Resume - Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, G...

Misco Jobs

Resume #81418

CONTACT INFORMATION:
View contact information...

Qualifications:
Certificate III in Engineering (Heavy Fabrication)
No. 9928200 (attached)
Forklift Ticket: WL 1656308
Blue Card QLD: 0781079
Blue Dog Training W.A: 196863
Elevated Work Platform Ticket: (attached)
Working at Heights Ticket Cert.: 51364 (attached)

Work History:

November 2008- December 2008

United Group Resources:
Pilbara Iron Ore & Infrastructure Project
Cloudbreak Mine, Western Australia.
Tradesman Boilermaker: FIFO

Boilermaking duties on the construction project.
Duties included Fabricating and installing hand rails and grid walkway mesh, Fabricating different types of steel beam sections to site drawing specification, Fabricating water pipes for infrastructure, ranging from 150dia to 400dia pipe.

April 2008 – October 2008 Goldmont Boilermakers
Kalgoorlie, Western Australia
Tradesman Boilermaker

Heavy earthmoving equipment repairs which include bucket repairs, CAT 785 and 793 tray repairs, Excavators, Loaders, Graders and Dozers. On site work at local mines such as Black swan, St.Ives, KCGM, As well as general boilermaking duties in our workshop.

August 2005 – March 2008 Kador Engineering
Rocklea, Brisbane
Tradesman Boilermaker employed through Precision Labour Hire:
Brisbane

Fabricating and welding dump truck bodies (Komatsu 785 and 830E
Bodies as well as Hitachi Euclid 4500 Bodies).
Fabricating and welding of a 300T Swing Axle Low Loader)
All welding done with Flux Core Wire (Kobe DWA-50, 1.2 – 1.6mm)

Resume- Luke Daniell -2-

March 2005 - August 2005: United KG
Gove, Northern Territory

Employed as a Boilermaker to work within teams to carry out
Maintenance and repairs to the Alcan Alumina refinery. Fly in/fly out from Brisbane.
6 weeks on/ 1 week off.

Nov. 2003 – March 2005: Kador Engineering
Rocklea, Brisbane
Tradesman Boilermaker employed through Precision Labour Hire:
Brisbane

Fabricating and welding dump truck bodies and 300 Tonne Swing
Axle low loader and tanks. All welding done with Kobe DWA-50 1.2/1.6mm flux core wire and Kobe MXA-100 1.6mm wire.
Welding done in all positions.

Oct. 6th 2003 – Nov. 2003 JJ Richards & Sons
Underwood, Brisbane
Tradesman Boilermaker employed through Precision Labour Hire:
Brisbane

Fabricating multi-lift trailers.

Aug. 2003 – Oct. 2003 Premron Engineering – Gladstone
Tradesman Boilermaker

Project: Contract work for Bechtel project. Contract finished

Jan. 2003 – Aug. 2003 Walkers/EDI Rail – Maryborough 4650
Tradesman Boilermaker

Projects Worked On:

. Rubbish Digesters: Cairns City Council
. Dragline Upper Deck – P&H Draglines
. Tilt Trains
. Rail Acid tanks
. Kinana Sugar Cane Trailers for Semi-trailers

Resume Luke Daniell -3-

Jan. 1999 – Jan. 2003 Walkers Pty Ltd – Maryborough 4650
Appr. Boilermaker – Engineering (Heavy Fabrication
Certificate III)

Modules Completed: Communication & Industrial Relations,
Occupational Health & Safety, Materials Handling, Electrical
Fundamentals, Welding & Thermal Cutting, Fabrication
Techniques 1, Engineering Drawing Interpretation 1, GMAW1 –
Gas Metal Arc Welding 1, Fabrication Structural 1. MMAW1 –
Manual Metal Arc Welding 1. GTAW1 – Gas Tungsten Arc
Welding, GMAQ2 – Gas Metal Arc Welding 2, GMAW3 – Gas
Metal Arc Welding 3, Thermal Cutting and Associated Processes,
Material Science, Geometric Development, Fabrication
Cylindrical 1, Fabrication Structural 2. Quality Concepts,
MMAW2 – Manual Metal Arc Welding, MMAW3 – Manual
Metal Arc Welding 3, Fabrication Cylindrical 2, Fabrication
Conical 1, Fabrication Conical 2, Fabrication Transitions 1
(Concentric), Fabrication transitions 2 (Offset), Fabrication
Structural 3.

Proficient at:. Mig and stick welding
. Ultrasonic and x-ray tested welding
. Air Arc gouging
. Reading and fabricating from drawings.
. Pressure Welding up to 200 kPa
Inner -shield mig welding
Pipe fitting

Referees:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1093)

Go to Search Parameters...

Brief Description

Technical Project Manager

API 510 / CSA Level 1 Welding Inspector. Construction Coordinator

Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

As you will see from the enclosed details I am a qualified and highly experienced hands-on Corrosion, Coating and Insulation Professional with + 20 years extensive onshore and offshore experience within the construction, oil & gas and petrochemical industries in both the Netherlands and abroad.

my jobs

Mechanical Technician for oil and gas rotating equipment Electro Mechanic Technician for Domestic and Industrial HVAC Equipment.,NDT UTI and MTI LEVEL – II (Welding non destructive testing),

Apprenticed rigger with vast skills gained over 28 years,qualifications = resin socketing,crane/winch operator deck foreman,lifting gear coding,inspection ,certification.rig mechanic,rigging instructor

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

over 11 years of heavy equipment operation experience in multiple industries.

Piping Supervisor : Large bore & Instrument pipework/ Oil&Gas/ Nuclear/ Refinery/Offshore and Abroad

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

Workshop / Fleet manager over 20 years experience

Free! Over 10 years Project Management, Engineering and Construction experience, Confident using Autocad, sketch-up, Microsoft office and Coreldraw to complete projects successfully , Skilled in drafting and preparation of shop drawings , A hardworking individual that enjoys new challenges , Can offer sal

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Chemical engineer with 17 years petrochemical work experience with experienece in Oracle VB6 , AutoLISP

Nanagement engineer power utilities oil gas construction

Regional Manager for GSM site construction, Registered Civil Engineer, AutoCADD detail supervisor

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

Basic operational skills of the track hoe including safety procedures. Use of the engineer's level. Measurement of cross slope embankment and trench grade line using steel tape and level. Reading and understanding blueprints. Additional training on the backhoe and bulldozer.

Maintenance, water purification, reverse osmosis, materials, logistics, management

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

Welder or Welder Supervisor

80 Hour Certification, 10+Years experience Construction, Light Mechanical Experience, 8+ Years Heavy Equipment Experience

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

I am a heavy equipment specialist. I repair all types of earthmoving equipment. My strong suit is welding and fabrication.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

Experienced Design Engineer

Procurement Manager with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology for onshore/offshore rigs and office operations in Procurement, Warehousing and Logistics.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

I desire a position as manager or associate manager to help grow and expand the company. My experiences so far include the former establishment of a home based import/export business with experiences in cultural behavior and product negotiations with foreign companies.

Channel sales, Institutional sales, Oem sales, Business development, International sales

Software Developer .NET, Java SQL

Crane operator and Driver

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Contracts Manager

Process Plant Manager, Metallurgical Management, Production Manager, Chief Sorter and Certified Flow-Sort X-Ray Machine operator.

Project control engineer with experience in planning and cost engineerig fields.

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Extensive and progressively responsible hands-on management experience.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out