Resume - Work as apipe fitter for 6 years.my last work location was in new calidonia,aust...

Misco Jobs

Resume #81456

CONTACT INFORMATION:
View contact information...

Personal Data
Date of Birth: April 30, 1962
Place of Birth: Batangas City
Age: 46
Height: 5'3"
Weight: 120 kg.
Marital Status: Married
Nationality: Filipino
Religion: Catholic
Passport No.: QQO775041
Date of Issue: August 05, 2005
Expiry Date: August 05, 2010
Place of Issue: Lucena City

Educational Background
________________________________________

ELEMENTARY: CALICANTO ELEMENTARY SCHOOL
Batangas City (1969-1975)

SECONDARY: BATANGAS NATIONAL HIGH
SCHOOL
Batangas City (1975-1979)

COLLEGE: PABLO BORBON MEMORIAL
INSTITUTE OF TECHNOLOGY
Batangas City (1979-1981)

Working Experience
________________________________________

I.
Year: August 31, 2007 – February 16, 2009
Position: Pipe fitter
Employer: E.E.I. Goro Nickel Project
Address: New Caledonia, France
Duties and Responsibilities
- Fabrication, erection and installation and pipe layout.
- Conducted hydro testing and air testing of all fabricated spools.
- Installation of different value and bolting as required.

II.
Year: August 08, 2003 – April 30, 2004
Position: June 03, 2004 – February 15, 2006
Employer: Brown and Root Industrial Services Phil.
Address: PSPC Tabangao, Refinery
Batangas City
Duties and Responsibilities
- Perform blinding / spading of process line.
- Overhaul repairs of detective valve.
- Beveling of various all pipes.
- Locate and prepare all piping spools and support needed erection.
- Responsible for material take. Off of piping material for fabrication and erection.
- Tightening of bolts in a right procedure.

III.
Year: November 04, 1999 – May 15, 2000
July 10, 2000 – February 10, 2000
Position: Pipe fitter / Pipe line spacer
Employer: Mc Connell Dowell Phil. Inc.
Address: Calabarzon, Batangas City
Duties and Responsibilities
- Assigned to tie in the 24 inches pipe from shell to Ilijan pumping station.
- Put internal and external clamp.
- Cut and grind according to the isometric drawing.

IV.
Year: August 29, 1997 – July 09, 1998
Position: Pipe fitter
Employer: Sukwon Ipche Engineering (m) SDN
Terengganu, Malaysia

Duties and Responsibilites
- Read and interpret drawing plan.
- Fabricate and install pipes on different elevation.
- Repair, recondition, hydro testing of coolers, sea water air cooler, fresh water, tube coil cooler.

V.
Year: March 18, 1996 – December 14, 1996
Position: Pipe fitter
Employer: Trusty Engineering Const. Pte. LTD.
Address: Pulauayer Merbau, Singapore
Duties and Responsibilities
- Fabrication, erection and installation of pipes.
- Conducted hydro testing and air testing of all fabricated spools.
- Installation of different valve and bolting as required.
- Responsible for material take. Off of piping material needed or fabrication or erection.

VI.
Year: July 04, 1994 – October 03, 1994
Position: Pipe fitter
Employer: Interbeton Int'l Philippines Inc.
Address: Pilipinas Shell Petroleum Corp.
Duties and Responsibilities
- Installed lines of steam tracing.
- Fit up small bore up to a big bore pipe. Cutting, grinding, and beveling of pipes prior to fit up.

VII.
Year: December 19, 1992 – March 12, 1994
Position: Pipe fitter
Employer: Belleli Saudi Heavy Industries LTD.
Address: Jubail, Saudi Arabia
Duties and Responsibilities
- Read and interpret the piping plan and isometric drawing.
- Erection and installation of pressurized pipe at any installation.
- Have knowledge of installation of pipe supports such as pipe shoe, anchor support, dummy support, and etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1096)

Go to Search Parameters...

