeline.
Baram pipeline replacement (Baram-A to Baram-G)
10km offshore pipeline replacement from MCOT to West Lutong platform at Sarawak Water Malaysia.
Installation of Sumandak-A platform and 10 km offshore pipe laying at Labuan, Malaysia.
Installation of Abu Cluster A jacket, topside and for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Terengganu water, Malaysia.
All of the above project were appointed as NDT/General
Inspector represented Petronas Carigali Sdn Bhd.

2005 - 2006 Fabrication of Jacket and Topside for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Ramunia Fabricator Bhd, Teluk Ramunia Johore, Malaysia.
Appointed as NDT supervisor represented Ramunia Fabricator Bhd Johor Malaysia.

2004 – 2005 Exxonmobil (EMDC) Producing Nigeria Oil (YOHO Topside Modules). Fabrication at Sime Sembcorp Engineering Pasir Gudang, Johore. Saipem.Sa as a main contractor (EPC-2)
Appointed as General Inspector represented Exxonmobil.

2003 – 2004 Exxonmobil (EMDC) Producing Angola Oil (Kizomba-B DrillingRig). Fabrication at Malaysia Shipyard and Engineering Pasir Gudang, Johore.Daewoo of South Korea as a main contractor (EPC-1).
Appointed as a General Inspector represented Exxonmobil.

2002-2003 Fabrication of Bintang-A and B Tripod Jackets and Topsides for EPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11DR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of JNDR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of Tapis-F Tripod Jacket and Topside for aEPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11P-A Topside, Modules, Living Quartes, Bridge and Flare Tower for Sarawak Shell Bhd at Sime Sembcorp PAsir Gudang Johore.
Fabrication of ANDP-C and E Tripod Jackets and Topsides for Petronas Carigali at Sime Sembcorp Pasir Gudang Johore.
Fabrication of YOHO Topside Development Project for Exxonmobil (EMDC) at Sime Sembcorp Engineering Pasir Gudang Johore.
All the above projects work as Ultrasonic Inspector
Represented Sime Sembcorp Engineering Pasir Gudang
Johor, Malaysia.

2001-2001 MTBE Propylene Plant at Kuantan, Pahang. Work as Ultrasonic Inspector on the Annual Shutdown represented MTBE Kuantan Pahang, Malaysia.

2001-2001 Installation of South Furious Barton Compression Module for Sarawak Shell Bhd at Sarawak offshore. Work as Structural QC Inspector represented GLOBAL/TL Offshore.

2000-2000 Fabrication of ANGSI-A Topside, Living Quarters and Modules for Petronas Carigali at Sime Sembcorp Pasir Gudang, Johore.
Work as NDT Coordinator represented Sime Sembcorp Pasir Gudang Johore, Malaysia.

2000-2000 Installation of ANDR-A Platform for Petronas Carigali at Terengganu offshore. Work as General inspector represented Petronas Carigali.

1999-2000 Fabrication of Resak Onshore Gas Terminal for Petronas Carigali at Kerteh Terengganu. Work as NDT Inspector represented Petronas Carigali.

1998-1999 Fabrication of Resak Branang Topside, MSF and Living Quarters for Petronas Carigali at Sime Sembawang Engineering Pasir Gudang, Johore. Work as UT Inspector represented Sime Sembawang Engineering Pasir Gudang Johore, Malaysia.

Fabrication of Anding-A Tripod Jacket and Topside for Petronas Carigali at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as UT Inspector represented MSE Malaysia.

1998-1998 Fabrication of Hong Kong Airport Structure at Geahin Engineering Sdn Bhd Malacca. Work as Ultrasonic Inspector represented Geahin Engineering Sdn Bhd.

1996-1998 Fabrication of Container Cranes at Naval Dockyard Lumut, Perak. Work as a 3rd Party Surveyor for Bureau Veritas Kuala Lumpur.

1995-1996 Fabrication of ASME Code Pressure Vessel at Taylor Wharton, Shah Alam Selangor. Work as NDT Coordinator represented Taylor Wharton Shah Alam.

1995-1995 LNG 1 at Bintulu Sarawak Annual Shutdown. Work as Eddy
Current Technician testing Exchanger Tubing.

1994-1995 Fabrication of Seligi C and E Jackets for EPMI at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as QC Inspector represented MSE Johore.

1993-1994 Fabrication of M1 Living Quarters for Sarawak Shell Bhd at Promet Fabricator Teluk Ramunia, Johore. Work as Structural QC Inspector represented Promet Fabricator, Malaysia.

