Resume - I have many years of experience working on ambulances, clinics, industrial, inte...

Misco Jobs

Resume #81380

CONTACT INFORMATION:
View contact information...

OBJECTIVE: Highly motivated Paramedic interested in employment where my skills and knowledge may be used.

EXPERIENCE:

Cedra Clinical Research
Address: 8501 N. Mopac
Austin, TX 78759
Supervisor: Rudy Arocha
Position: Technical Services Supervisor
Dates: September 2008 to April 2009

Cedra Clinical Research is a pharmaceutical research company. The Technical Services Supervisor, under the guidance of the Manager of Support Services, is responsible for assuring that Paramedics, technical support staff, supplies, and equipment are available for the conduct of a clinical research trial. In addition, review protocols and be responsible for working with a study team to set up technical procedures and ensure that staff has been trained for all procedures. Also ensured that studies are adequately staffed and appropriate procedure locations are assigned. The Technical Services Supervisor is proficient in all technical and administrative procedures following CEDRA Clinical Research procedures and study protocol requirements.

Preferred Ambulance Service

Address: 5233 IH-37
Corpus Christi, TX 78404
Supervisor: Ed Daniels
Position: Operations Supervisor
Dates: August 2007 to September 2008

Preferred Ambulance Service provides emergency and non-emergency transfers to area facilities. Primary job duties were to manage operations for the district office. Manage scheduling and payroll.

Gemini Ambulance Service

Address: 1959 Saratoga
Corpus Christi, TX 78412
Phone: (361) 241-9111
Supervisor: Adan Blanco
Position: EMT-Paramedic
Dates: August 2005 to August 2007

Primary job duties included maintaining adequate supply of equipment on ambulances. Ensured proper patient care was always provided at the highest pre-hospital setting. Transported critical and non-emergent patients to area facilities.

Walsh Offshore

Address: 2955 Ridgelake Dr.
Metairie, LA 70002
Phone: (800) 468-7452
Supervisor: Don Perry
Position: EMT-Paramedic
Dates: November 2006 to April 2007

Provided remote emergent and non-emergent care on an international salvage vessel in the Gulf of Mexico that repairied oil wells damaged from hurricane Katrina. Managed medical care for 120 multi-international personnel on board. Performed physicals for divers before and after saturation on deep dives. Field diagnosed and treated multiple injuries and illnesses on board. Prescribed antibiotics and injections. Maintained track of P.O.B.

Halliburton-KBR

Address: Houston, TX
Phone: (713) 676-8758
Supervisor: Justin Oakerson
Position: EMT-Paramedic
Dates: January 2005 to August 2005

Job duties included providing emergency care in multiple situations to expatriates, host country nationals, and NATO forces in a war zone located in Eastern Europe. Provided clinical care to patients with minor injuries in a small clinic. Treated illnesses, prescribed medications, and administered immunizations. Maintained an adequate supply of stock in the clinic and ambulances. Supervised six emergency medical technicians.

Tri-County EMS

Address: 117 First St
Ingleside, TX 78362
Phone: (361) 776-0025
Supervisor: Steve Knight
Position: EMT-Paramedic
Dates: December 2002 to January 2004

Provided advanced life support care in a high paced emergency environment. Transported patients to area medical facilities.

Edde Drilling

Address: Houston, TX
Phone: (361) 492-9376
Supervisor: Steve Bowling
Position: Derrickman
Dates: April 2001 to December 2002

Performed work on oil rigs. Maintained mud pumps and mud in mud pit.

EDUCATION:

Rue Education

Address: Clearwater, FL
Degree: Registered Nurse
Dates: 2008 to Present

Aransas County EMS

Address: 1201 Enterprise
Rockport, TX 78316
Phone: (361) 729-2112
Degree: Emergency Medical Technician-Basic
Dates: September 1999 to December 1999

Coastal Bend College

Address: 3409 12th St.
Kingsville, TX
Phone: N/A
Degree: Emergency Medical Technician-Intermediate
Dates: February 2000 to April 2000

Aransas County EMS

Address: 1201 Enterprise
Rockport, TX 78316
Phone: (361) 729-2112
Degree: Emergency Medical Technician-Paramedic
Dates: February 2001 to December 2002

CERTIFICATION:

Certified: Texas EMT-P
Certification Number: 129766
Expires: 11/30/12

Advanced Cardiac Life Support
Expires: 05/10

CPR
Expires: 01/11

Drager 7410 Breathalyzer
Certified Class B Trainer/Instructor
Expires: 06/09

Valid U.S.A. Passport

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1080)

Go to Search Parameters...