Brief Description

Journeyman Ironworker with exsperience in boilermaker, pipefitter work

Electronics security engineer

Work as apipe fitter for 6 years.my last work location was in new calidonia,austria for bieng finish contract

Circa 30 years work experience (13 years Middle-East / Africa)

I have extensive experience in maintenance fitting , in mining and industrial fields

multi skilled engineer

Mechanical techanician diploma

Pipe Fabricator all duties that come with shop work. Hydro Test Pipe and Numatic Test Pipe for all and any leaks.

ITI DRAUGHTSMAN MECH WITH KNOWLEDGE OF CIVIL, ARCHITECTURAL,WORKED IN BUILDINGS,ROADS ,RETAIL SECTORS WITH EXPERIENCE OF MORE THAN 9 YEARS,FLUENT IN ENGLISH.GOOD SPEED IN DRAUGHTING WORK.

Security Technician

A progressive individual with a record of excellence in the management of people, responsibly overseeing compliance of project specifications, and supervising completion of substantial commercial industrial construction projects.

Experience welder and heavy equipment mechanic

A proven Boiler Maker/ Combination Welder highly skilled in the areas of aluminum, ferrous and non-ferrous(CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

I am 56 years old married with a 32 year old step-son. Originally from California and settled here in 1984. I hold a valid La Drivers License # 006074258 and a current TWIC card. I will provide a Basic OSHA card if required for employment

Service Technician/Welder

RED SEAL certificate and CVIP endorsement HEAVY DUTY MECHANIC

Pipe Welder

I am a fully experienced plant operator of 15 years. I OPERATE 180,360 DEGREE MACHINES ALSO BULLDOZERS AND RUBBER DUCKS AND DUMPTRUCKS,I HAVE WORKED IN CONSTRUCCTION/RENTALS AND CIVIL ENGINEERING ALSO DEMOLITION THROUGHOUT THIS PERIOD.I HOLD A CURRENT CTA CARD AND PTS CARD FOR RAILWAY WORKS.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

I am qualified in operating, pipefitting, welder's helping, laboring, parts, and mechanic helping.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

Heavy Equipment Operator

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills.

I am looking for a position in the crane and rigging field.

i am attaching herewith my resume if suitable please contact

I am a top salesman with experience in real estate, and industrial sales. I also have experience in construction as a millwright/supervisor, craft superintendent, on large projects exceeding $100 million

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Detail oriented Construction Project Manager with over 10 years of experience with Federal and Private Contracts

Senior Certificate

I am looking for contract work or 35.00 per hour. my last job was the fabrication of a chemical mixing plant 1m in parts and labor, all my jobs I was in a leadership role

Heavy Equipment Operator - I have operated Heavy Equipment since I was fourteen years of age. I also have experience in reading grades and finishing slopes. Types of equipment operated: CAT DOZERS D4H TO D11 CATSCRAPERS 621E 631E and 621F

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

To obtain employment in the construction industry.

I am seeking a position as an Electrical Project Manager/ Estimator

Computer skills (MS office/internet), blue print reading and interpretation, excellent communication skills, well organized and willing to work overtime to meet deadlines. Qualifications National Crafts Certificate in Electrical Power Engineering and Advanced Diploma in Construction Eng. Technology

I'm a metal fabricator/ Boilermaker/welder. My work consists mainly of reading and interpreting blueprints or welding process specification, operating manual semiautomatic welding equipment to fuse metal segments using processes such as MIG, TIG,MAG, ARC welding, resistance welding etc......

Instrument supervisor / technician v exp construction commissioning start up HSE

I am very interested in obtaining a position with your organization. Enclosed please find my resume for your review.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

Maintenance mechanic

i am a new zealand registered electricain , my apprentiship was in substation construction and maintaince which i completed in 2006 .I currently live in london but will be moving to melbourne in the new year

Respected Sir, Please accept this letter as application for a suitable post in Sales / Marketing in your esteemed organization.

Experienced Rigger

Field Machinist/Millwright

Some offshore certificates, good knowledge of construction and offshore trades, strong worker, easy to get along with

35 YEARS ELECTRICAL ENGINEER/HV/PLC

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out