1992-1993 Fabrication of Tembungo-A Jacket and Topside for Petronas
Carigali at AY Engineering Teluk Ramunia, Johore. Work as
Training Structural QC Inspector represented AY Engineering.

1991-1992 Fabrication of piping and structural work (spherical tanks) for
Mechmar Keppel Engineering Sdn Bhd at Klang Port Selangor. Work as NDT Trainee (UT,RT and MPI) represented Mechmar Keepel Engineering Sdn Bhd, Malaysia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1094)

Go to Search Parameters...

Brief Description

Journeyman Ironworker with exsperience in boilermaker, pipefitter work

Electronics security engineer

Work as apipe fitter for 6 years.my last work location was in new calidonia,austria for bieng finish contract

Circa 30 years work experience (13 years Middle-East / Africa)

I have extensive experience in maintenance fitting , in mining and industrial fields

multi skilled engineer

Mechanical techanician diploma

Pipe Fabricator all duties that come with shop work. Hydro Test Pipe and Numatic Test Pipe for all and any leaks.

ITI DRAUGHTSMAN MECH WITH KNOWLEDGE OF CIVIL, ARCHITECTURAL,WORKED IN BUILDINGS,ROADS ,RETAIL SECTORS WITH EXPERIENCE OF MORE THAN 9 YEARS,FLUENT IN ENGLISH.GOOD SPEED IN DRAUGHTING WORK.

Security Technician

A progressive individual with a record of excellence in the management of people, responsibly overseeing compliance of project specifications, and supervising completion of substantial commercial industrial construction projects.

Experience welder and heavy equipment mechanic

A proven Boiler Maker/ Combination Welder highly skilled in the areas of aluminum, ferrous and non-ferrous(CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

I am 56 years old married with a 32 year old step-son. Originally from California and settled here in 1984. I hold a valid La Drivers License # 006074258 and a current TWIC card. I will provide a Basic OSHA card if required for employment

Service Technician/Welder

RED SEAL certificate and CVIP endorsement HEAVY DUTY MECHANIC

Pipe Welder

I am a fully experienced plant operator of 15 years. I OPERATE 180,360 DEGREE MACHINES ALSO BULLDOZERS AND RUBBER DUCKS AND DUMPTRUCKS,I HAVE WORKED IN CONSTRUCCTION/RENTALS AND CIVIL ENGINEERING ALSO DEMOLITION THROUGHOUT THIS PERIOD.I HOLD A CURRENT CTA CARD AND PTS CARD FOR RAILWAY WORKS.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Heavy Equipment Operator

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills.

I am looking for a position in the crane and rigging field.

i am attaching herewith my resume if suitable please contact

I am a top salesman with experience in real estate, and industrial sales. I also have experience in construction as a millwright/supervisor, craft superintendent, on large projects exceeding $100 million

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Detail oriented Construction Project Manager with over 10 years of experience with Federal and Private Contracts

Senior Certificate

I am looking for contract work or 35.00 per hour. my last job was the fabrication of a chemical mixing plant 1m in parts and labor, all my jobs I was in a leadership role

Heavy Equipment Operator - I have operated Heavy Equipment since I was fourteen years of age. I also have experience in reading grades and finishing slopes. Types of equipment operated: CAT DOZERS D4H TO D11 CATSCRAPERS 621E 631E and 621F

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

To obtain employment in the construction industry.

I am seeking a position as an Electrical Project Manager/ Estimator

Computer skills (MS office/internet), blue print reading and interpretation, excellent communication skills, well organized and willing to work overtime to meet deadlines. Qualifications National Crafts Certificate in Electrical Power Engineering and Advanced Diploma in Construction Eng. Technology

I'm a metal fabricator/ Boilermaker/welder. My work consists mainly of reading and interpreting blueprints or welding process specification, operating manual semiautomatic welding equipment to fuse metal segments using processes such as MIG, TIG,MAG, ARC welding, resistance welding etc......

Instrument supervisor / technician v exp construction commissioning start up HSE

I am very interested in obtaining a position with your organization. Enclosed please find my resume for your review.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Maintenance mechanic

i am a new zealand registered electricain , my apprentiship was in substation construction and maintaince which i completed in 2006 .I currently live in london but will be moving to melbourne in the new year

Respected Sir, Please accept this letter as application for a suitable post in Sales / Marketing in your esteemed organization.

Experienced Rigger

Field Machinist/Millwright

Some offshore certificates, good knowledge of construction and offshore trades, strong worker, easy to get along with

35 YEARS ELECTRICAL ENGINEER/HV/PLC

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out