Brief Description

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

To pursue my career in the field of Construction/Consulting/Project Management Services as a Projects team member, with a challenging and competitive work environment that best utilizes my technical Skills, Experience and Enthusiasm.

As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

Blueprint Reading - Mig, arc and gas welding

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Plant / Substations Operation, Maintenance and Testing

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Security, life support, camp management, logistics

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Truck Driver with experience in oil field activites.

Electrical engineer (2 years experience),researcher(1 year experience)

I am a motivated graduate with qualifications in Geological Engineering, Applied Petroleum Geoscience and Quantity Surveying and I am proactive, confident with excellent communicative skills. I am flexible in my approach work, accurate and punctual. I am focussed and motivated with eye for details

I am a seasoned QMS Internal & External Auditee, a trained QMS Internal Auditor and Document Controller, currently managing the implementation of ISO 9001:2008 (QMS) for a company in Nigeria. I have over five years experience in both Oil and Gas industry and Insurance Company working as document con

Strong English verbal and written communication skills • Specialized knowledge in MS Office suite- Outlook, and filling out DD Forms • Computer literacy in word processing, database maintenance, and spreadsheet software

Instrumentation and Controls Engineer

I have worked in the construction field for the past 11 years in every element mother nature could throw at us. I also have alot of experiance with the day to day up keep of tractors and large trucks, and some wielding/fabricating work aswell.

Mechanical Engineer with excellent interpersonal and computer skills, a strong supervisor able to train and motivate teams to peak performance.

Professional ROW Agent and Landman

Free! Esri Software Senior Developer

I perform a variety of duties as well as working in a collaborated team player environment; 3 plus years of experience in clerical work as well as Customer Service work; Ensure that the necessary quality records are specified, generated and controlled in accordance with the appropriate procedures;

Senior manager with extensive experience in the development and management of information technology and data communications operations. Skilled in designing, building and operating wireless networks. Excellent background in the integration of multiple technologies in a single network platform.

More than 10 years of experience in senior positions as Financial controller /company secretary in various reputed companies including external role as consulting company secretary/financial consultant.

Secure a position within the maritime industry that will benefit from my excellent technical, professional and leadership skills as well as my education and license qualifications.

Mining engineer with special passion for drill and blast operations but experience of many aspects of contemporary mining/rockworks operations. International experience and excellent language skills.

Recently graduated, trained in Auto CAD and Microstation.

Overall my known skills cover the realm from operating sophisticated computer equipment, data modeling and statistical programs, as well as, more traditional work related skills. From builing and designing landscapes and homes, to construction of reclaimed habitat, I have a varied skill set.

Safety Representative.

Working for about 9 years with multinational construction companies and consultancy firms in large scale international projects is my solid base upon which I became a Professional Civil Engineer. Aware by Quality and Safety Management Systems, Civil Engineering International Codes and standards.

Having exp. in fabrication, workshop (100tonpower press) components production, fabrication of structures, industrial sheds as per drawing (supervision of the work), greenhouses components designing for dies, manufacturing erection (100% nut, bolt system), confident in any work, since 12 years

MS- DOS, Windows 9x, Windows XP, Windows 2000 Professional, Windows 2000/2003 Server, MS- Office 2007, Open Office, MS Outlook, Outlook Express 2003, Adobe Indesign, Photoshop

Asphalt Supervisor / QC Manager / Foreman / Asphalt Paving 2 Tech / Plant 2 Tech / Asst. Proj. Manager

Several years experience in the electrical and electronic field. Experienced in installing, troubleshooting and repairing electrical and electronic units. Maintained and serviced Telecommunication systems and Data communication equipment.

With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality

Senior Piping Designer/Construction Engineer - office and field

(Auto CAD Technician / Welder) 2-D Mechanical, 2-D Architectural, 3-D Sectional Drawings of Mechanical Engineering Parts etc.

Supervised KBR Power Generation WestSite of LSA Anaconda and recorded preventive maintenances according to ACO and SOP and supported military with over 1000 generators

I have many years of experience working on ambulances, clinics, industrial, international and remote environents.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out